15-006243

15-006243 Datasheet

15-00624o CONEC ABC

Part	Datasheet
15-006243	15-006243 (pdf)

PDF Datasheet Preview
AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. POS. 1 POS. 6 30,88 +0,3 - 0,15 +0,12 - 0,13 16,81 +0,23 - 0,02 +0,3 - 0,15 12,8 10° 10,66 +0,4 - 0,3 n1,12 9x SEALING COMPOUND +0,12 - 0,18 +0,25 -0 2,55 5,64 8,23 +0,25 -0 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR SEALING GASKET 4-40 UNC 15-00624o CONEC ABC SEE NOTE 13 4,6 9,4 4-40 UNC SW4,8 RoHS compliant E THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND RECOMMENDED SOLDER INSTRUCTION SEE SHEET 2 IP RATING IP 67 SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER SOLDERING METALSHELL ZINC DIE CAST min. 50µin NICKEL PLATING over COPPER INSULATORS PBT GF UL 94 V-0 BLACK SEALING GASKET SILICONE 70 SHORE A BLUE RUBBER GASKET TPE BLACK SEALING COMPOUND EPOXY RESIN UL 94 V-0 BLACK CONTACTS COPPER ALLOY PLATING SEE PART-NO. : o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for GOLD FLASH over NICKEL SOLDER CUP ACCEPTS CABLE AWG 20 HEXLOCKING SCREWS STAINLESS STEEL RECOMMENDED PANEL CUT-OUT ON SHEET 2 RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm in.LB / max.67Ncm 6 in.LB CONNECTOR IS PART MARKED 15-00624o CONEC ABC see note 9 tolerance scale: 2:1 5:1 material: SEE NOTES dim. in mm name

PDF Datasheet Preview

AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD.

POS. 1 POS. 6
30,88
+0,3 - 0,15
+0,12 - 0,13
16,81
+0,23 - 0,02
+0,3 - 0,15
12,8
10°
10,66
+0,4 - 0,3
n1,12 9x

SEALING COMPOUND
+0,12 - 0,18
+0,25 -0
2,55
5,64
8,23
+0,25 -0

RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR

SEALING GASKET
4-40 UNC
15-00624o CONEC ABC

SEE NOTE 13
4,6 9,4
4-40 UNC

SW4,8

RoHS compliant E

THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH

DO NOT ALTER CAD DRAWING BY HAND

RECOMMENDED SOLDER INSTRUCTION SEE SHEET 2 IP RATING IP 67 SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI

FOR 30 MINUTES AFTER SOLDERING METALSHELL ZINC DIE CAST min. 50µin NICKEL PLATING over COPPER INSULATORS PBT GF UL 94 V-0 BLACK SEALING GASKET SILICONE 70 SHORE A BLUE RUBBER GASKET TPE BLACK SEALING COMPOUND EPOXY RESIN UL 94 V-0 BLACK CONTACTS COPPER ALLOY PLATING SEE PART-NO. :
o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for GOLD FLASH over NICKEL SOLDER CUP ACCEPTS CABLE AWG 20 HEXLOCKING SCREWS STAINLESS STEEL RECOMMENDED PANEL CUT-OUT ON SHEET 2 RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm in.LB / max.67Ncm 6 in.LB CONNECTOR IS PART MARKED 15-00624o CONEC ABC see note 9
tolerance
scale:
2:1 5:1
material:

SEE NOTES
dim. in mm
name

More datasheets: NTCS0603XX104JXT | NTCS0603XX473JHT | NTCS0603XX153JMT | DS1702K | 414 | M13155 SL002 | M13155 SL005 | M13155 SL001 | CY25819SXCT | CY25819SXC

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 15-006243 Datasheet file may be downloaded here without warranties.

Datasheet ID: 15-006243 506507