SB540E-G

SB540E-G Datasheet

SB520E-G thru SB5100E-G

Part	Datasheet
SB540E-G	SB540E-G (pdf)

Related Parts	Information
SB5100E-G	SB5100E-G

PDF Datasheet Preview
Low VF/ESD Leaded Schottky Barrier Rectifiers SB520E-G thru SB5100E-G Voltage Range 20 to 100 V Current A "-G" RoHS Device • Low drop down voltage • 5.0A operation at TA=75°C with no thermal runaway • For use in low voltage, high frequency invertors free wheeling and polarity protection • Silicon epitaxial planar chips • Electrostatic discharge ESD test under IEC61000-4-2 standard >15KV air & 8KV contact • Lead-free part, meet RoHS requirements MECHANICAL DATA • Case Molded plastic body DO-201AD • Epoxy UL94-V0 rated flame retardant • Terminals Solderable per MIL-STD-750 Method 2026 • Polarity Color band denotes cathode end • Mounting Position Any • Weight ounces, grams DO-201AD Min. 7 5 9 8 7 Min. Unit :inch mm MAXIMUM RATING AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified Symbols 520E 540E 545E 550E 560E 580E 5100E Units VRRM 20 40 45 50 60 80 100 Volts Maximum RMS Voltage VRMS 14 28 30 35 42 56 70 Volts Maximum DC Blocking Voltage VDC 20 40 45 50 60 80 100 Volts Maximum Average Forward Rectified Current 12.7mm lead length at TA=75°C, See Figure 1 Peak Forward Surge Current 8.3mS single half sine-wave superimp osed on rated load JEDEC Me thod TL=110°C Maximum Forward Voltage at 5.0A Note 1 IAV IFSM TA= 25°C TA=100°C Typical Junction Capacitance Note 2 Amps Amps Volts mA pF Typical Thermal Resistance Note 3 °C/W Operating Junction Temperature Range -65 ~ +125 -65 ~ +150 Storage Temperature Range TSTG -65 ~ +150

PDF Datasheet Preview

Low VF/ESD Leaded Schottky Barrier Rectifiers

SB520E-G thru SB5100E-G

Voltage Range 20 to 100 V Current A
"-G" RoHS Device
• Low drop down voltage
• 5.0A operation at TA=75°C with no thermal runaway
• For use in low voltage, high frequency invertors free
wheeling and polarity protection
• Silicon epitaxial planar chips
• Electrostatic discharge ESD test under IEC61000-4-2
standard >15KV air & 8KV contact
• Lead-free part, meet RoHS requirements

MECHANICAL DATA
• Case Molded plastic body DO-201AD
• Epoxy UL94-V0 rated flame retardant
• Terminals Solderable per MIL-STD-750 Method 2026
• Polarity Color band denotes cathode end
• Mounting Position Any
• Weight ounces, grams

DO-201AD

Min.
7 5 9 8 7

Min.

Unit :inch mm

MAXIMUM RATING AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified

Symbols 520E 540E 545E 550E 560E 580E 5100E Units

VRRM 20 40 45 50 60 80 100 Volts

Maximum RMS Voltage

VRMS 14 28 30 35 42 56 70 Volts

Maximum DC Blocking Voltage

VDC 20 40 45 50 60 80 100 Volts

Maximum Average Forward Rectified Current 12.7mm lead length at TA=75°C, See Figure 1

Peak Forward Surge Current
8.3mS single half sine-wave superimp osed on rated load JEDEC Me thod TL=110°C

Maximum Forward Voltage at 5.0A Note 1

IAV IFSM

TA= 25°C

TA=100°C

Typical Junction Capacitance Note 2

Amps

Amps

Volts mA pF

Typical Thermal Resistance Note 3
°C/W

Operating Junction Temperature Range
-65 ~ +125
-65 ~ +150

Storage Temperature Range

TSTG
-65 ~ +150

More datasheets: AEE04F24-197 | FQP90N08 | 18476USA | FDU8782 | FDD8782 | 5690F55 | 5690F11 | 5690F77 | 5690F33 | 5690F53

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SB540E-G Datasheet file may be downloaded here without warranties.

Datasheet ID: SB540E-G 506272