DCDM-21S6E5-18.0S

DCDM-21S6E5-18.0S Datasheet


CONTENTS Custom Capabilities 4 All-Plastic - DCDA 5-8 Metal Shell - DCDM - DCCM 9-12 Mounting Hardware. 13-14 Metal Shell Terminal Block 15-19 MIL-C-83513 Metal Shell 20-23 MIL-C-83513 Plastic Shell 24-26 MIL-C-83513 Terminal Block 27-30 MIL-C-83513 Mounting Hardware 31 Connector Saver All Plastic & Metal Shell 32 Microedge Connectors 33-36 Strip Connectors 37-38 Back Shells - MMBS 39 JackMate Connectors 40-42

Part Datasheet
DCDM-21S6E5-18.0S DCDM-21S6E5-18.0S DCDM-21S6E5-18.0S (pdf)
Related Parts Information
DCDM-51P6E5-18.0S DCDM-51P6E5-18.0S DCDM-51P6E5-18.0S
PDF Datasheet Preview
Dura-Con Catalogue

SOLUTIONS THAT CONNECT
2012 EDITION

Dura-Con Micro D Connectors

WE IGHT A N D SPAC E Dense centreline spacing and lightweight materials make Dura-Con the ideal connector where weight and space must be kept to a minimum while maintaining maximum reliability.

SHO C K AN D V IBR AT I O N The Cinch Dura-Con contact, due to its low mass, provides electrical continuity under extreme conditions of shock and vibration.

HIG H R E L IABIL IT Y T W I ST PI N C ON TA C T The heart of the Dura-Con system is the twist pin contact. This contact is made from a precision miniature spring cable with a welded tip. The expanded cable creates a helix of seven spring members around the pin maintaining contact with the socket no matter what radial forces are applied. This spring cable can withstand many flex cycles without exhibiting any evidence of metal fatigue. Reliable mating is further ensured by protecting the pin contact in a tightly controlled recessed cavity.

AP PL I C AT ION S Cinch Dura-Con connectors are MIL-DTL-83513 qualified and are used in missile systems, avionics, radar, minefield, space defence and many other military applications where reliability is crucial. This highly adaptable design has also seen many commercial applications including medical, telecommunications, computer, down-hole and transportation.

TER M I N AT I O N O PT I O N S Insulated Wire Available in 24 to 30 gauge wire at custom lengths specified by the customer. Uninsulated Wire Allows greater flexibility when installing the connector. Available in 24 to 28 gauge wire. Solder Cups Used in applications that require the lowest contact resistance and require termination by the customer

D U R A - C O N M I C R O M I N I AT U R E C O N E C T O R S

CONTENTS Custom Capabilities 4 All-Plastic - DCDA 5-8 Metal Shell - DCDM - DCCM 9-12 Mounting Hardware. 13-14 Metal Shell Terminal Block 15-19 MIL-C-83513 Metal Shell 20-23 MIL-C-83513 Plastic Shell 24-26 MIL-C-83513 Terminal Block 27-30 MIL-C-83513 Mounting Hardware 31 Connector Saver All Plastic & Metal Shell 32 Microedge Connectors 33-36 Strip Connectors 37-38 Back Shells - MMBS 39 JackMate Connectors 40-42

DURA-CON

Custom Capabilities:

Standard Cinch Dura-Con connectors satisfy a wide variety of applications. Cinch’s line of DuraCon D-microminiature connectors is one of the most versatile in the industry.

Cinch approaches your business with a welldefined goal to ensure the integrity of your design and to execute our contribution to it in a responsible, cost-effective manner.

There are over 50,000 possible combinations of Cinch standard options such as connector type, size, materials, hardware, and termination. When special application requirements arise, Cinch Dura-Con connectors take this versatility to the next level.

This philosophy has led Cinch to a position of industry leadership. For complete information regarding the total capabilities of the Dura-Con connector series, or for custom application assistance, contact your nearest Cinch Connectors sales office.

Whether specific needs entail new variations of simple end-to-end connector assemblies or more complex and intricate harness assemblies, Cinch Connector Division has the state-of-the-art engineering resources and research facilities in place to meet your needs.

DURA-CON HIGH RELIABILITY ALL-PLASTIC
1.27mm Density Solder Cup/Wire D-Microminiature

DURA-CON HIGH RELIABILITY ALL-PLASTIC
1.27mm Density Solder Cup/Wire D-Microminiature

Typ. Reference
9 Contacts
15 Contacts
21 Contacts
25 Contacts
31 Contacts
37 Contacts
Ordering Information
51 Contacts

DC D A 37 P 6 E 2 K

Cinch Dura-Con D Connector Insulator Type D = Thermoplastic Glass Reinforced

Mounting Type A = Screw Mount Flange B = Clip Mount Flange

No. of Contacts 9, 15, 21, 25, 31, 37, 51

Contact Type P = Pin Plug S = Socket Receptacle

Wire Size in AWG 4 = 24, 5 = 25, 6 = 26, 8 = 28, 0 = 30 or S = Solder Cup Stranded wire available in even number sizes only.

Wire Type C = Solid Copper uninsulated E = MIL-W-16878/4, 7 Strand NEMA HP3 F = MIL-W-16878/6, 7 Strand NEMA HP3 G = MIL-W-16878/4, 19 Strand NEMA HP3 H = MIL-W-16878/6, 19 Strand NEMA HP3 K = Insulated Wire per SAE-AS 22759/11 L = Insulated Wire per SAE-AS 22759/19

MIL-C-83513/5-02 S = Jackscrew, Slot Hd., Low

MIL-C-83513/5-05 H = Jackscrew, Hex. Hd., High

MIL-C-83513/5-03 J = Jackscrew, Slot Hd., High

MIL-C-83513/5-06

Lead Length in Inches*** Solid copper wire only Solid copper wire only Solid copper wire only Stranded wire only Stranded wire only Stranded wire only Stranded wire only

Insulation, Colour or Wire Finish 1 = White 2 = Yellow 3 = Tin Plated 4 = Gold Plated 5 = Colour Coded per MIL-Std. 681,

System
** See p. 13 for standard hardware dimensions. See p. 14 for non-standard hardware and p. 31 for MIL hardware, both sold separately. *** Length Tolerance solid wire = ± 3/32", standard wire = ±

DURA-CON HIGH RELIABILITY ALL-PLASTIC
1.27mm Density Solder Cup/Wire D-Microminiature

DURA-CON HIGH RELIABILITY ALL-PLASTIC
1.27mm Density Solder Cup/Wire D-Microminiature

DURA-CON HIGH RELIABILITY M E TA L S H E L
1.27mm Density Solder Cup/Wire D-Microminiature

DURA-CON HIGH RELIABILITY M E TA L S H E L
1.27mm Density Solder Cup/Wire D-Microminiature

Typ. Reference
9 Contacts
15 Contacts
21 Contacts
25 Contacts
31 Contacts
37 Contacts
19 36
Ordering Information
51 Contacts
35 27 52
100 Contacts

DC D M 37 P 6 E 2 K N
51 75

Cinch Dura-Con D Connector Insulator Type C = Diallyl Phthalate Glass Reinforced D = Thermoplastic Glass Reinforced

Mounting Type M = Screw Mount Metal Shell

No. of Contacts 9, 15, 21, 25, 31, 37, 51, 100

Contact Type P = Pin Plug S = Socket Receptacle

Wire Size in AWG 4 = 24, 5 = 25, 6 = 26, 8 = 28, 0 = 30 or S = Solder Cup Stranded wire available in even number sizes only.

Wire Type C = Solid Copper uninsulated E = MIL-W-16878/4, 7 Strand NEMA HP3 F = MIL-W-16878/6, 7 Strand NEMA HP3 G = MIL-W-16878/4, 19 Strand NEMA HP3 H = MIL-W-16878/6, 19 Strand NEMA HP3 K = Insulated Wire per SAE-AS 22759/11 L = Insulated Wire per SAE-AS 22759/19

Insulation, Colour or Wire Finish 1 = White 2 = Yellow 3 = Tin Plated 4 = Gold Plated 5 = Colour Coded per MIL-Std. 681, System

Shell Plating No Letter = Std. Yellow Chromate over Cadmium N = Electroless Nickel G = Gold S = Stainless Steel D = Olive Drab

MIL-C-83513/5-07 Size 100 MIL-C-83513/5-17 C = Jackpost Short Style M= Jackscrew, Hex. Hd., Low Sizes 9 thru 51 MIL-C-83513/5-02 Size 100 MIL-C-83513/5-12 S = Jackscrew, Slot Hd., Low Sizes 9 thru 51 MIL-C-83513/5-05 Size 100 MIL-C-83513/5-15 H = Jackscrew, Hex. Hd., High Sizes 9 thru 51 MIL-C-83513/5-03 Size 100 MIL-C-83513/5-13 J = Jackscrew, Slot Hd., High Sizes 9 thru 51 MIL-C-83513/5-06 Size 100 MIL-C-83513/5-16

Lead Length in Inches*** Solid copper wire only Solid copper wire only Solid copper wire only Stranded wire only Stranded wire only Stranded wire only Stranded wire only
** See p. 13 for standard hardware dimensions. See p. 14 for non-standard hardware and p. 31 for MIL hardware, both sold separately. *** Length Tolerance solid wire = ± 3/32", standard wire = ±

DURA-CON HIGH RELIABILITY M E TA L S H E L
1.27mm Density Solder Cup/Wire D-Microminiature

DURA-CON HIGH RELIABILITY M E TA L S H E L
1.27mm Density Solder Cup/Wire D-Microminiature

DURA-CON HIGH RELIABILITY M O U N T I N G H A R D WA R E
1.27mm Density Solder Cup/Wire D-Microminiature

ALLOWABLE DIAMETRAL FLOAT MAX. ALLOWABLE AXIAL FLOAT Engaging Face
185 MAX. REF.

Float Mounting

Option “F”

Engaging Face
#2-56 UNC-2A OR #4-40 UNC-2A 100 SIZE

AXIAL FLOAT MAX.

Connector Shown For Reference Only

MAX.
100 SIZE

Engaging Face

Connector Shown For Reference Only

REF.

MAX.

MAX.

ALLOWABLE AXIAL FLOAT

ALLOWABLE DIAMETRAL FLOAT

Engaging Face
Ordering Information

DMEB 1- 128 P 6 E 2 180 XXX

Series DMEB = Microedgeboard, DNEB = Microedgeboard,

Narrow 184 Only

Contact Spacing *1 = 1.27mm centres 128/184 *2 = 2.54mm centres 64/92 every other contact hole

Layouts 128, 184

Contact Type P = Pin S = Socket

Wire Size in AWG 4 = 24, 5 = 25, 6 = 26, 8 = 28, 0 = 30 or S = Solder Cup Stranded wire available in even number sizes only.
*For other contact spacing accommodations consult the factory Consult factory for stranded wire lead codes.

Code Consult factory

Lead Length in Inches xx.x

Insulation, Colour or Wire Finish 1 = White 2 = Yellow 3 = Tin Plated 4 = Gold Plated 5 = Colour Coded per MIL-Std. 681, System

Wire Type C = Solid Copper uninsulated E = MIL-W-16878/4, 7 Strand NEMA HP3 F = MIL-W-16878/6, 7 Strand NEMA HP3 G = MIL-W-16878/4, 19 Strand NEMA HP3 H = MIL-W-16878/6, 19 Strand NEMA HP3 K = Insulated Wire per SAE-A5 22759/11 BS = PC Board Coke Bottle BRA = PC Board Right Angle Formed to ‘A’ Side BRB = PC Board Right Angle Formed to ‘B’ Side W = PC Board Claw Foot

DURA-CON HIGH RELIABILITY STRIP CONNECTORS
1.27mm Density Solder Cup/Wire All-Plastic

DURA-CON HIGH RELIABILITY STRIP CONNECTORS
1.27mm Density Solder Cup/Wire All Plastic
1 2 3 4 5
SEE ORDERING INFORMATION

DURA-CON HIGH RELIABILITY BACK SHELLS-MMBS

LIP FOR HEAT SHRINK BOOT
SEE ORDERING INFORMATION

SINGLE LAYER TINNED COPPER

BRAID

RR TToopp EEnnttrryy 9900ºº

B MAX. C MAX.

LIP FOR HEAT SHRINK BOOT
SEE ORDERING INFORMATION

SINGLE LAYER TINNED COPPER

BRAID

SS ToSpidEenEtrnytr9y0º

B MAX.

SINGLE LAYER TINNED COPPER

BRAID

INSFEOEROMRADTIEORNING

LIP FOR HEAT SHRINK BOOT

B MAX.

SINGLE LAYER TINNED COPPER

BRAID

B MAX.

LIP FOR HEAT SHRINK BOOT

TT Top Entry

D MAX.

FF 4455ºº EEnnttrryy

A MAX.

DURA-CON HIGH RELIABILITY J A C K M AT E
1.27mm Density Solder Cup/Wire J-Microminiature

DURA-CON HIGH RELIABILITY J A C K M AT E
1.27mm Density Solder Cup/Wire J-Microminiature
26 Positions socket
26 Positions pin 41

DURA-CON HIGH RELIABILITY J A C K M AT E
1.27mm Density Solder Cup/Wire J-Microminiature
10 Positions socket 10 Positions pin

NOTES

At Cinch our philosophy is that anything is possible.

With over 70 years’ experience as a global supplier we offer simple, effective solutions to our customers’ interconnect and integration needs. From basic interconnect to complex integration requiring bespoke design, we focus primarily on quality, ingenuity and reliability, meeting the high performance demands of industries such as Defence, Aerospace, Space, Telecom, High Speed Data Servers and Industrial Transportation.

TOGETHER WE STIMULATE, WE INNOVATE, WE CREATE.

CINCH CONNECTORS 1700 Finlay Road Lombard IL 60148 USA

Tel:

Fax Email:

Cinch Connectors Ltd. Shireoaks Road Worksop Nottinghamshire S80 3HA

Tel +44 0 1909 474131 Fax +44 0 1909 478321 Email:

Cinch has manufacturing and sales sites located globally approved to AS9100.
More datasheets: ATA5746-EK | ATA5745-PXQW 19 | ATA5746-PXQW 19 | ATA5745-PXPW 19 | ATA5746-PXPW 19 | ATA5745-EK | KSU213 ST LFG | EVAL-ADF4360-8EBZ1 | 88256513 | DCDM-51P6E5-18.0S


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DCDM-21S6E5-18.0S Datasheet file may be downloaded here without warranties.

Datasheet ID: DCDM-21S6E5-18.0S 523084