ES3277

ES3277 Datasheet

ES3277

Part	Datasheet
ES3277	ES3277 (pdf)

Related Parts	Information
ES177	ES177

PDF Datasheet Preview
CHEMTRONICS Technical Data Sheet TDS # 3277 Eco-Rite Multi-Purpose Cleaner The eco-friendly, multi-purpose aqueous cleaner PRODUCT DESCRIPTION Environmentally preferable Eco-Rite Multi-Purpose Cleaner is a low environmental impact multi-purpose cleaner, specifically formulated for a variety of cleaning applications. This formulation is non-flammable and biodegradable, offering safe and efficient cleaning of a variety of surfaces. Available in a convenient, ready-to use trigger spray or a concentrate ready for dilution, Eco-Rite Multi-Purpose Cleaner is ideal for cleaning hard surfaces such as bench tops, counters, tool boxes, compressors, floors, hoists, lifts, engines, etc. The waterbased cleaning solution quickly penetrates, emulsifies and lifts the toughest grime, without the environmental impact of high VOC’s, caustic compounds, and butylbased cleaners. • Multi-purpose spray and wipe cleaning performance • Removes oils, dirt, waxes and handling soils • Non-flammable • Biodegradable • No Phosphates, EDTA, or NTA • Non-caustics, non-acidic, no chlorine bleach, no abrasives • No Carcinogens, Ozone Depleting Compounds • No Petroleum Distillates • No Alkylphenolethoxylates • Butyl-free Eco-Rite Multi-Purpose Cleaner can be used for all repair, maintenance, and manufacturing cleaning applications including • Removes oils, handling soils and lubricants • Ideal for metal parts cleaning and tools • All repair and maintenance cleaning • Used to clean grease and other soils from a variety of surfaces such as • Stainless Steel, Chrome • Plastics • Ceramics and enamel TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Boiling Point Evaporation Rate butyl acetate=1 Flash Point TCC Specific Gravity Appearance 212° F Initial <1 None / RTU / concentrate Clear, colorless liquid Odor Mild, Clean Solubility in Water 100% Shelflife 2 years CARB & OTC VOC Content SCAQMD 87 g/L trigger sprayer RTU VOC Content *Volatile Organic Compound VOC information is calculated on a weight basis using the VOC definition of California Air Resources Board CARB Consumer Product Regulations, South Coast Air Quality Management District SCAQMD Rule 102 and the Federal definition published in 40 CFR 51.100 s . COMPATIBILITY Eco-Rite Multi-Purpose Cleaner is compatible with most metals and plastics. As with any solvent, compatibility with substrate should be determined on a non-critical area prior to use. Material ABS Buna-N Butyl EPDM Graphite HDPE PVDF LDPE Neoprene 66 Polycarbonate Polypropylene Polystyrene PVC Silicone Rubber Compatibility Excellent Excellent Excellent USAGE INSTRUCTIONS Read MSDS carefully prior to use. Spray Eco-Rite Multi-Purpose Cleaner on the surface to be cleaned. Wipe away soils with a Controlwipes Wipe, or rinse with clean water. Can be used in hot or cold immersion, ultrasonic or aqueous cleaning systems. For immersion systems, soak as necessary. Parts can also be cleaned with a pressure sprayer by spraying parts from top to bottom, allowing the liquid to flush away dirt and dissolved grease. Dilution ratios for concentrate Heavy grease, oxidized oils and grime Fiberglass, Plastics General cleaning Dip tanks Parts washers Ultrasonic cleaners Pressure cleaning systems Water Conc 2:1 4:1 8:1 8:1 16:1 16:1 60:1

PDF Datasheet Preview

CHEMTRONICS

Technical Data Sheet

TDS # 3277

Eco-Rite Multi-Purpose Cleaner

The eco-friendly, multi-purpose aqueous cleaner

PRODUCT DESCRIPTION

Environmentally preferable Eco-Rite Multi-Purpose Cleaner is a low environmental impact multi-purpose cleaner, specifically formulated for a variety of cleaning applications. This formulation is non-flammable and biodegradable, offering safe and efficient cleaning of a variety of surfaces. Available in a convenient, ready-to use trigger spray or a concentrate ready for dilution, Eco-Rite Multi-Purpose Cleaner is ideal for cleaning hard surfaces such as bench tops, counters, tool boxes, compressors, floors, hoists, lifts, engines, etc. The waterbased cleaning solution quickly penetrates, emulsifies and lifts the toughest grime, without the environmental impact of high VOC’s, caustic compounds, and butylbased cleaners.
• Multi-purpose spray and wipe cleaning performance
• Removes oils, dirt, waxes and handling soils
• Non-flammable
• Biodegradable
• No Phosphates, EDTA, or NTA
• Non-caustics, non-acidic, no chlorine bleach, no
abrasives
• No Carcinogens, Ozone Depleting Compounds
• No Petroleum Distillates
• No Alkylphenolethoxylates
• Butyl-free

Eco-Rite Multi-Purpose Cleaner can be used for all repair, maintenance, and manufacturing cleaning applications including
• Removes oils, handling soils and lubricants
• Ideal for metal parts cleaning and tools
• All repair and maintenance cleaning
• Used to clean grease and other soils from a variety
of surfaces such as
• Stainless Steel, Chrome
• Plastics
• Ceramics and enamel

TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES

Boiling Point Evaporation Rate butyl acetate=1 Flash Point TCC Specific Gravity

Appearance
212° F Initial
<1 None / RTU / concentrate Clear, colorless liquid

Odor

Mild, Clean

Solubility in Water
100%

Shelflife
2 years

CARB & OTC VOC Content

SCAQMD
87 g/L trigger sprayer RTU

VOC Content
*Volatile Organic Compound VOC information is calculated on a weight basis using the VOC definition of California Air Resources Board CARB Consumer Product Regulations, South Coast Air Quality Management District SCAQMD Rule 102 and the Federal definition published in 40 CFR 51.100 s .

COMPATIBILITY Eco-Rite Multi-Purpose Cleaner is compatible with most metals and plastics. As with any solvent, compatibility with substrate should be determined on a non-critical area prior to use.

Material

ABS Buna-N Butyl EPDM Graphite HDPE PVDF LDPE

Neoprene 66 Polycarbonate Polypropylene Polystyrene PVC Silicone Rubber

Compatibility

Excellent

Excellent

Excellent

USAGE INSTRUCTIONS

Read MSDS carefully prior to use. Spray Eco-Rite Multi-Purpose Cleaner on the surface to be cleaned. Wipe away soils with a Controlwipes

Wipe, or rinse with clean water.

Can be used in hot or cold immersion, ultrasonic or aqueous cleaning systems. For immersion systems, soak as necessary. Parts can also be cleaned with a pressure sprayer by spraying parts from top to bottom, allowing the liquid to flush away dirt and dissolved grease.

Dilution ratios for concentrate Heavy grease, oxidized oils and grime Fiberglass, Plastics General cleaning Dip tanks Parts washers Ultrasonic cleaners Pressure cleaning systems

Water Conc 2:1 4:1 8:1 8:1 16:1 16:1 60:1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ES3277 Datasheet file may be downloaded here without warranties.

Datasheet ID: ES3277 644100