ES1051

ES1051 Datasheet

ES1051 10 oz. Aerosol ES1551 15 oz. Aerosol

Part	Datasheet
ES1051	ES1051 (pdf)

Related Parts	Information
ES1551	ES1551

PDF Datasheet Preview
CHEMTRONICS Technical Data Sheet TDS # 1051 Freez-It Antistat PRODUCT DESCRIPTION Freez-It Antistat is engineered for locating thermal intermittent electrical components or cooling printed circuit boards with minimal static generation. This circuit refrigerant system is nonflammable, residue-free and provides fast cooling action. • Minimal static generation • Nonflammable • High heat transfer • Low static generation • Noncorrosive • Lowers temperature to -60F 51C • Ultra pure, filtered to microns • Leaves no residue • Nonabrasive on most surfaces • Dries fast • Contains no CFCs or HCFCs TYPICAL APPLICATIONS Freez-It Antistat can be used to: • Cool Equipment for Testing • Dissipate Heat While Soldering or Desoldering • Isolate Thermal Intermittent Components • Test Circuit Traces for Continuity • Test Printed Circuit Boards for Stress Fractures • Track Static Sensitive Components TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Boiling Point Vapor Density air=1 77F Solubility in Water 77F /1 atm Specific Gravity water = 1 -15.7F by weight Evaporation Rate butyl acetate=1 Appearance Odor Surface Tension dynes/cm 77F Shelflife Clear, Colorless Liquified Gas Slight Ethereal 10 years Flash Point TCC None COMPATIBILITY Freez-It Antistat is generally compatible with most materials used in printed circuit board fabrication, including sensitive plastics and compounds. With any circuit refrigerant, compatibility must be determined on a non-critical area prior to use. Material Buna-N Graphite HDPE LDPE Neoprene Cross-Linked PE Polyacrylate Polystyrene PVC Silicone Rubber Compatibility Fair Good Poor Good Poor Good Fair Good Poor Competitive Assessment of Freez-It Antistat Freez-It Antistat 56% Less Static 40 v/in. Competitor’s Antistat Freeze Spray 90 v/in. 20 40 100 120 Static Generation V/IN. USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. No special surface preparation is required prior to using Freez-ItAntistat. Direct spray onto the area to instantly cool components, circuit boards or adhesives. For optimum performance and pin point control, use Freez-ItAntistat with the attached extension tube. TECHNICAL & APPLICATION ASSISTANCE Chemtronics provides a technical hotline to answer your technical and application related questions. The toll free number is 1-800-TECH-401. ENVIRONMENTAL IMPACT DATA ENVIRONMENTAL IMPACT DATA CFC HCFC CL Solv. VOC HFC ODP

PDF Datasheet Preview

CHEMTRONICS

Technical Data Sheet

TDS # 1051

Freez-It Antistat

PRODUCT DESCRIPTION Freez-It Antistat is engineered for locating thermal intermittent electrical components or cooling printed circuit boards with minimal static generation. This circuit refrigerant system is nonflammable, residue-free and provides fast cooling action.
• Minimal static generation
• Nonflammable
• High heat transfer
• Low static generation
• Noncorrosive
• Lowers temperature to -60F 51C
• Ultra pure, filtered to microns
• Leaves no residue
• Nonabrasive on most surfaces
• Dries fast
• Contains no CFCs or HCFCs

TYPICAL APPLICATIONS Freez-It Antistat can be used to:
• Cool Equipment for Testing
• Dissipate Heat While Soldering or

Desoldering
• Isolate Thermal Intermittent

Components
• Test Circuit Traces for Continuity
• Test Printed Circuit Boards for Stress

Fractures
• Track Static Sensitive Components

TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES

Boiling Point

Vapor Density air=1 77F Solubility in Water 77F /1 atm Specific Gravity water = 1
-15.7F
by weight

Evaporation Rate butyl acetate=1 Appearance

Odor Surface Tension dynes/cm 77F Shelflife

Clear, Colorless Liquified Gas Slight Ethereal
10 years

Flash Point TCC

None

COMPATIBILITY Freez-It Antistat is generally compatible with most materials used in printed circuit board fabrication, including sensitive plastics and compounds. With any circuit refrigerant, compatibility must be determined on a non-critical area prior to use.

Material Buna-N Graphite HDPE LDPE Neoprene Cross-Linked PE Polyacrylate Polystyrene PVC Silicone Rubber

Compatibility Fair Good Poor

Good Poor Good Fair Good

Poor

Competitive Assessment of Freez-It Antistat

Freez-It Antistat 56% Less Static
40 v/in.

Competitor’s Antistat Freeze Spray
90 v/in.
20 40
100 120

Static Generation V/IN.

USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. No special surface preparation is required prior to using Freez-ItAntistat. Direct spray onto the area to instantly cool components, circuit boards or adhesives. For optimum performance and pin point control, use Freez-ItAntistat with the attached extension tube.

TECHNICAL & APPLICATION ASSISTANCE

Chemtronics provides a technical hotline to answer your technical and application related questions. The toll free number is 1-800-TECH-401.

ENVIRONMENTAL IMPACT DATA

ENVIRONMENTAL IMPACT DATA

CFC HCFC CL Solv.

VOC HFC ODP

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ES1051 Datasheet file may be downloaded here without warranties.

Datasheet ID: ES1051 644097