CW9200

CW9200 Datasheet

TDS # CW9000

Part	Datasheet
CW9200	CW9200 (pdf)

Related Parts	Information
CW9100	CW9100

PDF Datasheet Preview
Technical Data Sheet TDS # CW9000 Flux Remover Pens PRODUCT DESCRIPTION Flux Remover Pens are designed specifically to remove each type of flux. The Rosin Flux Remover Pen quickly cleans type R, RMA, and RA flux residues. The No Clean Flux Remover Pen precisely removes both organic and synthetic low solid no clean fluxes. A pen for removing rosin flux residues A pen for spot removal of no clean fluxes Penetrates hard to reach areas Marker pen dispenser provides controlled and exact application Removes ionic and non-ionic residues Excellent material compatibility Fast drying TYPICAL APPLICATIONS Flux Remover Pens remove flux residues and clean precise areas on: Printed Circuit Boards Chip Carriers Heat Sinks Surface Mount Device Pads Switches Sockets TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Rosin Flux Remover Pen Flash Point TCC 70 °F 21 °C Vapor Density air=1 Surface Tension dyne/cm Appearance Clear Liquid Odor Alcohol No Clean Flux Remover Pen Flash Point TCC 102 °F 39 °C Vapor Density air=1 Surface Tension dyne/cm Appearance Clear Liquid Odor Characteristic Water Soluble Flux Remover Pen Flash Point TCC Vapor Density air=1 Surface Tension Appearance Odor Shelflife RoHS/WEEE Status 70 °F 21 °C >1 dyne/cm Clear Liquid Alcohol 5 years COMPATIBILITY Flux Remover Pens are generally compatible with most materials used in the electronics industry. As with any cleaning agent, material compatibility should be determined on a non-critical area prior to use. USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. Hold pen vertically and briefly depress tip to start liquid flow. Rub pen tip on surface to be cleaned. Wipe tip on a ControlWipe dry wipe to remove buildup. CAUTION Product is Flammable - Do not use near sources of ignition and energized equipment. NOTE This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. AVAILABILITY CW9100 9 gm oz No Clean Flux Remover Pen CW9200 8 gm oz Rosin Flux Remover Pen ITW CHEMTRONICS

PDF Datasheet Preview

Technical Data Sheet

TDS # CW9000

Flux Remover Pens

PRODUCT DESCRIPTION Flux Remover Pens are designed specifically to remove each type of flux. The Rosin Flux Remover Pen quickly cleans type R, RMA, and RA flux residues. The No Clean Flux Remover Pen precisely removes both organic and synthetic low solid no clean fluxes.

A pen for removing rosin flux residues A pen for spot removal of no clean fluxes Penetrates hard to reach areas Marker pen dispenser provides controlled and exact application Removes ionic and non-ionic residues Excellent material compatibility Fast drying

TYPICAL APPLICATIONS Flux Remover Pens remove flux residues and clean precise areas on:

Printed Circuit Boards Chip Carriers Heat Sinks Surface Mount Device Pads Switches Sockets

TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES

Rosin Flux Remover Pen

Flash Point TCC
70 °F 21 °C

Vapor Density air=1

Surface Tension
dyne/cm

Appearance

Clear Liquid

Odor

Alcohol

No Clean Flux Remover Pen

Flash Point TCC
102 °F 39 °C

Vapor Density air=1

Surface Tension
dyne/cm

Appearance

Clear Liquid

Odor

Characteristic

Water Soluble Flux Remover Pen

Flash Point TCC Vapor Density air=1 Surface Tension Appearance Odor Shelflife RoHS/WEEE Status
70 °F 21 °C >1
dyne/cm Clear Liquid

Alcohol 5 years

COMPATIBILITY Flux Remover Pens are generally compatible with most materials used in the electronics industry. As with any cleaning agent, material compatibility should be determined on a non-critical area prior to use.

USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. Hold pen vertically and briefly depress tip to start liquid flow. Rub pen tip on surface to be cleaned. Wipe tip on a ControlWipe dry wipe to remove buildup.

CAUTION Product is Flammable - Do not use near sources of ignition and energized equipment.

NOTE This information is believed to be accurate. It is
intended for professional end users having the skills to evaluate and use the data properly. does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it.

AVAILABILITY

CW9100 9 gm oz No Clean Flux Remover Pen CW9200 8 gm oz Rosin Flux Remover Pen

ITW CHEMTRONICS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CW9200 Datasheet file may be downloaded here without warranties.

Datasheet ID: CW9200 644096