DK800P

DK800P Datasheet


Part Datasheet
DK800P DK800P DK800P (pdf)
Related Parts Information
DK796P DK796P DK796P
DK798P DK798P DK798P
DK797P DK797P DK797P
DK799P DK799P DK799P
PDF Datasheet Preview
DK790V Series

Voltage Powered LCD Digital Panel Meters Adjustable Voltage Digit

EPIC SERIES

Features:

Low-cost, high-performance replacement for many OEM DPMs Optional RED, GREEN or AMBER backlighting Snap-in bezel mount eliminates mounting hardware Resistant to RF and EMI

Specifications:

Display:

Digits:

Type:

Backlighting:

Polarity:

Annuciators:

Decimal Points:

Overrange:

Inputs:

Ranges:

Configuration:

Impedance:

Performance Accuracy:

Conversion Rate:

Normal Mode Rejection:

Adjustments:

Warmup:

Temperature Coefficient:

Offset Range:

Gain Range:

Environment Operating Range:

Storage Range:

Power Supply:

Optional Backlight:

Mounting:

Connection:
4 digits ±19999 counts mm 7 segment LCD Optional Red Negative red numbers/black background Optional Green Negative green numbers/black background Optional Amber Negative amber numbers/black background Optional Green Postive black numbers/green background automatic, “-” displayed °F, °C, PSI, %, user selectable, V, A KW, PF 4 position, user selectable four lower order digits blank for inputs >19999 & <-19999 0-10 VDC, 0-5 VDC or 0-200 mV DC single ended min. fs + 2 count 3 per second >30 dB 60 Hz span gain 2 10V and 5V and zero offset 10 minutes typical ±100 ppm per °C typical -19999 to +19999 1-20000 counts above adjusted zero 0 to 50 °C -10 to 60 °C 12 VDC or 24 VDC regulated selectable 24 VDC at 35 mA typical snap-in bezel mount 4 screw terminal 6 with backlight
digits with high-contrast LCD 12V or 24V DC Voltage powered User selectable, displayed engineering units
Ordering Information:

BACKLIGHT COLOR

BACKLIGHT POWER

NEG VDC NEG VDC NEG VDC NO NONE POS 24VDC
*Add P for Power Engineering Units V, A, KW, PF

Regulated 120V AC to 12V DC Power Supply Regulated 120V AC to 24V DC Power Supply AC to adjustable DC output AC to adjustable DC output CVC.

C-TON Industries
• PO Box 172
• Sunapee, NH, 03782
• USA
• Phone 603 456-2655
• email:

Voltage Powered LCD Digital Panel Meters

Adjustable Voltage Digit

Dimensions

DK790V Series

EPIC SERIES

Wiring

Decimal Point Selection Locate jumpers J4 through J6 in the middle of the
circuit board unit. Jumper the appropriate decimal location as follows:

J4 - J5 - J6 - None - 0000

C-TON Industries
• PO Box 172
• Sunapee, NH, 03782
• USA
• Phone 603 456-2655
• email:
More datasheets: MR210C2NBB | MR210C5NBB | CY25811ZXC | CY25811ZXCT | AD7111ACR-REEL | AT43USB320A-AC | DK796P | DK798P | DK797P | DK799P


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DK800P Datasheet file may be downloaded here without warranties.

Datasheet ID: DK800P 522416