DK790P

DK790P Datasheet


DK790 Series

Part Datasheet
DK790P DK790P DK790P (pdf)
Related Parts Information
DK795P DK795P DK795P
DK791P DK791P DK791P
DK794P DK794P DK794P
DK793P DK793P DK793P
PDF Datasheet Preview
DK790 Series

Loop Powered LCD Digital Panel Meters Digit LCD with Loop Power Board

EPIC SERIES

Features:

Low-cost, high-performance replacement for many OEM DPMs Optional RED, GREEN or AMBER backlighting Snap-in bezel mount eliminates mounting hardware Resistant to RF and EMI

Specifications:

Display:

Digits:

Type:

Backlighting:

Polarity:

Annuciators:

Decimal Points:

Overrange:

Inputs:

Ranges:

Configuration:

Impedance:

Performance Accuracy:

Conversion Rate:

Normal Mode Rejection:

Adjustments:

Warmup:

Temperature Coefficient:

Environment Operating Range:

Storage Range:

Power Supply:

Optional Backlight:

Mounting:

Connection:
4 digits ±19999 counts mm 7 segment LCD Optional Red Negative red numbers/black background Optional Green Negative green numbers/black background Optional Amber Negative amber numbers/black background Optional Green Positive black numbers/green background automatic, “-” displayed °F, °C, PSI, %, or V, A, KW, PF 4 position, user selectable four lower order digits blank for inputs >19999 & < -19999 4-20 mA  DC bipolar differential nominal 20 mA fs + 2 count 3 per second >30 dB 60 Hz span gain and zero offset with course setting 10 minutes typical ± 100 ppm per °C typical 0 to 50 °C -20 to 70 °C powered by the milliamp control loop 24 VDC at 35 mA typical snap-in bezel mount 2 screw terminal 4 with backlight
digits with high-contrast LCD 4- 20 mA loop powered input User selectable, displayed engineering units
Ordering Information:

BACKLIGHT COLOR

BACKLIGHT POWER

NO NEG POS
*Add P for Power Engineering Units V, A, KW, PF
120V AC to 24V DC Power Supply 24V AC to adjustable DC output 24V AC to adjustable DC output Calibrator

C-TON Industries
• PO Box 172
• Sunapee, NH, 03782
• USA
• Phone 603 456-2655
• email:

Loop Powered LCD Digital Panel Meters

Digit LCD with Loop Power Board

Dimensions

DK790 Series

EPIC SERIES

Jumper Selection & Wiring

DECIMAL SELECTION J7 J6 J5 J4
19999

J1, J2, J3 SELECTION IF MIN DISPLAY IS = 0 or MIN DISPLAY IS > 0 and MAX DISPLAY ÷ MIN DISPLAY 5

IF MIN DISPLAY IS > 0 and MAX DISPLAY ÷ MIN DISPLAY < 5

J3 J2 J1 J3 J2 J1

SPAN JUMPER SECTION:

SPAN FACTOR

SET JUMPERS
0-12
10-22
22-32

IF MIN DISPLAY IS 0 or

MIN DISPLAY IS > 0 and MAX DISPLAY ÷ MIN DISPLAY > 5

THEN SPAN FACTOR =

MAX DISPLAY - MIN DISPLAY
4000 + MIN DISPLAY - MAX DISPLAY

IF MIN DISPLAY IS > 0 and MAX DISPLAY ÷ MIN DISPLAY 5

THEN SPAN FACTOR =

MAX DISPLAY - MIN DISPLAY
1600

ZERO OFFSET JUMPER SELECTION ZERO FACTOR SET JUMPERS
0-3994
3320-7314
6640-10634

IF MIN DISPLAY IS 0 or

MIN DISPLAY IS > 0 and MAX DISPLAY ÷ MIN DISPLAY > 5

THEN ZERO FACTOR = 250000 + MIN DISPLAY X 83834 - 73200
250000 + 400 SPAN FACTOR
More datasheets: CR4340-20 | AD8694WAC-P7 | AD8694WAC-P3 | FWA020009B-10A | 5642200101 | 2563 | ALS-PT243-3C/L177 | 17-10022 | FSDM101 | AWP2-16-7241-T-R


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DK790P Datasheet file may be downloaded here without warranties.

Datasheet ID: DK790P 522415