M837319231

M837319231 Datasheet


M83731/9-211 M83731/9-231 M83731/9-261 M83731/9-271 M83731/9-311 M83731/9-341

Part Datasheet
M837319231 M837319231 M837319231 (pdf)
Related Parts Information
M83731/10-351 M83731/10-351 M83731/10-351
M83731/10-312 M83731/10-312 M83731/10-312
M83731/10-321 M83731/10-321 M83731/10-321
M83731/15-231 M83731/15-231 M83731/15-231
M83731/15-261 M83731/15-261 M83731/15-261
M83731/15-271 M83731/15-271 M83731/15-271
M837319211 M837319211 M837319211
M83731/16-311 M83731/16-311 M83731/16-311
M83731/9-272 M83731/9-272 M83731/9-272
M8373110232 M8373110232 M8373110232
PDF Datasheet Preview
Features/Benefits
• Qualified to MIL-S-83731
• 50 µ inch selective gold contact plating
• Epoxy sealed terminals for process compatibility

Military/Aerospace/HI-REL MIL-S-83731 Toggle Switches
• Rated for logic level to 5 amp resistive loads and 2 amp inductive loads
• Flame retardant housing material
• RoHS compliant and compatible

Test Requirement

Strength of Terminal Strength of Actuating Lever Pivot and Stop Strength of Mounting Means Dielectric Sea Level Indication Contact Voltage Drop Temperature Rise Short Circuit Mechanical Life Electrical Endurance Overload Electrical Endurance at Sea Level

Vibration

Shock Salt Spray

Test Upon Completion Moisture Resistance

Test Upon Completion Sand & Dust

Explosion Sealing A. Toggle Seal

B. Bushing Seal Temperature Operation Life Low Cur. Level Fungus Intermediate Current Thermal Shock

MIL-S-83731/9, 10, 13, 14, 15, 16
1 lb. solder lug 10 lbs. & 8 lbs. throughout range 15 lbs. in. torque on bushing 1000 VAC Group B, 750 VAC after electrical endurance. 500 µA max. leakage millivolt initial, millivolt after mechanical endurance 2-6 VDC amp

C rise max. rated resistive load after endurance test
10 operations carry 100 amps resistive load lowest DC volts 20K operations at specified high and low temperatures 10K operations at specified high and low temperatures 50 operations 150% of rated resistive load 10K operations resistive load room temperature 10K operations inductive load room temperature 10K operations lamp load room temperature Performed on different test samples

Method 204 of MIL-STD-202, test condition A D. A. or 10 G’s 10-500 Hz, 10 usec. max. chatter

Fuse-method 213 or MIL-STD-202, 10 usec. max. chatter 48 hours method 101 of MIL-STD-202, test condition B 10 operations resistive load toggle sealed switches only

Method 106 of MIL-STD-202 100 VDC potential between current carrying parts and panel

Method 110 of MIL-STD-202, test condition B 6 hours 23 C 2.5K operations mechanical life toggle sealed switches only

MIL-STD-202 method 109, maximum rated DC inductive load toggle sealed switches only Toggle seal 5 operations under inches of H2O above top of bushing Toggle sealed switches only Panel sealed switches only

Mechanical life, C to +71 C No requirement No requirement 20K operations, 35/40 milliamps 5 VDC resistive load +71 C Method 107 of MIL-STD-202 test condition A 5 cycles C/+85 C

RATINGS CURRENT RATINGS HIGH LEVEL

Current Capacity in Amperes Per Pole
28V dc 1 5 2
115V ac, 400 Hz

Lamp Load 1

Resistive Load 5

Inductive Load 2
125V ac, 60 Hz

CURRENT RATINGS LOGIC LEVEL Volt Amp VA Max. 28 V Max. AC or DC

MATERIALS

CASE Diallyl phthalate DAP UL 94 V-0 .

BUSHING Brass, nickel plated.

HOUSING Stainless steel.

ACTUATOR Brass, chrome plated.

SWITCH SUPPORT Brass, tin plated.

TERMINALS Gold over nickel over copper alloy.

TERMINAL SEAL Epoxy.

CONTACTS Gold over nickel over silver over brass.

PANEL SEAL Silicone rubber.
More datasheets: HLMP-LB63-QSCZZ | HLMP-LM63-XZCZZ | HLMP-LM63-X20ZZ | M83731/10-351 | M83731/10-312 | M83731/10-321 | M83731/15-231 | M83731/15-261 | M83731/15-271 | M837319211


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived M837319231 Datasheet file may be downloaded here without warranties.

Datasheet ID: M837319231 522564