GP11MSA1KE

GP11MSA1KE Datasheet

GP11MCKE OFF MOM.

Part	Datasheet
GP11MSA1KE	GP11MSA1KE (pdf)

Related Parts	Information
GP11MSAKE	GP11MSAKE
GP12MSAKE	GP12MSAKE
GP12MCKE	GP12MCKE
GP11MSV1KE(T&R)	GP11MSV1KE(T&R)
GP12MAKE	GP12MAKE
GP11MAKE	GP11MAKE
GP12MSV1KE	GP12MSV1KE
GP12MSCKE	GP12MSCKE
GP11MCKE	GP11MCKE

PDF Datasheet Preview
C&K GP Series Sealed Ultraminiature Pushbutton Switches Features/Benefits • Ultraminiature design saves space • Telecommunications and • Process compatible, withstands most network equipment soldering and washing processes • Computers and peripheral products • Thru-hole and surface mount models • Instrumentation available • Sealed o-ring and epoxy base Pushbutton Specifications Materials CONTACT RATING VA max. 20 V AC or DC max. MECHANICAL & ELECTRICAL LIFE 40,000 make-and-break cycles at full load. CONTACT RESISTANCE Below 50 typ. initial 2-4 V DC, 100 mA. INSULATION RESISTANCE min. DIELECTRIC STRENGTH 500 Vrms min. sea level. OPERATING TEMPERATURE to 85ºC. SOLDERABILITY Per MIL-STD-202F method 208D, or EIA RS-186E method 9 1 hour steam aging . DEGREE OF PROTECTION IP57 Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. PACKAGING Surface mount switches standard in anti-static tape and reel packaging per EIA 481-3, see page A-74 for drawings and reel information. HOUSING & BASE Glass filled nylon 4/6, flame retardant, heat stabilized UL 94V-0 . ACTUATOR Glass filled nylon 4/6, flame retardant UL 94V-0 with standard internal o-ring seal. SWITCH SUPPORT Brass, tin plated. MOVABLE CONTACT Copper alloy, with gold plate over nickel plate. STATIONARY CONTACTS Thru-hole models Copper alloy, with gold plate over nickel plate. TERMINALS Copper alloy, with tin-lead alloy over nickel plate. TERMINAL SEAL Epoxy/Urethane. All terminals insert molded. NOTE Materials listed above are general specifications. Specifications available for specific and custom switches, consult Customer Service Center. CAUTION PC mounting layouts and pads as shown are designed to be compatible with the latest equipment and reflow techniques. Care should be taken in the design and location of PC lands to suit individual needs. Orientation relative to reflow direction may significantly impact solder joint integrity. How To Order Complete part numbers for GP Series Sealed Ultraminiature Pushbutton Switches are shown on pages A-71 thru A-73. SWITCH FUNCTION POS.1 POS. 2 SCHEMATIC GP11MCKE OFF MOM. Conn. Terms. OPEN 1-3 SPST GP12MCKE MOM. Conn. Terms. MOM. = Momentary 2-3 SPDT

PDF Datasheet Preview

C&K GP Series Sealed Ultraminiature Pushbutton Switches

Features/Benefits
• Ultraminiature design saves space
• Telecommunications and
• Process compatible, withstands most network equipment
soldering and washing processes
• Computers and peripheral products
• Thru-hole and surface mount models
• Instrumentation
available
• Sealed o-ring and epoxy base

Pushbutton

Specifications

Materials

CONTACT RATING VA max. 20 V AC or DC max.

MECHANICAL & ELECTRICAL LIFE 40,000 make-and-break cycles at full load.

CONTACT RESISTANCE Below 50 typ. initial 2-4 V DC, 100 mA.

INSULATION RESISTANCE min. DIELECTRIC STRENGTH 500 Vrms min. sea level.

OPERATING TEMPERATURE to 85ºC.

SOLDERABILITY Per MIL-STD-202F method 208D, or EIA RS-186E method 9 1 hour steam aging .

DEGREE OF PROTECTION IP57 Protection against harmful dust deposit, full-scale voltage protection, temporary immersion.

PACKAGING Surface mount switches standard in anti-static tape and reel packaging per EIA 481-3, see page A-74 for drawings and reel information.

HOUSING & BASE Glass filled nylon 4/6, flame retardant, heat stabilized UL 94V-0 .

ACTUATOR Glass filled nylon 4/6, flame retardant UL 94V-0 with standard internal o-ring seal.

SWITCH SUPPORT Brass, tin plated.

MOVABLE CONTACT Copper alloy, with gold plate over nickel plate.

STATIONARY CONTACTS Thru-hole models Copper alloy, with gold plate over nickel plate.

TERMINALS Copper alloy, with tin-lead alloy over nickel plate.

TERMINAL SEAL Epoxy/Urethane. All terminals insert molded.

NOTE Materials listed above are general specifications. Specifications available for specific and custom switches, consult Customer Service Center.

CAUTION PC mounting layouts and pads as shown are designed to be compatible with the latest equipment and reflow techniques. Care should be taken in the design and location of PC lands to suit individual needs. Orientation relative to reflow direction may significantly impact solder joint integrity.

How To Order Complete part numbers for GP Series Sealed Ultraminiature Pushbutton Switches are shown on pages A-71 thru A-73.

SWITCH FUNCTION POS.1 POS. 2

SCHEMATIC

GP11MCKE OFF MOM.

Conn. Terms.

OPEN
1-3 SPST

GP12MCKE

MOM.

Conn. Terms.

MOM. = Momentary
2-3 SPDT

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived GP11MSA1KE Datasheet file may be downloaded here without warranties.

Datasheet ID: GP11MSA1KE 522499