EP11FPD1AKE

EP11FPD1AKE Datasheet

ELECTRICAL LIFE EP11, EP21 models 60,000 make-and-break cycles at full load. EP12 models 30,000 cycles.

Part	Datasheet
EP11FPD1AKE	EP11FPD1AKE (pdf)

Related Parts	Information
EP12FPD1SAKE	EP12FPD1SAKE
EP12FPD1AKE	EP12FPD1AKE
EP11SD1AKE	EP11SD1AKE
EP11SD1AVKE	EP11SD1AVKE
EP11FPD1SAKE	EP11FPD1SAKE
EP12SD1SAKE	EP12SD1SAKE
EP11SD1SAKE	EP11SD1SAKE
EP12SD1AKE	EP12SD1AKE

PDF Datasheet Preview
Pushbutton Features/Benefits • Sealed against solder & cleaning processes • Thru-hole and surface mount models • Snap-fitting actuator accepts standard caps • Tape & reel packaging available • RoHS compliant models available C&K EP Series Sealed Tiny Pushbutton Switches Typical Applications • Telecommunications and networking equipment • Computers and peripherals • Instrumentation and controls Models Available Specifications CONTACT RATING B contact material VA max. 20 V AC or DC max. See page A-11 for additional ratings. ELECTRICAL LIFE EP11, EP21 models 60,000 make-and-break cycles at full load. EP12 models 30,000 cycles. CONTACT RESISTANCE Below 20 typ. initial 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE 109 min. DIELECTRIC STRENGTH 1000 Vrms min. sea level. OPERATING TEMPERATURE to 85ºC. SOLDERABILITY Per MIL-STD-202F method 208D, or EIA RS-186E method 9 1 hour steam aging . DEGREE OF PROTECTION IP57 Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. PACKAGING Surface mount switches standard in anti-static tape and reel packaging per EIA 481-3, see page A-12 for drawings and reel information. Tape and cover strip are conductive for use near statically sensitive components, consult Customer Service Center. Materials CASE & BUSHING Glass filled nylon 6/6, flame retardant, heat stabilized UL 94V-0 . SA surface mount High temperature material, glass filled nylon 4/6, flame retardant, heat stabilized UL 94V-0 . PLUNGER Thermoplastic polyester or glass filled nylon UL 94V-0 , with internal o-ring seal. SA surface mount High temperature material, glass filled nylon 4/6, flame retardant, heat stabilized UL 94V-0 . SWITCH SUPPORT Brass, matte-tin plated. CONTACTS & TERMINALS B contact material Copper alloy, with gold plate over nickel plate. See page A-11 for additional contact materials. TERMINAL SEAL Epoxy. NOTE Any models supplied with Q, B, P, S, R or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: NOTE Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. CAUTION PC mounting layouts and pads as shown are designed to be compatible with the latest equipment and reflow techniques. Care should be taken in the design and location of PC lands to suit individual needs. Orientation relative to reflow direction may significantly impact solder joint integrity. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-8 thru A-11. For additional options not shown in catalog, consult Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function EP11 SPST Off-Mom. EP12 SPDT On-Mom. EP21 DPST Off-Mom. Plunger S high S1 high S2 high FP Flush R Snap-fitting, high Bushing D1 Unthreaded Seal E Epoxy Terminations A Right angle, PC thru-hole C PC Thru-hole AV Vertical right angle, PC thru-hole AV3 Vertical right angle, snap-in, PC thru-hole SA Right angle, surface mount SA1 Right angle, surface mount rear facing V3 Vertical mount, v-bracket V31 Vertical mount, v-bracket, snap-in EP11 & EP12 only W Wire wrap Contact Material B Gold K Gold, tin-lead P Gold, matte-tin Q Silver M Silver, tin-lead S Silver, matte-tin G Gold over silver L Gold over silver, tin-lead R Gold over silver, matte tin Dimensions are shown Inches mm Specifications and dimensions subject to change Pushbutton C&K EP Series Sealed Tiny Pushbutton Switches

PDF Datasheet Preview

Pushbutton

Features/Benefits
• Sealed against solder &
cleaning processes
• Thru-hole and surface mount models
• Snap-fitting actuator accepts
standard caps
• Tape & reel packaging available
• RoHS compliant models available

C&K EP Series Sealed Tiny Pushbutton Switches

Typical Applications
• Telecommunications and
networking equipment
• Computers and peripherals
• Instrumentation and controls

Models Available

Specifications

CONTACT RATING B contact material VA max. 20 V AC or DC max. See page A-11 for additional ratings.

ELECTRICAL LIFE EP11, EP21 models 60,000 make-and-break cycles at full load. EP12 models 30,000 cycles.

CONTACT RESISTANCE Below 20 typ. initial 2-4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE 109 min.

DIELECTRIC STRENGTH 1000 Vrms min. sea level.

OPERATING TEMPERATURE to 85ºC.

SOLDERABILITY Per MIL-STD-202F method 208D, or EIA RS-186E method 9 1 hour steam aging .

DEGREE OF PROTECTION IP57 Protection against harmful dust deposit, full-scale voltage protection, temporary immersion.

PACKAGING Surface mount switches standard in anti-static tape and reel packaging per EIA 481-3, see page A-12 for drawings and reel information. Tape and cover strip are conductive for use near statically sensitive components, consult Customer Service Center.

Materials

CASE & BUSHING Glass filled nylon 6/6, flame retardant, heat stabilized UL 94V-0 . SA surface mount High temperature material, glass filled nylon 4/6, flame retardant, heat stabilized UL 94V-0 .

PLUNGER Thermoplastic polyester or glass filled nylon UL 94V-0 , with internal o-ring seal. SA surface mount High temperature material, glass filled nylon 4/6, flame retardant, heat stabilized UL 94V-0 .

SWITCH SUPPORT Brass, matte-tin plated.

CONTACTS & TERMINALS B contact material Copper alloy, with gold plate over nickel plate. See page A-11 for additional contact materials.

TERMINAL SEAL Epoxy.

NOTE Any models supplied with Q, B, P, S, R or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to:

NOTE Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.

CAUTION PC mounting layouts and pads as shown are designed to be compatible with the latest equipment and reflow techniques. Care should be taken in the design and location of PC lands to suit individual needs. Orientation relative to reflow direction may significantly impact solder joint integrity.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-8 thru A-11. For additional options not shown in catalog, consult Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.

Switch Function EP11 SPST Off-Mom. EP12 SPDT On-Mom. EP21 DPST Off-Mom.

Plunger S high S1 high S2 high FP Flush R Snap-fitting, high

Bushing D1 Unthreaded

Seal E Epoxy

Terminations A Right angle, PC thru-hole C PC Thru-hole AV Vertical right angle, PC thru-hole AV3 Vertical right angle, snap-in, PC thru-hole SA Right angle, surface mount SA1 Right angle, surface mount rear facing V3 Vertical mount, v-bracket V31 Vertical mount, v-bracket, snap-in

EP11 & EP12 only W Wire wrap

Contact Material B Gold K Gold, tin-lead P Gold, matte-tin Q Silver M Silver, tin-lead S Silver, matte-tin G Gold over silver L Gold over silver, tin-lead R Gold over silver, matte tin

Dimensions are shown Inches mm Specifications and dimensions subject to change

Pushbutton

C&K EP Series Sealed Tiny Pushbutton Switches

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EP11FPD1AKE Datasheet file may be downloaded here without warranties.

Datasheet ID: EP11FPD1AKE 522491