E201SD1V3ME

E201SD1V3ME Datasheet

E201 STD. DP, On-None-On Bushing

Part	Datasheet
E201SD1V3ME	E201SD1V3ME (pdf)

Related Parts	Information
E201SD1AME	E201SD1AME
E108SD1AME	E108SD1AME
E105J2V31KE2	E105J2V31KE2
E201MD1AME	E201MD1AME
E201SD1CME	E201SD1CME
E101MD1AME	E101MD1AME
E101SD1AME	E101SD1AME
E201MD9AME	E201MD9AME

PDF Datasheet Preview
C&K E Series Sealed Miniature Toggle Switches Features/Benefits • Sealed against solder and cleaning process contaminants • UL 94V-0 Nylon case and bushing • Multi-positions • ESD protection available Typical Applications • Telecommunications • Instrumentation • Medical equipment Models Available Specifications CONTACT RATING B contact material VA max. 20 V AC or DC max. Q contact material E1XX & E2XX MODELS AMPS 125 V AC or 28 V DC 3 AMPS 250 V AC. E3XX MODELS 5 AMPS 125 V AC or 28 V DC 2 AMPS 250 V AC. See page F-25 for additional ratings. ELECTRICAL LIFE E1XX and E2XX models 40,000 make-and-break cycles at full load. E3XX models 30,000 cycles. CONTACT RESISTANCE Below 10 typ. initial 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE 109 min. ELECTROSTATIC DISCHARGE ESD OPTION F1 conductive bushing only. Dissipates up to 20,000 V DC from actuator to ground. DIELECTRIC STRENGTH 1000 Vrms min. sea level. OPERATING TEMPERATURE to 85ºC. SOLDERABILITY Per MIL-STD-202F method 208D, or EIA RS-186E method 9 1 hour steam aging . DEGREE OF PROTECTION IP57 Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. Materials CASE & BUSHING Glass filled nylon 6/6, flame retardant, heat stabilized UL 94V-0 . F1 conductive bushing option is impregnated with carbon fibers. ACTUATOR Brass, chrome plated with internal o-ring seal standard. SWITCH SUPPORT Brass or steel, tin plated. SWITCH SUPPORT RETAINER Stainless steel. CONTACTS & TERMINALS B contact material Copper alloy, with gold plate over nickel plate. Q contact material Copper alloy, silver plated. See page F-25 for additional contact materials. TERMINAL SEAL Epoxy. HARDWARE Nut & Locking ring Brass, nickel plated. Lockwasher Steel, nickel plated. NOTE Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F-19 thru F-25. For additional options not shown in catalog, consult our Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function E101 STD. SP, On-None-On Actuator E103 STD. SP, On-Off-On M STD. high E105 SP, Mom.-Off-Mom. S STD. high E107 SP, On-Off-Mom. L3 Plastic, high E108 SP, On-None-Mom. E201 STD. DP, On-None-On Bushing E203 STD. DP, On-Off-On D1 STD. high Terminations E205 DP, Mom.-Off-Mom. F1 STD. Conductive, A STD. Right angle, PC thru-hole Contact Material E207 DP, On-Off-Mom. high AV2 STD. Vertical right angle, PC thru-hole B STD. Gold E208 DP, On-None-Mom. D9 high C STD. PC Thru-hole K Gold, tin-lead

PDF Datasheet Preview

C&K E Series Sealed Miniature Toggle Switches

Features/Benefits
• Sealed against solder and cleaning
process contaminants
• UL 94V-0 Nylon case and bushing
• Multi-positions
• ESD protection available

Typical Applications
• Telecommunications
• Instrumentation
• Medical equipment

Models Available

Specifications

CONTACT RATING B contact material VA max. 20 V AC or DC max. Q contact material E1XX & E2XX MODELS AMPS 125 V AC or 28 V DC 3 AMPS 250 V AC. E3XX MODELS 5 AMPS 125 V AC or 28 V DC 2 AMPS 250 V AC. See page F-25 for additional ratings.

ELECTRICAL LIFE E1XX and E2XX models 40,000 make-and-break cycles at full load. E3XX models 30,000 cycles.

CONTACT RESISTANCE Below 10 typ. initial 2-4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE 109 min. ELECTROSTATIC DISCHARGE ESD OPTION F1 conductive
bushing only. Dissipates up to 20,000 V DC from actuator to ground.

DIELECTRIC STRENGTH 1000 Vrms min. sea level.

OPERATING TEMPERATURE to 85ºC.

SOLDERABILITY Per MIL-STD-202F method 208D, or EIA RS-186E method 9 1 hour steam aging .

DEGREE OF PROTECTION IP57 Protection against harmful dust deposit, full-scale voltage protection, temporary immersion.

Materials

CASE & BUSHING Glass filled nylon 6/6, flame retardant, heat stabilized UL 94V-0 . F1 conductive bushing option is impregnated with carbon fibers.

ACTUATOR Brass, chrome plated with internal o-ring seal standard. SWITCH SUPPORT Brass or steel, tin plated. SWITCH SUPPORT RETAINER Stainless steel. CONTACTS & TERMINALS B contact material Copper alloy,
with gold plate over nickel plate. Q contact material Copper alloy, silver plated. See page F-25 for additional contact materials. TERMINAL SEAL Epoxy. HARDWARE Nut & Locking ring Brass, nickel plated. Lockwasher Steel, nickel plated.

NOTE Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F-19 thru F-25. For additional options not shown in catalog, consult our Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.

Switch Function

E101 STD. SP, On-None-On Actuator

E103 STD. SP, On-Off-On M STD. high

E105 SP, Mom.-Off-Mom. S STD. high

E107 SP, On-Off-Mom.

L3 Plastic, high

E108 SP, On-None-Mom.

E201 STD. DP, On-None-On Bushing

E203 STD. DP, On-Off-On D1 STD. high

Terminations

E205 DP, Mom.-Off-Mom. F1 STD. Conductive, A STD. Right angle, PC thru-hole

Contact Material

E207 DP, On-Off-Mom.
high

AV2 STD. Vertical right angle, PC thru-hole B STD. Gold

E208 DP, On-None-Mom.

D9 high

C STD. PC Thru-hole

K Gold, tin-lead

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived E201SD1V3ME Datasheet file may be downloaded here without warranties.

Datasheet ID: E201SD1V3ME 522486