E301MYZQE

E301MYZQE Datasheet

E108 SP, On-None-Mom. E201 DP, On-None-On E203 DP, On-Off-On E205 DP, Mom.-Off-Mom. E207 DP, On-Off-Mom. E208 DP, On-None-Mom. E211 DP, On-On-On E213 DP, On-On-Mom. E215 DP, Mom.-On-Mom. **E301 3P, On-None-On

Part	Datasheet
E301MYZQE	E301MYZQE (pdf)

PDF Datasheet Preview
E Series Sealed Miniature Toggle Switches Features/Benefits • Sealed against solder and cleaning process contaminants • UL 94V-0 Nylon case and bushing • Multi-positions • ESD protection available • RoHS compliant models available Typical Applications • Telecommunications • Instrumentation • Medical equipment Specifications CONTACT RATING B contact material VA max. 20 V AC or DC max. Q contact material E1XX & E2XX MODELS AMPS 125 V AC or 28 V DC 3 AMPS 250 V AC. E3XX MODELS 5 AMPS 125 V AC or 28 V DC 2 AMPS 250 V AC. See page F-29 for additional ratings. ELECTRICAL LIFE E1XX and E2XX models 40,000 make-and-break cycles at full load. E3XX models 30,000 cycles. CONTACT RESISTANCE Below 10 typ. initial 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE 109 min. ELECTROSTATIC DISCHARGE ESD OPTION F1 conductive bushing only. Dissipates up to 20,000 V DC from actuator to ground. DIELECTRIC STRENGTH 1000 Vrms min. sea level. OPERATING TEMPERATURE to 85ºC. SOLDERABILITY Per MIL-STD-202F method 208D, or EIA RS-186E method 9 1 hour steam aging . DEGREE OF PROTECTION IP57 Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. Materials CASE & BUSHING Glass filled nylon 6/6, flame retardant, heat stabilized UL 94V-0 . F1 conductive bushing option is impregnated with carbon fibers. ACTUATOR Brass, chrome plated with internal o-ring seal standard. SWITCH SUPPORT Brass or steel, matte-tin plated. SWITCH SUPPORT RETAINER Stainless steel. CONTACTS & TERMINALS B contact material Copper alloy, with gold plate over nickel plate. Q contact material Copper alloy, silver plated. See page F-29 for additional contact materials. TERMINAL SEAL Epoxy. HARDWARE Nut & Locking ring Brass, nickel plated. Lockwasher Steel, nickel plated. NOTE Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant and compatible. NOTE Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages thru For additional options not shown in catalog, consult our Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function E101 SP, On-None-On Actuator E103 SP, On-Off-On M high E105 SP, Mom.-Off-Mom. S high E107 SP, On-Off-Mom. L3 Plastic, high E108 SP, On-None-Mom. E201 DP, On-None-On E203 DP, On-Off-On E205 DP, Mom.-Off-Mom. E207 DP, On-Off-Mom. E208 DP, On-None-Mom. E211 DP, On-On-On E213 DP, On-On-Mom. E215 DP, Mom.-On-Mom. *E301 3P, On-None-On Bushing D1 high F1 Conductive, high D9 high *Y Threaded, high Terminations A Right angle, PC thru-hole AV2 Vertical right angle, PC thru-hole C PC Thru-hole V3 high, V-bracket Z Solder lug A3 Right angle, PC thru-hole AV3 Vertical right angle, PC thru-hole V6 high, V-bracket F F1 available with SP and DP versions only, please see page F-19 V9 high, V-bracket V31 high, snap-in V-bracket V61 high, snap-in V-bracket W long, wire wrap Z3 Quick connect ** Y threaded bushing available for 1 & 2 pole only Contact Material B Gold P Gold, matte-tin Q Silver S Silver, matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy Dimensions are shown Inches mm Specifications and dimensions subject to change Toggle

PDF Datasheet Preview

E Series Sealed Miniature Toggle Switches

Features/Benefits
• Sealed against solder and cleaning
process contaminants
• UL 94V-0 Nylon case and bushing
• Multi-positions
• ESD protection available
• RoHS compliant models available

Typical Applications
• Telecommunications
• Instrumentation
• Medical equipment

Specifications

CONTACT RATING B contact material VA max. 20 V AC or DC max. Q contact material E1XX & E2XX MODELS AMPS 125 V AC or 28 V DC 3 AMPS 250 V AC. E3XX MODELS 5 AMPS 125 V AC or 28 V DC 2 AMPS 250 V AC. See page F-29 for additional ratings.

ELECTRICAL LIFE E1XX and E2XX models 40,000 make-and-break cycles at full load. E3XX models 30,000 cycles.

CONTACT RESISTANCE Below 10 typ. initial 2-4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE 109 min. ELECTROSTATIC DISCHARGE ESD OPTION F1 conductive
bushing only. Dissipates up to 20,000 V DC from actuator to ground.

DIELECTRIC STRENGTH 1000 Vrms min. sea level.

OPERATING TEMPERATURE to 85ºC.

SOLDERABILITY Per MIL-STD-202F method 208D, or EIA RS-186E method 9 1 hour steam aging .

DEGREE OF PROTECTION IP57 Protection against harmful dust deposit, full-scale voltage protection, temporary immersion.

Materials

CASE & BUSHING Glass filled nylon 6/6, flame retardant, heat stabilized UL 94V-0 . F1 conductive bushing option is impregnated with carbon fibers.

ACTUATOR Brass, chrome plated with internal o-ring seal standard. SWITCH SUPPORT Brass or steel, matte-tin plated. SWITCH SUPPORT RETAINER Stainless steel. CONTACTS & TERMINALS B contact material Copper alloy,
with gold plate over nickel plate. Q contact material Copper alloy, silver plated. See page F-29 for additional contact materials. TERMINAL SEAL Epoxy. HARDWARE Nut & Locking ring Brass, nickel plated. Lockwasher Steel, nickel plated.

NOTE Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant and compatible.

NOTE Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages thru For additional options not shown in catalog, consult our Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.

Switch Function

E101 SP, On-None-On

Actuator

E103 SP, On-Off-On

M high

E105 SP, Mom.-Off-Mom. S high

E107 SP, On-Off-Mom.

L3 Plastic, high

E108 SP, On-None-Mom. E201 DP, On-None-On E203 DP, On-Off-On E205 DP, Mom.-Off-Mom. E207 DP, On-Off-Mom. E208 DP, On-None-Mom. E211 DP, On-On-On E213 DP, On-On-Mom. E215 DP, Mom.-On-Mom. **E301 3P, On-None-On

Bushing D1 high *F1 Conductive,
high D9 high **Y Threaded, high

Terminations A Right angle, PC thru-hole AV2 Vertical right angle, PC thru-hole C PC Thru-hole V3 high, V-bracket Z Solder lug A3 Right angle, PC thru-hole AV3 Vertical right angle, PC thru-hole V6 high, V-bracket

F * F1 available with SP and DP versions only, please see page F-19

V9 high, V-bracket V31 high, snap-in V-bracket V61 high, snap-in V-bracket W long, wire wrap Z3 Quick connect
** Y threaded bushing available for 1 & 2 pole only

Contact Material B Gold P Gold, matte-tin Q Silver S Silver, matte-tin G Gold over silver R Gold over silver, matte-tin

Seal E Epoxy

Dimensions are shown Inches mm Specifications and dimensions subject to change

Toggle

More datasheets: 831607C2.E | 831607B2.E | 831607B2.A | 831607C6.0 | 831607B6.E | 831607B2.L | 831607C3.0 | 831607C3.E | 831607C3.RLR | C3FSV7

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived E301MYZQE Datasheet file may be downloaded here without warranties.

Datasheet ID: E301MYZQE 522484