1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 29
Part | Datasheet |
---|---|
![]() |
CCM03-3012 (pdf) |
Related Parts | Information |
---|---|
![]() |
CCM03-3001 |
![]() |
CCM03-3754 |
![]() |
CCM03-3518 |
![]() |
CCM03-3517 |
![]() |
CCM03-3504 |
![]() |
CCM03-3013 |
![]() |
CCM03-3758 |
![]() |
CCM03-3009 |
PDF Datasheet Preview |
---|
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 29 CCM03 MK II A new range of CCM03 connectors have been developed to interface with SIM/SAM cards as by GSM1111 and ENV1375-1. The connectors are available with either hinged covers or covers and have been designed to minimize the amount of space needed for PCB mounting. Hinged Cover • Available with 6 or 8 contacts, with or without PCB locating pegs. • Available with card presence switch. • The cover springs open when unlocked while the card is in place. • The molding is polarized so that the cover can only be closed if the card is correctly inserted. • The cover can be replaced without removing the connector from the PCB • Inspection slots allow an electrical test to be made without opening the cover. • The overall height of the connector is only mm. The amount of space needed to mount the connector is just mm x mm Fixed Cover • Available with 6 or 8 contacts. • The overall height of the connector is mm max. Only mm x mm of board space is required to mount the connector. General • With tape and reel packaging as standard, the connectors are designed to be automatically pick-and-placed. • The high temperature thermoplastic moldings are suited for infrared and convection soldering processes. • By using an inlay in the contact area the life of the precious metal is extended by over 10 times that of standard gold plating. • Robustly formed printed circuit tails allow a co-planarity of mm to be maintained. Construction Contacts Plating Moldings Spring Copper alloy Contact area Gold alloy inlay Terminals Tin lead 2µ min High temp. thermoplastic UL 94V-0 rated Stainless steel Mechanical data Number of Contacts Mechanical life, hinged cover Mechanical life, cover Durability of inlay, hinged cover Durability of inlay, cover Card insertion force Card extraction force Contact force Slide locking force Vibration Shock 6 or 8 10,000 cycles min 50,000 cycles 10,000 cycles min see note 1 5,000 cycles Hinged cover 1 N max Fixed cover 3 N max Hinged cover 1 N max Fixed cover N min / 3 N max N min / N max 2 N min / 6 N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude mm Max electrical discontinuity 1µs Peak value 500 m/s2 Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs Electrical data Insulation resistance Contact resistance max Switching current Dielectric strength 1,000 min 100 max 10 µA min / 1 A max 750 Vrms min Environmental data Operating temperature Soldering temperature Damp heat Salt mist -40°C to +85°C Temperature/time acc. to CECC00802 para. Fig. 3 with peak temperature 250°C IEC 512 test number 11c 10 days IEC 512 test number 11f 96 hours Note 1 Inlay precious metal rating is based on a very abrasive card being used and is intended to represent worst case. Dimensions are shown in mm Dimensions subject to change 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 30 CCM03 MK II Ordering code CCM03-3001 R102 CCM03-3002 R102 CCM03-3003 R102 CCM03-3004 R102 CCM03-3005 R701** CCM03-3006 R701** CCM03-3007 R701** CCM03-3008 R701** CCM03-3009 R102 CCM03-3013 R102 CCM03-3504 R122 CCM03-3505 R122 CCM03-3512 R102* CCM03-3514 R102 N° of Contacts 6 8 6 8 6 8 6 Cover Hinged Fixed Hinged PCB Locating Pegs mm No Yes No Yes No Yes No Yes No Stand off mm Quantity per reel 1000 700 1000 1200 1000 *Note Terminal width = 1 mm - Length = mm. For double **Note On request - Depending on quantities. Packaging CCM03 are packaged in accordance with EIA Standard packaging is on tape and reel. A code is added to the part number that indicates reel packaging and the number of components per reel. There are 5 reels per box. Metal lock Flat Bump No Bump Switch lock No Yes Card Presence switch No Yes No Reel Diameter 360 mm Reel Width mm X 344 mm Y 350 mm Z 152 mm Dimensions are shown in mm Dimensions subject to change 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 31 CCM03 MK II Hinged Cover Dimensional Drawings Hinged Cover CCM03 - 3001 6 contacts 3002 6 contacts - PCB locating pegs 3003 8 contacts 3004 8 contacts - PCB locating pegs 3009 6 contacts - lock with bump Open Notes Coplanarity of soldering surfaces ± mm *Pegs Height mm and Ø 1 mm PCB Layout CCM03-3001 / 3002 / 3009 With pegs* Without pegs CCM03-3003 / 3004 Mounting pegs only available with CCM03-3002 / 3004 Unless otherwise stated, tolerances are ± mm Dimensions are shown in mm Dimensions subject to change 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 32 CCM03 MK II Hinged Cover Dimensional Drawings Hinged Cover CCM03 - 3005 6 contacts - with stand off mm Open Note Coplanarity of soldering surfaces ± mm PCB Layout CCM03-3005 Ordering Code Part Number CCM03-3517 CCM03-3518 N° of Contacts Copper alloy Gold alloy inlay Au/Ag/Pd Tin lead 2µ min Sn/Pb High temp. thermoplastic, UL94V-0 Stainless steel 6 10,000 cycles min 10,000 cycles min N min / N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude mm Max electrical discontinuity 1µs 1,000 min 100 max 10 µA min / 1 A max 750 Vrms min Normally open 100 max 250 Vrms min 1mA min / 10m A max VA -40°C to +85°C Temperature/time acc. to CECC00802 para. Fig. 3 with peak temperature 250°C IEC 512 test number 11c 10 days IEC 512 test number 11f 96 hours Cover Hinged Card Presence Switch Quantity per reel 1300 1300 Dimensions are shown in mm Dimensions subject to change 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 41 CCM03 MK II with Auto Lock cover Dimensional Drawings Hinged Cover CCM03-3517 6 contacts OPEN Note Coplanarity of soldering surfaces ± mm PCB Layout CCM03-3517 Unless otherwise stated, tolerances are ± mm Dimensions are shown in mm Dimensions subject to change 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 42 CCM03 MK II with Auto Lock cover Dimensional Drawings Hinged Cover CCM03-3518 6 contacts OPEN Note Coplanarity of soldering surfaces ± mm PCB Layout CCM03-3518 Unless otherwise stated, tolerances are ± mm Dimensions are shown in mm Dimensions subject to change 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 43 CCM03 MK III Introducing the new CCM03 Series SIM/SAM Card Connector from ITT Cannon Switch Products, featuring an integrated card detection switch. This connector provides a competitive advantage to smart card reader device manufacturers by minimizing the space usage on the PCB, and features a side entry to offer convenient card access without opening the device. The unique design of this compact-size connector makes it ideal for telecommunications, portable electronics, POS terminals and similar applications, and meets GSM 11-11 and EMV • Unique card-guiding design. • 6 spoon-shaped, gold-alloyed contacts resist wear and improve connectivity. • Sealed card detection switches reduce connectivity problems caused by dust or moisture. • Switch design detects and holds the card while providing contact. Ordering Code Part Number CCM03-3752 R102 CCM03-3753 R102 CCM03-3754 R102 CCM03-3757 R102 CCM03-3758 R102 N° of Contacts Cover 6 Without chamfer With chamfer With chamfer With chamfer With chamfer Switch Testing Hole Yes No Yes No Yes Ground Terminal No Yes Quantity per reel 1000 Dimensions are shown in mm Dimensions subject to change 1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 44 CCM03 MK III Dimensional Drawings CCM03 3753 / 3757 CCM03 3752 / 3754 / 3758 PCB Layout CCM03 3752 / 3753 / 3754 CCM03 3757 / 3758 Dimensions are shown in mm Dimensions subject to change |
More datasheets: ACC004 | CDKWM8351-S-1 | WM8351CGEB/RV | WM8351CGEB/V | CCM03-3001 | CCM03-3754 | CCM03-3518 | CCM03-3517 | CCM03-3504 | CCM03-3013 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CCM03-3012 Datasheet file may be downloaded here without warranties.