CCM01-2252

CCM01-2252 Datasheet

1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8

Part	Datasheet
CCM01-2252	CCM01-2252 (pdf)

PDF Datasheet Preview
1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8 CCM01 MK I CCM01 MK I connectors have contacts and a blade card detection switch not sealed . These connectors are intended for applications where the card usage is relatively low and the environment is benign. • Available with 8 or 16 through hole contacts. • A normally closed blade switch detects when the card is fully inserted. • Snap in boardlocks hold the connector in place prior to soldering. Construction Contacts Plating Moldings Card detection switch Mechanical data Number of Contacts Mechanical life Card insertion force Card extraction force Contact force Vibration Shock Electrical data Insulation resistance Contact resistance max Switching current Dielectric strength Card detection switch Rc card detection switch Dielectric strength card detection switch current rating Maximum switch power Environmental data Operating temperature Soldering temperature Damp heat Salt mist Card detection switch Ordering code Part Number CCM01-1NF CCM01-2NF Packaging 20 per tray, 10 trays per box. Order multiple 200 Copper alloy Contact area Gold over nickel Terminals Tin lead 2µ min Thermoplastic UL 94V-0 rated Copper alloy 8 or 16 10,000 cycles min 10 N max 1 N min / 10N max N min / N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude mm Max electrical discontinuity 1µs Peak value 500 m/s2 Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs 1,000 min 100 max 10 µA min / 1 A max 750 Vrms min Normally closed 100 max 250 Vrms min 1 mA min / 10 mA max VA -40°C to +85°C Wave 260°C / 5 sec IEC 512 test number 11c 10 days IEC 512 test number 11f 96 hours Not sealed blade switch N° of Contacts 8 16 Packaging Multiple 200 Dimensions are shown in mm Dimensions subject to change 1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 9 CCM01 MK I Dimensional Drawings CCM01-2NF CCM01-1NF with 8 contacts not shown PCB Layout CCM01-1NF CCM01-2NF Dimensions are shown in mm Dimensions subject to change 1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 10 CCM01 MK II The CCM01 MK II connectors with contacts have been developed for applications where a landing contact mechanism is not required but performance and reliability are still key considerations. • Available with 8 or 16 contacts which are designed to give a consistently reliable normal force over the life of the connector. • For added reliability, the card detection switch which is normally open is sealed against dust and debris. • Available with through-hole or surface mount contact termination and its lightweight design means that the connector can be automatically pickand-placed. • The moldings are made from high temperature thermoplastics suited for infrared and convection soldering processes. • Plastic springs in the cover give a positive feel as the card is fully inserted. In case of special version with low card insertions and withdrawal, then the CCM connector is supplied without this spring effect. • The reduced size of the contact base saves PCB space, makes the connector more stable during soldering and creates an air gap between the contacts and card entry slot, so reducing the risk of an electrostatic transfer to the PCB. • By using an inlay in the contact area, the life of the precious metal is extended by more than 10 times that of standard gold plating. • A chamfered opening to the card entry slot improves the card guidance into the connector. • The contact area is spooned to reduce the risk of accidental or deliberate damage and to optimize the electrical connection with the card. • Robustly formed printed circuit tails allow a coplanarity of mm to be maintained. Construction Contacts Plating Moldings Card detection switch Copper alloy Contact area Gold alloy inlay Terminals Tin lead 2µ min High temp. thermoplastic UL 94V-0 rated Stainless steel and copper alloy Mechanical data Number of Contacts Mechanical life Durability of inlay Card insertion force Card extraction force Contact force Card detection switch actuation force Vibration Shock 8 or 16 100,000 cycles min

PDF Datasheet Preview

1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8

CCM01 MK I

CCM01 MK I connectors have contacts and a blade card detection switch not sealed .

These connectors are intended for applications where the card usage is relatively low and the environment is benign.
• Available with 8 or 16 through hole contacts.
• A normally closed blade switch detects when the card is fully inserted.
• Snap in boardlocks hold the connector in place prior to soldering.

Construction Contacts Plating

Moldings Card detection switch

Mechanical data Number of Contacts Mechanical life Card insertion force Card extraction force Contact force Vibration

Shock

Electrical data Insulation resistance Contact resistance max Switching current Dielectric strength Card detection switch Rc card detection switch Dielectric strength card detection switch current rating Maximum switch power

Environmental data Operating temperature Soldering temperature Damp heat Salt mist Card detection switch
Ordering code

Part Number CCM01-1NF CCM01-2NF

Packaging 20 per tray, 10 trays per box. Order multiple 200

Copper alloy Contact area Gold over nickel Terminals Tin lead 2µ min Thermoplastic UL 94V-0 rated Copper alloy
8 or 16 10,000 cycles min 10 N max 1 N min / 10N max N min / N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude mm Max electrical discontinuity 1µs Peak value 500 m/s2 Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs
1,000 min 100 max 10 µA min / 1 A max 750 Vrms min Normally closed 100 max
250 Vrms min 1 mA min / 10 mA max VA
-40°C to +85°C Wave 260°C / 5 sec IEC 512 test number 11c 10 days IEC 512 test number 11f 96 hours Not sealed blade switch

N° of Contacts 8 16

Packaging Multiple 200

Dimensions are shown in mm Dimensions subject to change
1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 9

CCM01 MK I

Dimensional Drawings

CCM01-2NF CCM01-1NF with 8 contacts not shown

PCB Layout

CCM01-1NF

CCM01-2NF

Dimensions are shown in mm Dimensions subject to change
1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 10

CCM01 MK II

The CCM01 MK II connectors with contacts have been developed for applications where a landing contact mechanism is not required but performance and reliability are still key considerations.
• Available with 8 or 16 contacts which are designed to give a consistently reliable normal force over the life of the connector.
• For added reliability, the card detection switch which is normally open is sealed against dust and debris.
• Available with through-hole or surface mount contact termination and its lightweight design means that the connector can be automatically pickand-placed.
• The moldings are made from high temperature thermoplastics suited for infrared and convection soldering processes.
• Plastic springs in the cover give a positive feel as the card is fully inserted. In case of special version with low card insertions and withdrawal, then the CCM connector is supplied without this spring effect.
• The reduced size of the contact base saves PCB space, makes the connector more stable during soldering and creates an air gap between the contacts and card entry slot, so reducing the risk of an electrostatic transfer to the PCB.
• By using an inlay in the contact area, the life of the precious metal is extended by more than 10 times that of standard gold plating.
• A chamfered opening to the card entry slot improves the card guidance into the connector.
• The contact area is spooned to reduce the risk of accidental or deliberate damage and to optimize the electrical connection with the card.
• Robustly formed printed circuit tails allow a coplanarity of mm to be maintained.

Construction Contacts Plating

Moldings Card detection switch

Copper alloy Contact area Gold alloy inlay Terminals Tin lead 2µ min High temp. thermoplastic UL 94V-0 rated Stainless steel and copper alloy

Mechanical data Number of Contacts Mechanical life Durability of inlay Card insertion force Card extraction force

Contact force Card detection switch actuation force

Vibration

Shock
8 or 16
100,000 cycles min

More datasheets: 2365 | 2367 | 2369 | 2371 | 2373 | FFAF40U60DNTU | 22-21UBC/C430/TR8 | 727 | AAH-438-28.63636MHZ-T3 | SEN0224

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CCM01-2252 Datasheet file may be downloaded here without warranties.

Datasheet ID: CCM01-2252 522451