PEX8114-BD RDK-F

PEX8114-BD RDK-F Datasheet

PEX 8114

Part	Datasheet
PEX8114-BD RDK-F	PEX8114-BD RDK-F (pdf)

Related Parts	Information
PEX8114-BD RDK-R	PEX8114-BD RDK-R
PEX8114-BD13BI G	PEX8114-BD13BI G
PEX8114-BC13BI G	PEX8114-BC13BI G

PDF Datasheet Preview
Version 2007 PEX 8114 General Features 17mm x 17mm o Leaded and lead-free ROHS versions available o Low power 2W o No heat sink required o EEPROM configuration option o V core supply voltage o DC and AC JTAG and Scalable PCI Express Interface o x4 Link configurable as x1, x2 or x4 o Full-duplex PCI Express lanes; smallest link width o 256 byte maximum payload size o PCI Express Base specification 1.0a compliant o End-to-end CRC and data poisoning o Advanced error reporting o Link and device power management o Advanced flow control o Hot Plug o Turn off unused lanes for power reduction Advanced PCI-X Interface o PCI-X v 1.0b 64 bits at 133, 100 or 66 MHz o PCI 32 or 64 bits at 66, 50, 33 or 25 MHz o 8-outstanding split transactions o Internal arbiter supports up to 4 external masters o 3.3V I/O Message Signal Interrupt MSI support o Provides up to four PCI/PCI-X clocks o Scratchpad and doorbell registers ExpressLane PCI Express-to-PCI/PCI-X Bridge Flexible, High-Performance Bridge in a Small Package The bridge is equipped with a standard, but flexible PCI Express port that scales to x1, x2 or x4 lanes with a maximum of 1 Gigabyte per second of throughput per transmit and receive direction. With four Gbps integrated SerDes, the standard PCI Express signaling delivers the highest bandwidth with the lowest possible pin count using LVDS technology. The ExpressLane PEX 8114 has a single parallel bus segment supporting the advanced PCI-X protocol, with a 64-bit wide parallel data path running at 133MHz. The bridge also supports conventional PCI operation. While both sides of the bridge are evenly matched, the device also supports internal queues with flow control features to optimize throughput and traffic flow. The small 17mm x 17mm footprint in standard Plastic BGA packaging makes the ExpressLane PEX 8114 ideal for a variety of applications where board real estate is at a premium. Leaded and lead-free ROHS versions are available. High Performance PCI Express Interface Board and System Design Applications Motherboards The simple design and small footprint of the ExpressLane PEX 8114 make it an ideal bridge solution for the motherboard see Figure 1 , providing for PCI or PCI-X slot connectivity and for interface to legacy native PCI or PCI-X silicon I/O components. Adapter Boards-Forward Bridge In Forward Mode see Figure 3 , the ExpressLane PEX 8114 can be used to quickly upgrade legacy PCI or PCI-X adapter board designs to be compatible with PCI Express standard interface slots. Figure Forward Bridge on Motherboard Figure Forward Mode Mezzanine Cards The small footprint and low power of the ExpressLane PEX 8114 make it ideal for use in mezzanine products based on the latest PICMG standards for PCI Express see Figure Figure Remote Expansion of PCI/PCI-X-Based Systems Development Tools PLX offers hardware and software tools PEX 8114RDK to enable rapid customer design. These tools include the Hardware Development Kit HDK and the Software Development Kit SDK . Each ExpressLane PEX 8114RDK can be installed in a motherboard to test and validate customer software and to evaluate the chip’s features and benefits. Figure PEX 8114 Forward RDK The SDK tool set includes 1 Linux and Windows drivers, 2 C/C++ Source code, Objects, libraries, and 3 User’s Guides, Application examples and Tutorials. Product Ordering Information PLX Technology, Inc. 870 W. Maude Ave. Sunnyvale, CA 94085 USA Tel 1-800-759-3735 Tel 1-408-774-9060 Fax 1-408-774-2169 Email: Web Site: Part Number PEX 8114-BD13BI PEX 8114-BD13BI G PEX 8114RDK-F PEX 8114RDK-R Please visit the PLX Web site at or contact PLX sales at 408-774-9060 for sampling. 2007 PLX Technology, Inc. All rights reserved. PLX and the PLX logo are registered trademarks of PLX Technology, Inc. ExpressLane is a trademark of PLX Technology, Inc., which may be registered in some jurisdiction. All other product names that appear in this material are for identification purposes only and are acknowledged to be trademarks or registered trademarks of their respective companies. Information supplied by PLX is believed to be accurate and reliable, but PLX Technology, Inc. assumes no responsibility for any errors that may appear in this material. PLX Technology, Inc. reserves the right, without notice, to make changes in product design or specification. PEX8114-SIL-PB-5.0 11/07

PDF Datasheet Preview

Version 2007

PEX 8114

General Features
17mm x 17mm o Leaded and lead-free ROHS versions
available o Low power 2W o No heat sink required o EEPROM configuration option o V core supply voltage o DC and AC JTAG and

Scalable PCI Express Interface
o x4 Link configurable as x1, x2 or x4 o Full-duplex PCI Express lanes;
smallest link width o 256 byte maximum payload size o PCI Express Base specification 1.0a
compliant o End-to-end CRC and data poisoning o Advanced error reporting o Link and device power management o Advanced flow control o Hot Plug o Turn off unused lanes for power
reduction

Advanced PCI-X Interface
o PCI-X v 1.0b 64 bits at 133, 100 or 66 MHz
o PCI 32 or 64 bits at 66, 50, 33 or 25 MHz
o 8-outstanding split transactions o Internal arbiter supports up to 4
external masters o 3.3V I/O Message Signal Interrupt MSI
support o Provides up to four PCI/PCI-X clocks o Scratchpad and doorbell registers

ExpressLane PCI Express-to-PCI/PCI-X Bridge

Flexible, High-Performance Bridge in a Small Package

The bridge is equipped with a standard, but flexible PCI Express port that scales to x1, x2 or x4 lanes with a maximum of 1 Gigabyte per second of throughput per transmit and receive direction. With four Gbps integrated SerDes, the standard PCI Express signaling delivers the highest bandwidth with the lowest possible pin count using LVDS technology.

The ExpressLane PEX 8114 has a single parallel bus segment supporting the advanced PCI-X protocol, with a 64-bit wide parallel data path running at 133MHz. The bridge also supports conventional PCI operation.

While both sides of the bridge are evenly matched, the device also supports internal queues with flow control features to optimize throughput and traffic flow.

The small 17mm x 17mm footprint in standard Plastic BGA packaging makes the ExpressLane PEX 8114 ideal for a variety of applications where board real estate is at a premium. Leaded and lead-free ROHS versions are available.

High Performance PCI Express Interface

Board and System Design Applications

Motherboards The simple design and small footprint of the ExpressLane PEX 8114 make it an ideal bridge solution for the motherboard see Figure 1 , providing for PCI or PCI-X slot connectivity and for interface to legacy native PCI or PCI-X silicon I/O components.

Adapter Boards-Forward Bridge In Forward Mode see Figure 3 , the ExpressLane PEX 8114 can be used to quickly upgrade legacy PCI or PCI-X adapter board designs to be compatible with PCI Express standard interface slots.

Figure Forward Bridge on Motherboard

Figure Forward Mode

Mezzanine Cards The small footprint and low power of the ExpressLane PEX 8114 make it ideal for use in mezzanine products based on the latest PICMG standards for PCI Express see Figure

Figure Remote Expansion of PCI/PCI-X-Based Systems

Development Tools

PLX offers hardware and software tools PEX 8114RDK to enable rapid customer design. These tools include the Hardware Development Kit HDK and the Software Development Kit SDK .

Each ExpressLane PEX 8114RDK can be installed in a motherboard to test and validate customer software and to evaluate the chip’s features and benefits.

Figure PEX 8114 Forward RDK

The SDK tool set includes 1 Linux and Windows drivers, 2 C/C++ Source code, Objects, libraries, and 3 User’s Guides, Application examples and Tutorials.
Product Ordering Information

PLX Technology, Inc. 870 W. Maude Ave. Sunnyvale, CA 94085 USA Tel 1-800-759-3735 Tel 1-408-774-9060 Fax 1-408-774-2169 Email:

Web Site:

Part Number PEX 8114-BD13BI PEX 8114-BD13BI G PEX 8114RDK-F PEX 8114RDK-R

Please visit the PLX Web site at or contact PLX sales at 408-774-9060 for sampling.
2007 PLX Technology, Inc. All rights reserved. PLX and the PLX logo are registered trademarks of PLX Technology, Inc. ExpressLane is a trademark of PLX Technology, Inc., which may be registered in some jurisdiction. All other product names that appear in this material are for identification purposes only and are acknowledged to be trademarks or registered trademarks of their respective companies. Information supplied by PLX is believed to be accurate and reliable, but PLX Technology, Inc. assumes no responsibility for any errors that may appear in this material. PLX Technology, Inc. reserves the right, without notice, to make changes in product design or specification.

PEX8114-SIL-PB-5.0
11/07

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PEX8114-BD RDK-F Datasheet file may be downloaded here without warranties.

Datasheet ID: PEX8114-BD RDK-F 520503