MGA-81563-TR1

MGA-81563-TR1 Datasheet

MGA-81563 GHz 3 V, 14 dBm Amplifier

Part	Datasheet
MGA-81563-TR1	MGA-81563-TR1 (pdf)

PDF Datasheet Preview
MGA-81563 GHz 3 V, 14 dBm Amplifier Data Sheet Avago’s MGA-81563 is an economical, easy-to-use GaAs MMIC amplifier that offers excellent power and low noise figure for applications from to 6 GHz. Packaged in an ultra-miniature SOT-363 package, it requires half the board space of a SOT-143 package. The output of the amplifier is matched to 50Ω better than VSWR across the entire bandwidth. The input is partially matched to 50Ω better than VSWR below 4 GHz and fully matched to 50Ω better than 2:1 VSWR above. A simple series inductor can be added to the input to improve the input match below 4 GHz. The amplifier allows a wide dynamic range by offering a dB NF coupled with a +27 dBm Output IP The circuit uses state-of-the-art PHEMT technology with proven reliability. On-chip bias circuitry allows operation from a single +3 V power supply, while resistive feedback ensures stability K>1 over all frequencies and temperatures. x Lead-free Option Available dBm P at GHz 1dB +17 dBm P at GHz sat x Single +3V Supply x dB Noise Figure at GHz x dB Gain at GHz x Ultra-miniature Package x Unconditionally Stable x Buffer or Driver Amp for PCS, PHS, ISM, SATCOM and WLL Applications x High Dynamic Range LNA Simplified Schematic Surface Mount Package SOT-363 SC-70 INPUT OUTPUT and Vd Pin Connections and Package Marking GND 1 GND 2 INPUT 3 OUTPUT and Vd 5 GND 4 GND Note Package marking provides orientation and identification. "81" = Device Code "x" = Date code character identifies month of manufacture BBIIAASS GND 1, 2, 4, 5 Attention Observe precautions for handling electrostatic sensitive devices. ESD Human Body Model Class 0 Refer to Avago Application Note A004R Electrostatic Discharge Damage and Control. MGA-81563 Absolute Maximum Ratings Symbol V T STG Parameter Device Voltage, RF Output to Ground Device Voltage, Gate to Drain Range of RF Input Voltage to Ground CW RF Input Power Channel Temperature Storage Temperature Units V dBm °C °C Absolute Maximum[1] +13 165 -65 to 150 Thermal Resistance[2] Tch-c = 220°C/W Permanent damage may occur if any of these limits are exceeded. T = 25°C T is defined to be the temperature at the package pins where Part Number Ordering Information No. of Devices MGA-81563-TR1G 3000 MGA-81563-TR2G 10000 MGA-81563-BLKG Container 7" Reel 13" Reel antistatic bag Device Orientation REEL TOP VIEW 4 mm END VIEW USER FEED DIRECTION CARRIER TAPE COVER TAPE Tape Dimensions and Product Orientation for Outline 63 D1 t1 CARRIER TAPE THICKNESS Tt COVER TAPE THICKNESS 10° MAX. 10° MAX. CAVITY LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER PERFORATION DIAMETER PITCH POSITION CARRIER TAPE WIDTH THICKNESS COVER TAPE DISTANCE WIDTH TAPE THICKNESS CAVITY TO PERFORATION WIDTH DIRECTION CAVITY TO PERFORATION LENGTH DIRECTION A0 B0 K0 P D1 D P0 E SIZE mm ± ± ± ± + ± ± ± SIZE INCHES ± ± ± ± + + ± ± For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2010 Avago Technologies. All rights reserved. Obsoletes AV01-0190EN AV02-0966EN - May 22, 2010

PDF Datasheet Preview

MGA-81563 GHz 3 V, 14 dBm Amplifier

Data Sheet

Avago’s MGA-81563 is an economical, easy-to-use GaAs MMIC amplifier that offers excellent power and low noise figure for applications from to 6 GHz. Packaged in an ultra-miniature SOT-363 package, it requires half the board space of a SOT-143 package.

The output of the amplifier is matched to 50Ω better than VSWR across the entire bandwidth. The input is partially matched to 50Ω better than VSWR below 4 GHz and fully matched to 50Ω better than 2:1 VSWR above. A simple series inductor can be added to the input to improve the input match below 4 GHz. The amplifier allows a wide dynamic range by offering a dB NF coupled with a +27 dBm Output IP

The circuit uses state-of-the-art PHEMT technology with proven reliability. On-chip bias circuitry allows operation from a single +3 V power supply, while resistive feedback ensures stability K>1 over all frequencies and temperatures.
x Lead-free Option Available
dBm P at GHz 1dB
+17 dBm P at GHz sat
x Single +3V Supply
x dB Noise Figure at GHz
x dB Gain at GHz
x Ultra-miniature Package
x Unconditionally Stable
x Buffer or Driver Amp for PCS, PHS, ISM, SATCOM and WLL Applications
x High Dynamic Range LNA

Simplified Schematic

Surface Mount Package SOT-363 SC-70

INPUT

OUTPUT and Vd

Pin Connections and Package Marking

GND 1 GND 2 INPUT 3

OUTPUT and Vd
5 GND
4 GND

Note Package marking provides orientation and identification. "81" = Device Code "x" = Date code character identifies month of manufacture

BBIIAASS

GND 1, 2, 4, 5

Attention Observe precautions for handling electrostatic sensitive devices. ESD Human Body Model Class 0 Refer to Avago Application Note A004R Electrostatic Discharge Damage and Control.

MGA-81563 Absolute Maximum Ratings

Symbol V

T STG

Parameter Device Voltage, RF Output to Ground Device Voltage, Gate to Drain Range of RF Input Voltage to Ground CW RF Input Power Channel Temperature Storage Temperature

Units V
dBm °C °C

Absolute Maximum[1]
+13 165 -65 to 150

Thermal Resistance[2] Tch-c = 220°C/W

Permanent damage may occur if any of
these limits are exceeded.

T = 25°C T is defined to be the
temperature at the package pins where
Part Number Ordering Information

No. of Devices

MGA-81563-TR1G
3000

MGA-81563-TR2G
10000

MGA-81563-BLKG

Container 7" Reel 13" Reel antistatic bag

Device Orientation

REEL

TOP VIEW 4 mm

END VIEW

USER FEED DIRECTION

CARRIER TAPE

COVER TAPE

Tape Dimensions and Product Orientation for Outline 63

D1 t1 CARRIER TAPE THICKNESS

Tt COVER TAPE THICKNESS
10° MAX.
10° MAX.

CAVITY

LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER

PERFORATION

DIAMETER PITCH POSITION

CARRIER TAPE WIDTH THICKNESS

COVER TAPE DISTANCE

WIDTH TAPE THICKNESS

CAVITY TO PERFORATION WIDTH DIRECTION

CAVITY TO PERFORATION LENGTH DIRECTION

A0 B0 K0 P D1

D P0 E

SIZE mm
± ± ± ± +
± ± ±

SIZE INCHES
± ± ± ± +
+ ± ±

For product information and a complete list of distributors, please go to our web site:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2010 Avago Technologies. All rights reserved. Obsoletes AV01-0190EN AV02-0966EN - May 22, 2010

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MGA-81563-TR1 Datasheet file may be downloaded here without warranties.

Datasheet ID: MGA-81563-TR1 520450