HSMP-386Z-BLKG

HSMP-386Z-BLKG Datasheet

HSMP-386Z General Purpose RF PIN Diodes In Surface Mount SOD-323 Package

Part	Datasheet
HSMP-386Z-BLKG	HSMP-386Z-BLKG (pdf)

Related Parts	Information
HSMP-386Z-TR1G	HSMP-386Z-TR1G

PDF Datasheet Preview
HSMP-386Z General Purpose RF PIN Diodes In Surface Mount SOD-323 Package Data Sheet Description/Application Avago Technologies’s HSMP-386Z is a General Purpose PIN Diode housed in a low cost surface mount SOD323 package. This package offers customers who already use the PIN Diode in SOT-23 and SOT-323 packages, a logical transition to a smaller package outline to accommodate end product design with limited board space. The HSMP-386Z is designed for two classes of applications. The first is attenuator where current consumption is the most important design consideration. The second application is switches where low capacitance is the driving issue for the designer. • 2 Leads Surface Mount Package • Switching - Low Distortion Switching - Low Capacitance • Attenuating - Low Current Attenuating for Less Power Consumption • MSL 1 & Lead Free • Tape and Reel Options Available • Low Failure in Time FIT Rate A SPICE model is not available for PIN diodes as SPICE does not provide for a key PIN diode characteristic -carrier lifetime. Package Marking and Pin Connections cathode C? Anode Note Package marking provides orientation and identification “C” = Device Code “?” = Month code indicates the month of manufacture Table Absolute Maximum Ratings [1] at Tc = +25°C Symbol If PIV Tj Tstg Parameter Forward Current 1 µs Pulse Peak Inverse Voltage Junction Temperature Storage Temperature Thermal Resistance[2] Unit Amp V 0C/W Notes Operation in excess of any one of these conditions may result in permanent damage to the device. Thermal Resistance is measured from junction to board using IR method. Max Rating 1 100 150 -60 to 150 135 Table Electrical Specifications at Tc = +25°C Test Conditions Minimum Breakdown Voltage Typical Total Resistance VBR V RS Ohm VR = VBR Measure IR 10uA IF = 10mA/100mA* f = 100 MHz Typical Total Capacitance CT pF VR = 50V f = 1MHz Table Typical Parameters at Tc = +25°C Series Resistance RS Ohm Test Conditions IF = 1 mA f = 100 MHz Carrier Lifetime ns IF = 50mA IR = 250mA VR = 10V IF = 20mA 90% Recovery Total Capacitance CT pF VR = 50V f = 1MHz Typical Performance Curves at Tc = +25°C Part Number Ordering Information Part number HSMP-386Z-BLKG HSMP-386Z-TR1G No. of Units 100 3000 Container Anti-static bag 7" reel For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright 2006 Avago Technologies Pte. All rights reserved. 5989-4660EN - January 19, 2006

PDF Datasheet Preview

HSMP-386Z General Purpose RF PIN Diodes In Surface Mount SOD-323 Package

Data Sheet

Description/Application

Avago Technologies’s HSMP-386Z is a General Purpose PIN Diode housed in a low cost surface mount SOD323 package. This package offers customers who already use the PIN Diode in SOT-23 and SOT-323 packages, a logical transition to a smaller package outline to accommodate end product design with limited board space.

The HSMP-386Z is designed for two classes of applications. The first is attenuator where current consumption is the most important design consideration. The second application is switches where low capacitance is the driving issue for the designer.
• 2 Leads Surface Mount Package
• Switching
- Low Distortion Switching - Low Capacitance
• Attenuating - Low Current Attenuating for Less Power Consumption
• MSL 1 & Lead Free
• Tape and Reel Options Available
• Low Failure in Time FIT Rate

A SPICE model is not available for PIN diodes as SPICE does not provide for a key PIN diode characteristic -carrier lifetime.

Package Marking and Pin Connections
cathode

C? Anode

Note Package marking provides orientation and identification
“C” = Device Code
“?” = Month code indicates the month of manufacture

Table Absolute Maximum Ratings [1] at Tc = +25°C

Symbol If PIV Tj Tstg

Parameter Forward Current 1 µs Pulse Peak Inverse Voltage Junction Temperature Storage Temperature Thermal Resistance[2]

Unit Amp V 0C/W

Notes Operation in excess of any one of these conditions may result in permanent damage to the device. Thermal Resistance is measured from junction to board using IR method.

Max Rating 1 100 150 -60 to 150 135

Table Electrical Specifications at Tc = +25°C

Test Conditions

Minimum Breakdown Voltage Typical Total Resistance

VBR V

RS Ohm

VR = VBR Measure IR 10uA

IF = 10mA/100mA* f = 100 MHz

Typical Total Capacitance CT pF

VR = 50V f = 1MHz

Table Typical Parameters at Tc = +25°C

Series Resistance RS Ohm

Test Conditions

IF = 1 mA f = 100 MHz

Carrier Lifetime ns

IF = 50mA IR = 250mA

VR = 10V IF = 20mA 90% Recovery

Total Capacitance CT pF

VR = 50V f = 1MHz

Typical Performance Curves at Tc = +25°C
Part Number Ordering Information

Part number HSMP-386Z-BLKG HSMP-386Z-TR1G

No. of Units 100 3000

Container Anti-static bag 7" reel

For product information and a complete list of distributors, please go to our web site:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright 2006 Avago Technologies Pte. All rights reserved. 5989-4660EN - January 19, 2006

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HSMP-386Z-BLKG Datasheet file may be downloaded here without warranties.

Datasheet ID: HSMP-386Z-BLKG 520413