HLMP-ED80-MQT00

HLMP-ED80-MQT00 Datasheet


HLMP-ED80 Radiometrically Tested AlInGaP II LED Lamps for Sensor-Based Applications

Part Datasheet
HLMP-ED80-MQT00 HLMP-ED80-MQT00 HLMP-ED80-MQT00 (pdf)
Related Parts Information
HLMP-ED80-K0T00 HLMP-ED80-K0T00 HLMP-ED80-K0T00
HLMP-ED80-KNT00 HLMP-ED80-KNT00 HLMP-ED80-KNT00
HLMP-ED80-PST00 HLMP-ED80-PST00 HLMP-ED80-PST00
HLMP-ED80-NRT00 HLMP-ED80-NRT00 HLMP-ED80-NRT00
PDF Datasheet Preview
HLMP-ED80 Radiometrically Tested AlInGaP II LED Lamps for Sensor-Based Applications

Data Sheet

Radiometrically Tested Precision Optical AlInGaP II aluminum indium gallium phosphide LEDs offer increased sensor-based application design flexibility. High-resolution radiometric intensity bins mW/sr enable customers to precisely match LED lamp performance with sensor functionality.

Visible LEDs offer new styling alternatives light can be leveraged to develop more attractive products. In comparison to invisible infrared sources, safety concerns are significantly improved by the human autonomic pupil response and reflexive movement away from bright light. Visible LEDs further indidcate system on/off status.

The AlInGaP II technology provides extremely stable light output over very long periods of time, with low power consumption.

These lamps are made with an advanced optical grade epoxy system offering superior high and moisture resistance performance in outdoor systems. The epoxy contains both uv-a and inhibitors to reduce the effects of long term exposure to direct sunlight.

Please contact your Avago Technologies Representative for more information and design for manufacture advice. Application Brief I-024 Pulsed Operating Ranges for AlInGaP LEDs vs. Projected Long Term Light Output Performance and other application information is available at:
•  Characterized by radiometric intensity
•  High optical power output
•  Extremely long useful life
•  Low power consumption
•  Well defined spatial radiation patterns
•  639 nmPEAK red color
•  30° viewing angle
•  High operating temperature
•  Superior resistance to moisture
•  Suitable for outdoor use
•  Photo sensor stimulus
•  Infrared emitter replacement
•  Solid state optical mouse sensors
•  Surface imaging sensors
•  Optical position and motion sensors
•  Human interface devices
•  Computer printer dot quality control
•  Battery powered systems
•  Radiometric LED characterization decreases system variability
•  Improved system reliability
•  Visual styling
•  Visible color for improved application safety
•  On/off indication
•  Suitable for a variety of sensor-based applications

Device Selection Guide

Part Number HLMP-ED80-K0T00 HLMP-ED80-K0000

Minimum Radiometric Intensity mW/Sr at 20 mA

Package Dimensions
± ±
± ±
± ±

MIN.

CATHODE LEAD

MAX.

MAX.

MIN.
± ±

SQ. TYP.

CATHODE FLAT
± ±
± ±

NOTE ALL DIMENSIONS ARE IN mm INCHES .

Maximum Forward Voltage V at 20 mA

Part Numbering System

H L M P - x - x

Mechanical Option 00 Bulk

VF Bin Selections 0 Maximum VF V T Maximum VF V

Maximum Intensity Bin 0 No maximum Iv bin limit

Minimum Intensity Bin Refer to device selection guide

Color D 630 nm red

Package E T-1 3/4 5 mm round lamp

Note Please refer to AB 5337 for complete information on part numbering system.

Absolute Maximum Ratings at TA = 25°C

Notes Derate linearly as shown in Figure For long term performance with minimal light output degradation, drive currents between
More datasheets: CDB2011-1 | DM74ALS5245N | DM74ALS5245WM | DM74ALS5245SJX | DM74ALS5245SJ | DM74ALS5245WMX | HLMP-ED80-K0T00 | HLMP-ED80-KNT00 | HLMP-ED80-PST00 | HLMP-ED80-NRT00


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HLMP-ED80-MQT00 Datasheet file may be downloaded here without warranties.

Datasheet ID: HLMP-ED80-MQT00 520358