HLMT-QH00-WX000
HLMT-QH00-WX000 Datasheet
HLMA-Qx00, HLMA-Px00 HLMT-Px00 and HLMT-Qx00 Subminiature High Performance AlInGaP LED Lamps
| Part | Datasheet |
|---|---|
HLMT-QH00-WX000 |
HLMT-QH00-WX000 (pdf) |
| PDF Datasheet Preview |
|---|
| HLMA-Qx00, HLMA-Px00 HLMT-Px00 and HLMT-Qx00 Subminiature High Performance AlInGaP LED Lamps Data Sheet SunPower Series HLMA-PF00, HLMA-PG00, HLMA-PH00, HLMA-PL00, HLMA-QF00, HLMA-QG00, HLMA-QH00, HLMA-QL00, HLMT-PG00, HLMT-PH00, HLMT-PL00, HLMT-QG00, HLMT-QH00, HLMT-QL00 Flat Top Package The HLMX-PXXX flat top lamps use an untinted, nondiffused, truncated lens to provide a wide radiation pattern that is necessary for use in backlighting applications. The flat top lamps are also ideal for use as emitters in light pipe applications. Dome Packages The HLMX-QXXX dome lamps use an untinted, nondiffused lens to provide a high luminous intensity within a narrow radiation pattern. Lead Configurations All of these devices are made by encapsulating LED chips on axial lead frames to form molded epoxy subminiature lamp packages. A variety of package configuration options is available. These include special surface mount lead configurations, gull wing, yoke lead, or Z-bend. Right angle lead bends at mm inch and mm inch center spacing are available for through hole mounting. For more information refer to Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps data sheet. • Subminiature flat top package Ideal for backlighting and light piping applications • Subminiature dome package Nondiffused dome for high brightness • Wide range of drive currents • Colors 590 nm Amber, 605 nm Orange, 615 nm Red- dish-Orange, 622/626 nm Red, and 635 nm Red • Ideal for space limited applications • Axial leads • Available with lead configurations for surface mount and through hole PC board mounting Technology These subminiature solid state lamps utilize one of the two newly developed aluminum indium gallium phosphide AlInGaP LED technologies. The HLMT-Devices are especially effective in very bright ambient lighting conditions. The colors 590 nm amber, 605 nm orange, 615 nm reddish-orange, 622/626 nm red, and 635 nm red are available with viewing angles of 15° for the domed devices and 125° for the flat top devices. Device Selection Guide Part Number nm HLMA-QL00 HLMT-QL00 HLMA-QJ00 HLMA-QH00 615 HLMT-QH00 615 HLMA-QG00 626 HLMT-QG00 HLMA-QF00 HLMA-PL00 HLMT-PL00 HLMA-PJ00 HLMA-PH00 HLMT-PH00 HLMA-PG00 HLMT-PG00 HLMA-PF00 Typ. IV mcd 500 1000 500 800 500 1000 500 75 150 75 120 75 150 75 Package Description Domed, Nondiffused, Untinted Viewing Angle 15° Flat Top, 125° Nondiffused, Untinted |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HLMT-QH00-WX000 Datasheet file may be downloaded here without warranties.