HFBR-2528

HFBR-2528 Datasheet

HFBR-0508 Series HFBR-1528 Transmitter HFBR-2528 Receiver 10 Megabaud Versatile Link Fiber Optic Transmitter and Receiver for 1 mm POF and 200 µm

Part	Datasheet
HFBR-2528	HFBR-2528 (pdf)

Related Parts	Information
HFBR-1528	HFBR-1528

PDF Datasheet Preview
HFBR-0508 Series HFBR-1528 Transmitter HFBR-2528 Receiver 10 Megabaud Versatile Link Fiber Optic Transmitter and Receiver for 1 mm POF and 200 µm Data Sheet The HFBR-0508 Series consists of a fiber-optic transmitter and receiver operating at a 650 nm wavelength red . The HFBR-1528 transmitter is an LED in a low cost plastic housing designed to efficiently couple power into 200 µm diameter HCS and diameter POF. The HFBR-2528 receiver porates a PIN and digital output IC with CMOS and TTL logic families. HFBR-0508 links operate from DC to 10 MBd at distances up to 50 meters with POF and up to 500 meters with 200 µm No minimum link distances are required when using circuits, simplifying design. Versatile Link components can be interlocked Nplexed together to minimize space and to provide dual with the duplex connectors. Up to eight packages can be interlocked and inserted into a printed circuit board. POF and HCS are available in pre-connectored lengths or can be easily field-terminated. A single transmitter drive current for POF and HCS allows both fibers to be used with a single design. • Data transmission at signal rates of dc to 10 MBd • Up to 50 meters distances with 1 mm Plastic Optical Fiber POF • Up to 500 meters distances with 200 µm Hard Clad Silica • Wide dynamic range receiver allows operation from zero to maximum link distance with a single transmitter drive current • Link distances specified for variations in temperature, power supply, and fiber attenuation • DC coupled receiver with CMOS/TTL output for easy designs no data encoding or digitizing circuitry required • Pulse width distortion controlled to limit distortion from low duty cycle or burst mode data • High noise immunity • Compatible with Avago’s Versatile Link family of connectors, for easy termination of fiber • Industrial control and factory automation • Serial field buses • Intra-system links Board-to-Board, Rack-to-Rack • Extension of RS-232, RS-485 • Elimination of ground loops • High voltage isolation • Reduces voltage transient susceptibility is a registered trademark of SpecTran Corporation. CAUTION:. It is advised that normal static precautions be taken in handling and assembly of these components to prevent damage and/or degradation which may be induced by ESD. HFBR-0508 Series 10 MBd Data Link Typical Link Performance, TA = +25°C Parameter Signaling Rate Link Distance with Extra Low Loss POF Cable Link Distance with 200 µm HCS Cable Typ.[1] 15 100 900 Unit Condition Mb/s NRZ m 10 MBd m 10 MBd Specified Link Performance, TA = -40° to +85°C, DC to 10 MBd, unless otherwise noted. Parameter Min. Max. Unit Condition Signaling Rate Link Distance with Extra Low 10 Mb/s NRZ m +25°C Loss POF Cable 40 0 to +70°C 30 -40 to +85°C Link Distance with 200 µm HCS Cable m +25°C 300 0 to +70°C 100 -40 to +85°C Pulse Width Distortion ns 25 75% Duty Cycle ns Arbitrary Duty Cycle Note 2 2, 3, 5 2, 4, 5 Note 2

PDF Datasheet Preview

HFBR-0508 Series HFBR-1528 Transmitter HFBR-2528 Receiver 10 Megabaud Versatile Link Fiber Optic Transmitter and Receiver for 1 mm POF and 200 µm

Data Sheet

The HFBR-0508 Series consists of a fiber-optic transmitter and receiver operating at a 650 nm wavelength red . The HFBR-1528 transmitter is an LED in a low cost plastic housing designed to efficiently couple power into 200 µm diameter HCS and diameter POF. The HFBR-2528 receiver porates a PIN and digital output IC with CMOS and TTL logic families.

HFBR-0508 links operate from DC to 10 MBd at distances up to 50 meters with POF and up to 500 meters with 200 µm No minimum link distances are required when using circuits, simplifying design.

Versatile Link components can be interlocked Nplexed together to minimize space and to provide dual with the duplex connectors. Up to eight packages can be interlocked and inserted into a printed circuit board.

POF and HCS are available in pre-connectored lengths or can be easily field-terminated. A single transmitter drive current for POF and HCS allows both fibers to be used with a single design.
• Data transmission at signal rates of dc to 10 MBd
• Up to 50 meters distances with 1 mm Plastic Optical

Fiber POF
• Up to 500 meters distances with 200 µm Hard Clad Silica
• Wide dynamic range receiver allows operation from zero
to maximum link distance with a single transmitter drive current
• Link distances specified for variations in temperature, power supply, and fiber attenuation
• DC coupled receiver with CMOS/TTL output for easy designs no data encoding or digitizing circuitry required
• Pulse width distortion controlled to limit distortion from low duty cycle or burst mode data
• High noise immunity
• Compatible with Avago’s Versatile Link family of connectors, for easy termination of fiber
• Industrial control and factory automation
• Serial field buses
• Intra-system links Board-to-Board, Rack-to-Rack
• Extension of RS-232, RS-485
• Elimination of ground loops
• High voltage isolation
• Reduces voltage transient susceptibility
is a registered trademark of SpecTran Corporation.

CAUTION:. It is advised that normal static precautions be taken in handling and assembly of these components to prevent damage and/or degradation which may be induced by ESD.

HFBR-0508 Series 10 MBd Data Link

Typical Link Performance, TA = +25°C Parameter

Signaling Rate

Link Distance with Extra Low Loss POF Cable

Link Distance with 200 µm HCS Cable

Typ.[1] 15 100 900

Unit Condition Mb/s NRZ
m 10 MBd m 10 MBd

Specified Link Performance, TA = -40° to +85°C, DC to 10 MBd, unless otherwise noted.
Parameter

Min. Max. Unit Condition

Signaling Rate

Link Distance with Extra Low
10 Mb/s NRZ
m +25°C

Loss POF Cable
40 0 to +70°C
30 -40 to +85°C

Link Distance with 200 µm HCS Cable
m +25°C
300 0 to +70°C
100 -40 to +85°C

Pulse Width Distortion
ns 25 75% Duty Cycle
ns Arbitrary Duty Cycle

Note 2
2, 3, 5 2, 4, 5

Note 2

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HFBR-2528 Datasheet file may be downloaded here without warranties.

Datasheet ID: HFBR-2528 520298