HDSP-563C

HDSP-563C Datasheet

HDSP-56xC Series 13 mm Slim Font Seven Segment Displays

Part	Datasheet
HDSP-563C	HDSP-563C (pdf)

Related Parts	Information
HDSP-561C	HDSP-561C

PDF Datasheet Preview
HDSP-56xC Series 13 mm Slim Font Seven Segment Displays Data Sheet Description The Slim Font Seven Segment Displays incorporates a new slim font character design. This slim font features narrow width, specially mitered segments to give fuller appearance to the illuminated character. Faces of these displays are painted a neutral gray for enhanced on/off contrast. All devices are available in either common anode or common cathode configuration with right hand decimal point. • As AlInGaP red color • Gray Face Paint Gray package gives optimum contrast • Design flexibility Common anode or common cathode • Excellent appearance • Slim font design • Mitered corners, evenly illuminated segments Devices As AlInGaP Red HDSP-561C HDSP-563C Description Common Anode Common Cathode Part Numbering System 5082 -X-X HDSP-X-X Mechanical Options[1] 00 No Mechanical Option Color Bin Options[1,2] 0 No Color Bin Limitation Maximum Intensity Bin[1,2] 0 No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0 No Minimum Intensity Bin Limitation Device Configuration/Color[1] C AlInGaP Red Device Specific Configuration[1] Refer to Respective Datasheet Package[1] Refer to Respective Datasheet Notes For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube exceptions may apply . Please refer to respective datasheet for specific bin limit information. Package Dimensions and Internal Circuit 45° 10° ± TYP. ± TYP. ± TYP. 10 9 8 7 6 a 1 23 45 ALL DIMENSIONS ARE IN MILLIMETERS INCHES . UNLESS OTHERWISE STATED, TOLERANCES ARE ± MM. Function Common A/C Common A/C Absolute Maximum Ratings at TA = Symbol IF IPEAK IAVE VR TO TS Temperature Time HDSP-561C/563C 50 100 30 5 to +105 to +120 250 3 Units mA V s Notes Derate linearly as shown in Figure For long term performance with minimal light output degradation, drive currents between 10 mA and 30 mA are recommended. For more information on recommended drive conditions, please refer to Application Brief I-024 5966-3087E . Operating at currents below 1 mA is not recommended. Please contact your local representative for further information. Optical/Electrical Characteristics at TA =

PDF Datasheet Preview

HDSP-56xC Series 13 mm Slim Font Seven Segment Displays

Data Sheet

Description The Slim Font Seven Segment Displays incorporates a new slim font character design. This slim font features narrow width, specially mitered segments to give fuller appearance to the illuminated character. Faces of these displays are painted a neutral gray for enhanced on/off contrast.

All devices are available in either common anode or common cathode configuration with right hand decimal point.
• As AlInGaP red color
• Gray Face Paint

Gray package gives optimum contrast
• Design flexibility

Common anode or common cathode
• Excellent appearance
• Slim font design
• Mitered corners, evenly illuminated segments

Devices

As AlInGaP Red HDSP-561C HDSP-563C

Description Common Anode Common Cathode

Part Numbering System
5082 -X-X HDSP-X-X

Mechanical Options[1] 00 No Mechanical Option

Color Bin Options[1,2] 0 No Color Bin Limitation

Maximum Intensity Bin[1,2] 0 No Maximum Intensity Bin Limitation

Minimum Intensity Bin[1,2] 0 No Minimum Intensity Bin Limitation

Device Configuration/Color[1] C AlInGaP Red

Device Specific Configuration[1] Refer to Respective Datasheet

Package[1] Refer to Respective Datasheet

Notes For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest

Avago representative for details. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1
bin per tube exceptions may apply . Please refer to respective datasheet for specific bin limit information.

Package Dimensions and Internal Circuit
45°
10°
± TYP.
± TYP.
± TYP.
10 9 8 7 6 a
1 23 45

ALL DIMENSIONS ARE IN MILLIMETERS INCHES . UNLESS OTHERWISE STATED, TOLERANCES ARE ± MM.

Function

Common A/C

Common A/C

Absolute Maximum Ratings at TA =

Symbol IF IPEAK IAVE VR TO TS Temperature Time

HDSP-561C/563C 50 100 30 5 to +105 to +120 250 3

Units mA V s

Notes Derate linearly as shown in Figure For long term performance with minimal light output degradation, drive currents between 10 mA and 30 mA are recommended. For more
information on recommended drive conditions, please refer to Application Brief I-024 5966-3087E . Operating at currents below 1 mA is not recommended. Please contact your local representative for further information.

Optical/Electrical Characteristics at TA =

More datasheets: 208487048001025 | 108487048001053 | 108487064001025 | 108487048001050 | 108487048001049 | 108487048001029 | 108487048001026 | 108487048001025 | 108487064001049 | HDSP-561C

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HDSP-563C Datasheet file may be downloaded here without warranties.

Datasheet ID: HDSP-563C 520276