ASMT-QGBE-NGJ0E

ASMT-QGBE-NGJ0E Datasheet

ASMT-QxBE-Nxxxx Super 0.5W Power PLCC-4 Surface Mount LED Indicator

Part	Datasheet
ASMT-QGBE-NGJ0E	ASMT-QGBE-NGJ0E (pdf)

PDF Datasheet Preview
ASMT-QxBE-Nxxxx Super 0.5W Power PLCC-4 Surface Mount LED Indicator Data Sheet The Super 0.5W Power PLCC-4 SMT LED is first Blue & Green mid-Power PLCC-4 SMT LEDs using InGaN chip technology. The package can be driven at high current due to its superior package design. The product is able to dissipate the heat more efficiently compared to the Power PLCC-4 SMT LEDs. These LEDs produce higher light output with better flux performance compared to the Power PLCC-4 SMT LED. The Super 0.5W Power PLCC-4 SMT LEDs are designed for higher reliability, better performance, and operate under a wide range of environmental conditions. The performance characteristics of these new mid-power LEDs make them uniquely suitable for use in harsh conditions such as in automotive applications, and in electronics signs and signals. To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel is shipped in single intensity and color bin, to provide close uniformity. • Industry Standard PLCC 4 platform 3.2x2.8x1.9mm • High reliability package with enhanced silicone resin encapsulation • High brightness with optimum flux performance using InGaN chip technologies • Available in Blue and Green color • Available in 8mm carrier tape & 7 inch reel • Low Thermal Resistance 40°C/W • Super wide viewing angle at 120 degree • JEDEC MSL 2a Electronic signs and signals a. Decorative/Advertising Lighting b. Channel Lettering c. Signs Luminaire d. RGB Backlighting CAUTION ASMT-QXBE-Nxxxx LEDs are ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details. TYP. Package Drawing ± ± TYP. CATHODE MARKING Notes All dimensions in millimeters Lead polarity as shown in figure Terminal finish Ag plating. Encapsulation material silicone resin. Figure Package Drawing Table Device Selection Guide Luminous Flux, lm Color Min. Flux lm Typ. Flux lm Max. Flux lm Test Current mA Dice Technology Blue ASMT-QBBE-N0B0E InGaN Green ASMT-QGBE-NFH0E InGaN Green ASMT-QGBE-NGJ0E InGaN Notes is the total luminous flux output as measured with an integrating sphere at mono pulse conditions. Tolerance = ±12% Part Numbering System 2X 3X 4X 5 Packaging Option Colour Bin Selection Max. Flux Bin Selection Min. Flux Bin Selection Color B - Blue G - Green Table Absolute Maximum Ratings TA = 25 °C Parameters DC Forward Current [1] Peak Forward Current [2] Power Dissipation ASMT-QWBE-Nxxxx 150 mA 300 mA 513 mW Junction Temperature 125 °C

PDF Datasheet Preview

ASMT-QxBE-Nxxxx Super 0.5W Power PLCC-4 Surface Mount LED Indicator

Data Sheet

The Super 0.5W Power PLCC-4 SMT LED is first Blue & Green mid-Power PLCC-4 SMT LEDs using InGaN chip technology. The package can be driven at high current due to its superior package design. The product is able to dissipate the heat more efficiently compared to the Power PLCC-4 SMT LEDs. These LEDs produce higher light output with better flux performance compared to the Power PLCC-4 SMT LED.

The Super 0.5W Power PLCC-4 SMT LEDs are designed for higher reliability, better performance, and operate under a wide range of environmental conditions. The performance characteristics of these new mid-power LEDs make them uniquely suitable for use in harsh conditions such as in automotive applications, and in electronics signs and signals.

To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel is shipped in single intensity and color bin, to provide close uniformity.
• Industry Standard PLCC 4 platform 3.2x2.8x1.9mm
• High reliability package with enhanced silicone resin
encapsulation
• High brightness with optimum flux performance
using InGaN chip technologies
• Available in Blue and Green color
• Available in 8mm carrier tape & 7 inch reel
• Low Thermal Resistance 40°C/W
• Super wide viewing angle at 120 degree
• JEDEC MSL 2a

Electronic signs and signals a. Decorative/Advertising Lighting b. Channel Lettering c. Signs Luminaire d. RGB Backlighting

CAUTION ASMT-QXBE-Nxxxx LEDs are ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details.

TYP.

Package Drawing
± ±

TYP.

CATHODE

MARKING

Notes All dimensions in millimeters Lead polarity as shown in figure Terminal finish Ag plating. Encapsulation material silicone resin.

Figure Package Drawing

Table Device Selection Guide

Luminous Flux, lm

Color

Min. Flux lm Typ. Flux lm Max. Flux lm Test Current mA Dice Technology

Blue

ASMT-QBBE-N0B0E

InGaN

Green

ASMT-QGBE-NFH0E

InGaN

Green

ASMT-QGBE-NGJ0E

InGaN

Notes is the total luminous flux output as measured with an integrating sphere at mono pulse conditions. Tolerance = ±12%

Part Numbering System
2X 3X 4X 5

Packaging Option Colour Bin Selection Max. Flux Bin Selection Min. Flux Bin Selection Color

B - Blue G - Green

Table Absolute Maximum Ratings TA = 25 °C

Parameters DC Forward Current [1] Peak Forward Current [2] Power Dissipation

ASMT-QWBE-Nxxxx 150 mA 300 mA 513 mW

Junction Temperature
125 °C

More datasheets: B82467G501M | B82467G222M | B82467G223M | B82467G472M | SMP4-BC-YG | B78477P1011A44 | B78477P1010A344 | DFR0306 | 240-005 | 7550-ID/UR

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ASMT-QGBE-NGJ0E Datasheet file may be downloaded here without warranties.

Datasheet ID: ASMT-QGBE-NGJ0E 520156