ASMT-QYBC-NGJ0E

ASMT-QYBC-NGJ0E Datasheet


ASMT-QxBC-Nxxxx Super 0.5W Power PLCC-4 Surface Mount LED Indicator

Part Datasheet
ASMT-QYBC-NGJ0E ASMT-QYBC-NGJ0E ASMT-QYBC-NGJ0E (pdf)
Related Parts Information
ASMT-QBBC-NAC0E ASMT-QBBC-NAC0E ASMT-QBBC-NAC0E
PDF Datasheet Preview
ASMT-QxBC-Nxxxx Super 0.5W Power PLCC-4 Surface Mount LED Indicator

Data Sheet

The Super 0.5W Power PLCC-4 SMT LED is Blue mid-Power PLCC-4 SMT LEDs using InGaN chip technology. The package can be driven at high current due to its superior package design. The product is able to dissipate the heat more compared to the Power PLCC-4 SMT LEDs. These LEDs produce higher light output with better performance compared to the Power PLCC-4 SMT LED.

The Super 0.5W Power PLCC-4 SMT LEDs are designed for higher reliability, better performance, and operate under a wide range of environmental conditions. The performance characteristics of these new mid-power LEDs make them uniquely suitable for use in harsh conditions such as in automotive applications, and in electronics signs and signals.

To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel is shipped in single intensity and color bin, to provide close uniformity.
x Industry Standard PLCC 4 platform 3.2x2.8x1.9mm x High reliability package with enhanced silicone resin
encapsulation x High brightness with optimum performance using

InGaN chip technologies x Available in Blue color x Available in 8mm carrier tape & 7 inch reel x Low Thermal Resistance 40°C/W x Wide viewing angle at 120 degree x JEDEC MSL 2

Electronic signs and signals a. Decorative/Advertising Lighting b. Channel Lettering c. Signs Luminaire d. RGB Backlighting

CAUTION ASMT-QxBC-Nxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details.

TYP.

Package Drawing
± ±

TYP.

CATHODE

MARKING

Notes All Dimensions in millimeters. Lead Polarity as shown in Figure Terminal Finish Ag plating Encapsulation material Silicone resin

Figure Package Drawing

Table Device Selection Guide TJ = 25°C

Luminous Flux, V[1] lm

Color

Min. Flux lm

Typ. Flux lm

Max. Flux lm

Test Current mA

Blue

ASMT-QBBC-NACxE

Notes V is the total luminous output as measured with an integrating sphere at mono pulse conditions. Tolerance = ±12%

Dice Technology InGaN

Part Numbering System

ASMT- Q X1 B C N X2 X3 X4 X5

Packaging Option Color Bin Selection Max. Flux Bin Selection Min. Flux Bin Selection Color B Blue

Table Absolute Maximum Ratings TA = 25°C

Parameters

ASMT-QxBC-Nxxxx

DC Forward Current [1]
150 mA

Peak Forward Current [2]
300 mA

Power Dissipation
570 mW
More datasheets: 74AC163SC | 74AC163MTCX | 74AC163MTC | 74AC163SJX | 74ACT163MTCX | 74ACT163PC | AS35 1R040 | B39182B7714C610 | CDBP0130R-G | ASMT-QBBC-NAC0E


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ASMT-QYBC-NGJ0E Datasheet file may be downloaded here without warranties.

Datasheet ID: ASMT-QYBC-NGJ0E 520155