APDS-9004-020

APDS-9004-020 Datasheet


APDS-9004 Miniature Surface-Mount Ambient Light Photo Sensor

Part Datasheet
APDS-9004-020 APDS-9004-020 APDS-9004-020 (pdf)
PDF Datasheet Preview
APDS-9004 Miniature Surface-Mount Ambient Light Photo Sensor

Data Sheet

The APDS-9004 is ideal for applications in which the measurement of ambient light is used to control display backlighting. Mobile appliances such as the mobile phones and PDAs that draw heavy current from display backlighting will benefit from incorporating these photo sensor products in their designs by reducing power consumption significantly.

Height 1.10mm Width 3.20mm Depth 1.60mm
• Good output linearity across wide illumination range
• Low sensitivity variation across various light sources
• Operating temperature -40°C to 85°C
• Vcc supply to 5.5V
• Lead-free package, RoHS compliance.
• Detection of ambient light to control display backlighting
- Mobile devices Mobile phones, PDAs - Computing devices Notebooks, Webpads - Consumer devices TVs, Video Cameras, Digital

Still Cameras
• Automatic Residential and Commercial Lighting

Management
• Electronic Signs and Signals

CAUTION It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.

Application Support Information

The Application Engineering Group is available to assist you with the application design associated with APDS9004 ambient light photo sensor module. You can contact them through your local sales representatives for additional details.
Ordering Information

Part Number APDS-9004-020

Packaging Type Tape and Reel

Package 4-pins Chipled package

Typical Application Circuit

Pin 3:V CC

Pin 2:V CC

APDS-9004 Block Diagram

Quantity 2500

APDS -9004

Pin 1:OUT

Pin 4:NC

R LOAD

Figure Typical application circuit for APDS-9004

Figure 1 Table Component

RLOAD

Recommended Application Circuit Component
1k ohm

I/O Pins Configuration Table

Description OUT VCC No Connect

Notes PIN 2 and PIN 3 Vcc need to be externally shorted. Figure Relative Spectral Response Vs. Wavelength

Relative Spectral Response Vs. Wavelength

Relative Spectral Response Vs Wavelength

APDS-9004

Relative Spectral Response
1150

Wavelength nm

Absolute Maximum Ratings

For implementations where case to ambient thermal resistance is 50 °C /W

Parameter Storage Temperature Operating Temperature Supply Voltage

Symbol TS TA VCC

Min. -40 -40 0

Max. 85

Recommended Operating Conditions

Parameter Supply Voltage

Symbol VCC

Min.

Max.

Units °C °C V

Units V

Electrical & Optical Specifications Ta=25°C
More datasheets: IAC15 | M-IAC15 | IAC15A | X4IAC5A | X4IAC5 | X4IAC24A | X4IAC24 | X4IAC15A | M-IAC5E | M-IAC15A


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived APDS-9004-020 Datasheet file may be downloaded here without warranties.

Datasheet ID: APDS-9004-020 520120