AMMC-6440-W50

AMMC-6440-W50 Datasheet

AMMC-6440 37 - 42 GHz Power

Part	Datasheet
AMMC-6440-W50	AMMC-6440-W50 (pdf)

Related Parts	Information
AMMC-6440-W10	AMMC-6440-W10

PDF Datasheet Preview
AMMC-6440 37 - 42 GHz Power Data Sheet Chip Size 2500 x 1750 um 100 x 69 mils Chip Size Tolerance ± 10 um mils Chip Thickness 100 ± 10 um 4 ± mils Pad Dimensions 100 x 100 um 4 ± mils The AMMC-6440 MMIC is a broadband 1W power designed for use in transmitters that operate in various frequency bands between 37GHz and 42GHz. This MMIC optimized for linear operation with an output third order intercept point OIP3 of 38dBm. At 42GHz it provides 28dBm of output power P-1dB and 14dB of gain. The device has input and output matching circuitry for use in 50 Ω environments. The AMMC-6440 also integrates a temperature compensated RF power detection circuit that enables power detection of 0.25V/W. DC bias is simple and the device operates on widely available 5.5V for current supply negative voltage only needed for Vg . It is fabricated in a PHEMT process for exceptional power and gain performance. For improved reliability and moisture protection, the die is passivated at the active areas. x Wide frequency range 37 - 42 GHz x High gain 14 dB x Power GHz, P-1dB=28 dBm x Highly linear OIP3=39dBm x Integrated RF power detector x Volt, Volt, 950mA operation x Microwave Radio systems x LMDS & Pt-Pt mmW Long Haul x & WiMax BWA x WLL and MMDS loops x Can be driven by AMMC-6345, increasing overall gain Note These devices are ESD sensitive. The following precautions are strongly recommended. Ensure that an ESD approved carrier is used when dice are transported from one destination to another. Personal grounding is to be worn at all times when handling these devices Absolute Maximum Ratings [AMMC-6440] Symbols Parameters Units Min. Max. Notes Vd-Vg Drain to Gate Voltage Positive Supply Voltage Gate Supply Voltage Drain Current Power Dissipation CW Input Power Operating Channel Temp +150 Tstg Storage Case Temp. -65 to +155 Tmax Maximum Assembly Temp 30 sec max +320 Notes Operation in excess of any one of these conditions may result in permanent damage to this device. Functional operation at or near these limitations will reduce the lifetime of the device. Dissipated power PD is in any combination of DC voltage, Drain Current, input power and power delivered to the load. When operated at maximum PD with a base plate temperature of 85 qC, the median time to failure MTTF is reduced. These ratings apply to each individual FET. The operating channel temperature will directly the device MTTF. For maximum life, it is recommended that junction temperatures Tj be maintained at the lowest possible levels. See MTTF vs. Channel temperature Table AMMC-6440 DC Properties [1] Parameters and Test Conditions Units Min. Typ. Max. Drain Supply Current under any RF power drive and temperature Ordering Information: AMMC-6440-W10 = 10 devices per tray AMMC-6440-W50 = 50 devices per tray For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2009 Avago Technologies. All rights reserved. Obsoletes 5989-3941EN AV02-1284EN - November 12, 2009

PDF Datasheet Preview

AMMC-6440 37 - 42 GHz Power

Data Sheet

Chip Size 2500 x 1750 um 100 x 69 mils Chip Size Tolerance ± 10 um mils Chip Thickness 100 ± 10 um 4 ± mils Pad Dimensions 100 x 100 um 4 ± mils

The AMMC-6440 MMIC is a broadband 1W power designed for use in transmitters that operate in various frequency bands between 37GHz and 42GHz. This MMIC optimized for linear operation with an output third order intercept point OIP3 of 38dBm. At 42GHz it provides 28dBm of output power P-1dB and 14dB of gain. The device has input and output matching circuitry for use in 50 Ω environments. The AMMC-6440 also integrates a temperature compensated RF power detection circuit that enables power detection of 0.25V/W. DC bias is simple and the device operates on widely available 5.5V for current supply negative voltage only needed for Vg . It is fabricated in a PHEMT process for exceptional power and gain performance. For improved reliability and moisture protection, the die is passivated at the active areas.
x Wide frequency range 37 - 42 GHz x High gain 14 dB x Power GHz, P-1dB=28 dBm x Highly linear OIP3=39dBm x Integrated RF power detector x Volt, Volt, 950mA operation
x Microwave Radio systems x LMDS & Pt-Pt mmW Long Haul x & WiMax BWA x WLL and MMDS loops x Can be driven by AMMC-6345, increasing overall
gain

Note These devices are ESD sensitive. The following precautions are strongly recommended. Ensure that an ESD approved carrier is used when dice are transported from one destination to another. Personal grounding is to be worn at all times when handling these devices

Absolute Maximum Ratings [AMMC-6440]

Symbols

Parameters

Units

Min.

Max.

Notes

Vd-Vg

Drain to Gate Voltage

Positive Supply Voltage

Gate Supply Voltage

Drain Current

Power Dissipation

CW Input Power

Operating Channel Temp
+150

Tstg

Storage Case Temp.
-65 to +155

Tmax

Maximum Assembly Temp 30 sec max
+320

Notes Operation in excess of any one of these conditions may result in permanent damage to this device. Functional operation at or near these
limitations will reduce the lifetime of the device. Dissipated power PD is in any combination of DC voltage, Drain Current, input power and power delivered to the load. When operated at maximum PD with a base plate temperature of 85 qC, the median time to failure MTTF is reduced. These ratings apply to each individual FET. The operating channel temperature will directly the device MTTF.

For maximum life, it is recommended that junction temperatures Tj be maintained at the lowest possible levels. See MTTF vs. Channel temperature Table

AMMC-6440 DC Properties [1]

Parameters and Test Conditions

Units

Min.

Typ.

Max.

Drain Supply Current
under any RF power drive and temperature
Ordering Information:

AMMC-6440-W10 = 10 devices per tray AMMC-6440-W50 = 50 devices per tray

For product information and a complete list of distributors, please go to our web site:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2009 Avago Technologies. All rights reserved. Obsoletes 5989-3941EN AV02-1284EN - November 12, 2009

More datasheets: B32924F3565K | B32924E3685M | B32924F3685K | B32924E3825M | B32926E3225K | B32923E3225M189 | B32924E3225M189 | ACW025 | DRI0009 | XR21V1414IM-0B-EB

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AMMC-6440-W50 Datasheet file may be downloaded here without warranties.

Datasheet ID: AMMC-6440-W50 520113