AMMC-3041-W10

AMMC-3041-W10 Datasheet

AMMC-3041 18 - 42 GHz Double Balanced Mixer

Part	Datasheet
AMMC-3041-W10	AMMC-3041-W10 (pdf)

Related Parts	Information
AMMC-3041-W50	AMMC-3041-W50

PDF Datasheet Preview
AMMC-3041 18 - 42 GHz Double Balanced Mixer Data Sheet Chip Size Tolerance ±10 µm mils Chip Size Tolerance 10 µm mils Chip Thickness 100 ± 10 µm 4 ± mils Pad Dimensions 75 x 75 µm 3 ± mils The AMMC-3041 is a monolithic double balanced mixer designed for commercial communication systems. The AMMC- 3041 mixer is fabricated using a suspended metal system to create a unique, broadside-coupled balun structure patent pending to achieve exceptional bandwidth. The broadband performance of the AMMC-3041 can be used to advantage by replacing conventional, narrow band mixers with a single device. For improved reliability and moisture protection, the die is passivated at the active areas. • Wide Frequency Range - RF, LO 18 - 42 GHz - IF DC - 5 GHz • Conversion Loss dB • High IIP3 +22 dBm • High Input P-1dB +16 dBm • Up or Down Conversion AMMC-3041 Absolute Maximum Ratings[1] Symbol Parameters/Conditions Units Min. Max. Operating Backside Temp. °C -55 +140 Tstg Storage Temp. °C -65 +165 Tmax Maximum Assembly Temp. 60 sec. max. +300 • Point-to-Point Radio • LMDS • SATCOM Note Operation in excess of any one of these conditions may result in permanent damage to this device. Note These devices are ESD sensitive. The following precautions are strongly recommended Ensure that an ESD approved carrier is used when dice are transported from one destination to another. Personal grounding is to be worn at all times when handling these devices. AMMC-3041 RF Specifications[1] Zo = 50 Tb = 25°C, IF = 2 GHz, LO Input Power = +14 dBm, RF Input Power = -20 dBm, except as noted. Symbol Lc IIP3 P-1dB ISOLL-R Parameters Conversion Loss[1] Input 3rd Order Intercept Point, Down Conversion[2] Input Power at 1 dB Conversion Loss Compression LO - RF Isolation Test Conditions Down Conversion Up Conversion fRF = 26 GHz fRF = 38 GHz Down Conversion Up Conversion fLO = 26 GHz fLO = 38 GHz Notes 100% on-wafer RF test is done at RF frequency = 18, 22, 32, and 42 GHz. = 2 MHz, RF Input Power = -10 dBm. Units dB dBm dBm dB Minimum Typical 23 22 44 29 Maximum Spurious Mixing Products fRF = 31 GHz, RF Input Power = -10 dBm, fLO = 32 GHz, LO Input Power = +14 dBm. m x RF 0 Ordering Information: AMMC-3041-W10 = 10 devices per tray AMMC-3041-W50 = 50 devices per tray For product information and a complete list of distributors, please go to our website: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright 2007 Avago Technologies Limited. All rights reserved. 5989-3933EN March 29, 2007

PDF Datasheet Preview

AMMC-3041 18 - 42 GHz Double Balanced Mixer

Data Sheet

Chip Size Tolerance ±10 µm mils Chip Size Tolerance 10 µm mils Chip Thickness 100 ± 10 µm 4 ± mils Pad Dimensions 75 x 75 µm 3 ± mils

The AMMC-3041 is a monolithic double balanced mixer designed for commercial communication systems. The AMMC- 3041 mixer is fabricated using a suspended metal system to create a unique, broadside-coupled balun structure patent pending to achieve exceptional bandwidth. The broadband performance of the AMMC-3041 can be used to advantage by replacing conventional, narrow band mixers with a single device. For improved reliability and moisture protection, the die is passivated at the active areas.
• Wide Frequency Range - RF, LO 18 - 42 GHz - IF DC - 5 GHz
• Conversion Loss dB
• High IIP3 +22 dBm
• High Input P-1dB +16 dBm
• Up or Down Conversion

AMMC-3041 Absolute Maximum Ratings[1]

Symbol Parameters/Conditions Units Min. Max.

Operating Backside Temp. °C -55 +140

Tstg

Storage Temp.
°C -65 +165

Tmax Maximum Assembly

Temp. 60 sec. max.
+300
• Point-to-Point Radio
• LMDS
• SATCOM

Note Operation in excess of any one of these conditions may result in
permanent damage to this device.

Note These devices are ESD sensitive. The following precautions are strongly recommended Ensure that an ESD approved carrier is used when dice are transported from one destination to another. Personal grounding is to be worn at all times when handling these devices.

AMMC-3041 RF Specifications[1]

Zo = 50 Tb = 25°C, IF = 2 GHz, LO Input Power = +14 dBm, RF Input Power = -20 dBm, except as noted.

Symbol Lc IIP3 P-1dB ISOLL-R

Parameters Conversion Loss[1]

Input 3rd Order Intercept Point, Down Conversion[2] Input Power at 1 dB Conversion Loss Compression LO - RF Isolation

Test Conditions

Down Conversion Up Conversion
fRF = 26 GHz fRF = 38 GHz

Down Conversion Up Conversion
fLO = 26 GHz fLO = 38 GHz

Notes 100% on-wafer RF test is done at RF frequency = 18, 22, 32, and 42 GHz. = 2 MHz, RF Input Power = -10 dBm.

Units
dB dBm
dBm dB

Minimum

Typical
23 22
44 29

Maximum

Spurious Mixing Products
fRF = 31 GHz, RF Input Power = -10 dBm, fLO = 32 GHz, LO Input Power = +14 dBm.
m x RF 0
Ordering Information:

AMMC-3041-W10 = 10 devices per tray AMMC-3041-W50 = 50 devices per tray

For product information and a complete list of distributors, please go to our website:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright 2007 Avago Technologies Limited. All rights reserved. 5989-3933EN March 29, 2007

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AMMC-3041-W10 Datasheet file may be downloaded here without warranties.

Datasheet ID: AMMC-3041-W10 520107