ALM-1412-BLKG
ALM-1412-BLKG Datasheet
ALM-1412 GPS LNA-Filter Front-End Module
| Part | Datasheet |
|---|---|
ALM-1412-BLKG |
ALM-1412-BLKG (pdf) |
| Related Parts | Information |
|---|---|
ALM-1412-TR1G |
ALM-1412-TR1G |
| PDF Datasheet Preview |
|---|
| ALM-1412 GPS LNA-Filter Front-End Module Data Sheet Avago Technologies’ ALM-1412 is an LNA module, with integrated filter, designed for GPS band applications at 1.575GHz. The LNA uses Avago Technologies’proprietary GaAs Enhancement-mode pHEMT process to achieve high gain with very low noise figure and high linearity. Noise figure distribution is very tightly controlled. A CMOS-compatible shutdown pin is included either for turning the LNA on/off, or for current adjustment. The integrated filter utilizes an Avago Technologies’ leadingedge FBAR filter for exceptional rejection at Cell/PCSBand frequencies. The ALM-1412 is useable down to 1 V operation. It achieves low noise figure, high gain and linearity even at 1 V, making it suitable for use in critical low-power GPS applications or during low-battery situations. Application • GPS Band LNA Component Image SURFACE MOUNT x mm3 12-Lead MCOB 12 VDD 11 Gnd 10 Gnd RF_IN 1 Gnd 2 SD 3 1412 WWYY 9 Gnd 8 FILTER-OUT 7 Gnd Gnd 4 Gnd 5 Gnd 6 TOP VIEW 10 Gnd 11 Gnd 12 VDD Gnd 9 FILTER-OUT 8 Gnd 7 1 RF_IN 2 Gnd 3 SD Gnd 6 Gnd 5 Gnd 4 BOTTOM VIEW Note Package marking provides orientation and identification “1412” = Product Code “YY” = Year of manufacture “WW” = Work Week of manufacture • Very Low Noise Figure dB typical • High Gain dB typical • High IIP3 and IP1dB • Exceptional Cell/PCS-Band rejection • Advanced GaAs E-pHEMT Technology • Low external component count • Wide Supply Voltage 1 V to V • Shutdown current < uA • CMOS compatible shutdown pin SD current V: mA • Adjustable current via single external resistor/voltage • Meets MSL3 and Lead-Free • ESD-protected RF input 3 kV HBM • Small package dimension 3.3 L x2.1 W x1.1 H mm3 Specifications Typical Performance at 25°C At GHz, Vdd = V, Idd = mA • Gain = dB • NF = dB • IIP3 = dBm, IP1dB = dBm • S11 = dB, S22 = dB • Cell-Band Rejection 54 dBc • PCS-Band Rejection 63 dBc At GHz, V supply • S21 = dB • NF = dB • Idd = mA Attention Observe precautions for handling electrostatic sensitive devices. For RF_IN Pin 1 ESD Human Body Model = 3 kV All other pins ESD Machine Model = 40 V ESD Human Body Model = 300 V Refer to Avago Technologies Application Note A004R Electrostatic Discharge, Damage and Control Absolute Maximum Rating[1] TA = 25°C Symbol Parameter Device Drain to Source Voltage[2] Drain Current[2] Pin,max CW RF Input Power Vdd = V, Idd = mA Pdiss Total Power Dissipation[4] Junction Temperature TSTG Storage Temperature Recommended Operating Temperature Units V mA dBm Part Number Ordering Information No. of Devices ALM-1412-BLKG 100 ALM-1412 -TR1G 3000 Container Antistatic bag 13” Reel Package Dimensions PIN 1 ORIENTATION ALL EDGES GAPS 1412 WWYY TOP VIEW SIDE VIEW NOTES ALL DIMENSIONS ARE IN MILLIMETERS. DIMENSIONS ARE INCLUSIVE OF PLATING. DIMENSIONS ARE EXCLUSIVE OF MOLD FLASH AND METAL BURR. PCB Land Patterns and Stencil Design BOTTOM VIEW REF. REF. REF. 5x SQ REF. PCB land pattern and suggested grounding vias For B and C REF. A SQUARE B x mm C x mm D x mm E x mm F x mm G x mm Stencil outline drawing Combined PCB land pattern and stencil outline Dimensions are in mm Device Orientation REEL USER FEED DIRECTION CARRIER TAPE COVER TAPE USER FEED DIRECTION 1412 WWYY 1412 WWYY TOP VIEW 1412 WWYY END VIEW Tape Dimensions 5 MAX. SECTION Y - Y P10 3 |
| More datasheets: SA636 | S111032SS03QE | S111031SS03QE | LW Y8SG-U1V1-3K6L-1-Z | M5426 SL001 | M5426 SL005 | M5426 SL002 | 2322 615 13104 | 2322 615 13334 | 2322 615 13474 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ALM-1412-BLKG Datasheet file may be downloaded here without warranties.