AFCT-701ASDZ

AFCT-701ASDZ Datasheet

AFCT-701ASDZ 10Gb Ethernet, 1310 nm, 10GBASE-LR, SFP+ Transceiver for SMF 10km links Case temperature 0-85 qC

Part	Datasheet
AFCT-701ASDZ	AFCT-701ASDZ (pdf)

PDF Datasheet Preview
AFCT-701ASDZ 10Gb Ethernet, 1310 nm, 10GBASE-LR, SFP+ Transceiver for SMF 10km links Case temperature 0-85 qC Data Sheet The Avago AFCT-701ASDZ transceiver is part of a family of SFP+ products. This transceiver utilizes Avago’s 1310nm DFB and PIN Detector technology to provide an IEEE 10Gb Ethernet design compliant with the 10GBASELR standard. The AFCT-701ASDZ transceiver is designed with an extended case temperature to 0-85 qC to enable 10Gb Ethernet equipment designs with very high port density based on the new electrical and mechanical specification enhancements to the well known SFP specifications developed by the SFF Committee. These specifications are referred to as SFP+ to recognize these enhancements to previous SFP specifications used for lower speed products. Avago Technologies is an active participant in the SFF Committee specification development activities. Related Products x AFCT-701SDZ SFP+ 10 Gigabit Ethernet 10GBASE-LR transceiver with case temperature operated at 0-70 qC for operation in SMF link applications to 10 km x AFBR-707SDZ SFP+ 10 Gigabit Ethernet 10GBASELRM transceiver for 220 meter operation in all MMF link applications including OM1 and OM2 legacy fiber cables and new high bandwidth OM3 fiber cables. x The AFBR-703SDZ AFBR-703ASDZ with case temperature 0-70 0-85 °C is an SFP+ 10 Gigabit Ethernet 10GBASE-SR transceiver for use on multimode fiber cables. It is best suited for OM3 high bandwidth MMF link applications with link lengths up to 300 meters. x AFCT-5016Z SFP+ Evaluation Board The purpose of this SFP+ evaluation board is to provide the designer with a convenient means for evaluating SFP+ fiber optic transceivers. x Avago 1310nm DFB source and Transmitter Optical Subassembly technology x Avago PIN detector and Receiver Optical Subassembly technology x Typical power dissipation 850mW x Extended case temperature 0-85 qC x Full digital diagnostic management interface x Avago SFP+ package design enables equipment EMI performance in high port density applications with margin to Class B limits Specifications x Optical interface specifications per IEEE 802.3ae 10GBASE-LR x Electrical interface specifications per SFF Committee SFF 8431 Specifications for Enhanced and 10 Gigabit Small Form Factor Pluggable Module “SFP+” x Management interface specifications per SFF Committee SFF 8431 and SFF 8472 Diagnostic Monitoring Interface for Optical Transceivers x Mechanical specifications per SFF Committee SFF 8432 Improved Pluggable Formfactor “IPF” x LC Duplex optical connector interface confirming to ANSI TIA/EA 604-10 FOCIS 10A x Compliant to Restriction on Hazardous Substances RoHS per EU and China requirements x Class 1 Eye safe per requirements of IEC 60825-1 / CDRH Description, continued Installation The AFCT-701ASDZ transceiver package is compliant with the SFF 8432 Improved Pluggable Formfactor housing specification for the SFP+. It can be installed in any INF-8074 or SFF-8431/2 compliant Small Form Pluggable SFP port regardless of host equipment operating status The AFCT-701ASDZ is hot-pluggable, allowing the module to be installed while the host system is operating and on-line. Upon insertion, the transceiver housing makes initial contact with the host board SFP cage, mitigating potential damage due to Electro-Static Discharge ESD . Digital Diagnostic Interface and Serial Identification The two-wire interface protocol and signaling detail are based on SFF-8431. Conventional EEPROM memory, bytes 0-255 at memory address 0xA0, is organized in compliance with SFF-8431. New digital diagnostic information, bytes 0-255 at memory address 0xA2, is compliant to SFF-8472. The new diagnostic information provides the opportunity for Predictive Failure Identification, Compliance Prediction, Fault Isolation and Component Monitoring. Predictive Failure Identification The AFCT-701ASDZ predictive failure feature allows a host to identify potential link problems before system performance is impacted. Prior identification of link problems enables a host to service an application via “fail over”to a redundant link or replace a suspect device, maintaining system uptime in the process. For applications where ultra-high system uptime is required, a digital SFP provides a means to monitor two real-time laser metrics associated with observing laser degradation and predicting failure average laser bias current Tx_Bias and average laser optical power Tx_Power . Compliance Prediction Compliance prediction is the ability to determine if an optical transceiver is operating within its operating and environmental requirements. AFCT-701ASDZ devices provide real-time access to transceiver internal supply voltage and temperature, allowing a host to identify potential component compliance issues. Received optical power is also available to assess compliance of a cable plant and remote transmitter. When operating out of requirements, the link cannot guarantee error free transmission. Fault Isolation The fault isolation feature allows a host to quickly pinpoint the location of a link failure, minimizing downtime. For optical links, the ability to identify a fault at a local device, remote device or cable plant is crucial to speeding service of an installation. AFCT-701ASDZ real-time monitors of Tx_Bias, Tx_Power, Vcc, Temperature and Rx_Power can be used to assess local transceiver current operating conditions. In addition, status flags TX_DISABLE and Rx Loss of Signal LOS are mirrored in memory and available via the two-wire serial interface. Component Monitoring Component evaluation is a more casual use of the AFCT701ASDZ real-time monitors of Tx_Bias, Tx_Power, Vcc, Temperature and Rx_Power. Potential uses are as debugging aids for system installation and design, and transceiver parametric evaluation for factory or field qualification. For example, temperature per module can be observed in high density applications to facilitate thermal evaluation of blades, PCI cards and systems. OPTICAL INTERFACE LIGHT FROM FIBER RECEIVER PHOTO-DETECTOR AMPLIFICATION & QUANTIZATION CONTROLLER & MEMORY ELECTRICAL INTERFACE RD+ RECEIVE DATA RECEIVE DATA RX_LOS Ordering Information Please contact your local field sales engineer or one of Avago Technologies franchised distributors for ordering information. For technical information, please visit Avago Technologies’ WEB page at For information related to SFF Committee documentation visit Figure 2 depicts the recommended interface circuit to link the AFCT-701ASDZ to supporting physical layer ICs. Timing for the dedicated SFP+ control signals implemented in the transceiver are listed in Figure Application Support An Evaluation Kit and Reference Designs are available to assist in evaluation of the AFCT-701ASDZ. Please contact your local Field Sales representative for availability and ordering details. Regulatory Compliance The AFCT-701ASDZ complies with all applicable laws and regulations as detailed in Table Certification level is dependent on the overall configuration of the host equipment. The transceiver performance is offered as a figure of merit to assist the designer. Electrostatic Discharge ESD The AFCT-701ASDZ is compatible with ESD levels found in typical manufacturing and operating environments as described in Table In the normal handling and operation of optical transceivers, ESD is of concern in two circumstances. The first case is during handling of the transceiver prior to insertion into an SFP compliant cage. To protect the device, it’s important to use normal ESD handling precautions. These include use of grounded wrist straps, work-benches and floor wherever a transceiver is handled. The second case to consider is static discharges to the exterior of the host equipment chassis after installation. If the optical interface is exposed to the exterior of host equipment cabinet, the transceiver may be subject to system level ESD requirements. Electromagnetic Interference EMI Equipment incorporating 10 gigabit transceivers is typically subject to regulation by the FCC in the United States, CENELEC EN55022 CISPR 22 in Europe and VCCI in Japan. The AFCT-701ASDZ enables equipment compliance to these standards detailed in Table The metal housing and shielded design of the AFCT-701ASDZ minimizes the EMI challenge facing the equipment designer. For superior EMI performance it is recommended that equipment designs utilize SFP+ cages per SFF RF Immunity Susceptibility Due to its shielded design, the EMI immunity of the AFCT-701ASDZ exceeds typical industry standards. Eye Safety The AFCT-701ASDZ provides Class 1 single fault tolerant eye safety by design and has been tested for compliance with the requirements listed in Table The eye safety circuit continuously monitors the optical output power level and will disable the transmitter upon detecting a condition beyond the scope of Class 1 certification Such conditions can be due to inputs from the host board Vcc fluctuation, unbalanced code or a fault within the transceiver. US CDRH and EU TUV certificates are listed in table Flammability The AFCT-701ASDZ optical transceiver is made of metal and high strength, heat resistant, chemical resistant and UL 94V-0 flame retardant plastic. Table Regulatory Compliance Feature Electrostatic Discharge ESD to the Electrical Contacts Electrostatic Discharge ESD to the Duplex LC Receptacle Life Traffic ESD Immunity Life Traffic ESD Immunity Electromagnetic Interference EMI RF Immunity Laser Eye Safety and Equipment Type Testing TU¨ V Rheinland Product Safety BAUART GEPRU¨ FT TYPE APPROVED Component Recognition RoHS Compliance Test Method MIL-STD883C Method JEDEC DESD22-A11-4-B IEC 61000-4-2 IEC 61000-4-2 IEC 61000-4-2 FCC Class B CENELEC EN55022 Class B CISPR 22A VCCI Class 1 IEC 61000-4-3 US FDA CDRH AEL Class 1 US21 CFR, Subchapter J per Paragraphs and Performance Class 1 > 1KV for high speed I/O pins Class 1 > 2KV for all other pins Typically, no damage occurs with 25 kV when the duplex LC connector receptacle is contacted by a Human Body Model probe. 10 contacts of 8 kV on the electrical faceplate with device inserted into a panel. Air discharge of 15 kV min. contact to connector without damage. System margins are dependent on customer board and chassis design. Typically shows no measurable effect from a 10 V/m field swept from 80MHz to 1 GHz CDRH Accession No. 9521220-158 Pending Completion IEC EN60825-1 1994 + A11 + A2 IEC EN60825-2 1994 + A1 IEC EN60950 1992 + A1 + A2 + A3 + A4 + A11 Underwriters Laboratories and Canadian Standards Association Joint Component Recognition for Information Technology Equipment including Electrical Business Equipment RoHS Directive 2002/95/EC and it’s amendment directives 6/6 UL file E173874 SGS Test Report No. LPC1/00895/08 CTS ref. CTS/08-0238/Avago TX_DISABLE TX_FAULT VeeT TX_DISABLE TX_FAULT

PDF Datasheet Preview

AFCT-701ASDZ 10Gb Ethernet, 1310 nm, 10GBASE-LR, SFP+ Transceiver for SMF 10km links Case temperature 0-85 qC

Data Sheet

The Avago AFCT-701ASDZ transceiver is part of a family of SFP+ products. This transceiver utilizes Avago’s 1310nm DFB and PIN Detector technology to provide an IEEE 10Gb Ethernet design compliant with the 10GBASELR standard. The AFCT-701ASDZ transceiver is designed with an extended case temperature to 0-85 qC to enable 10Gb Ethernet equipment designs with very high port density based on the new electrical and mechanical specification enhancements to the well known SFP specifications developed by the SFF Committee. These specifications are referred to as SFP+ to recognize these enhancements to previous SFP specifications used for lower speed products. Avago Technologies is an active participant in the SFF Committee specification development activities.

Related Products
x AFCT-701SDZ SFP+ 10 Gigabit Ethernet 10GBASE-LR transceiver with case temperature operated at 0-70 qC for operation in SMF link applications to 10 km
x AFBR-707SDZ SFP+ 10 Gigabit Ethernet 10GBASELRM transceiver for 220 meter operation in all MMF link applications including OM1 and OM2 legacy fiber cables and new high bandwidth OM3 fiber cables.
x The AFBR-703SDZ AFBR-703ASDZ with case temperature 0-70 0-85 °C is an SFP+ 10 Gigabit Ethernet 10GBASE-SR transceiver for use on multimode fiber cables. It is best suited for OM3 high bandwidth MMF link applications with link lengths up to 300 meters.
x AFCT-5016Z SFP+ Evaluation Board The purpose of this SFP+ evaluation board is to provide the designer with a convenient means for evaluating SFP+ fiber optic transceivers.
x Avago 1310nm DFB source and Transmitter Optical Subassembly technology
x Avago PIN detector and Receiver Optical Subassembly technology
x Typical power dissipation 850mW
x Extended case temperature 0-85 qC
x Full digital diagnostic management interface
x Avago SFP+ package design enables equipment EMI performance in high port density applications with margin to Class B limits

Specifications
x Optical interface specifications per IEEE 802.3ae 10GBASE-LR
x Electrical interface specifications per SFF Committee SFF 8431 Specifications for Enhanced and 10 Gigabit Small Form Factor Pluggable Module “SFP+”
x Management interface specifications per SFF Committee SFF 8431 and SFF 8472 Diagnostic Monitoring Interface for Optical Transceivers
x Mechanical specifications per SFF Committee SFF 8432 Improved Pluggable Formfactor “IPF”
x LC Duplex optical connector interface confirming to ANSI TIA/EA 604-10 FOCIS 10A
x Compliant to Restriction on Hazardous Substances RoHS per EU and China requirements
x Class 1 Eye safe per requirements of IEC 60825-1 / CDRH

Description, continued

Installation

The AFCT-701ASDZ transceiver package is compliant with the SFF 8432 Improved Pluggable Formfactor housing specification for the SFP+. It can be installed in any INF-8074 or SFF-8431/2 compliant Small Form Pluggable SFP port regardless of host equipment operating status The AFCT-701ASDZ is hot-pluggable, allowing the module to be installed while the host system is operating and on-line. Upon insertion, the transceiver housing makes initial contact with the host board SFP cage, mitigating potential damage due to Electro-Static Discharge ESD .

Digital Diagnostic Interface and Serial Identification

The two-wire interface protocol and signaling detail are based on SFF-8431. Conventional EEPROM memory, bytes 0-255 at memory address 0xA0, is organized in compliance with SFF-8431. New digital diagnostic information, bytes 0-255 at memory address 0xA2, is compliant to SFF-8472. The new diagnostic information provides the opportunity for Predictive Failure Identification, Compliance Prediction, Fault Isolation and Component Monitoring.

Predictive Failure Identification

The AFCT-701ASDZ predictive failure feature allows a host to identify potential link problems before system performance is impacted. Prior identification of link problems enables a host to service an application via “fail over”to a redundant link or replace a suspect device, maintaining system uptime in the process. For applications where ultra-high system uptime is required, a digital SFP provides a means to monitor two real-time laser metrics associated with observing laser degradation and predicting failure average laser bias current Tx_Bias and average laser optical power Tx_Power .

Compliance Prediction

Compliance prediction is the ability to determine if an optical transceiver is operating within its operating and environmental requirements. AFCT-701ASDZ devices provide real-time access to transceiver internal supply voltage and temperature, allowing a host to identify potential component compliance issues. Received optical power is also available to assess compliance of a cable plant and remote transmitter. When operating out of requirements, the link cannot guarantee error free transmission.

Fault Isolation

The fault isolation feature allows a host to quickly pinpoint the location of a link failure, minimizing downtime. For optical links, the ability to identify a fault at a local device, remote device or cable plant is crucial to speeding service of an installation. AFCT-701ASDZ real-time monitors of Tx_Bias, Tx_Power, Vcc, Temperature and Rx_Power can be used to assess local transceiver current operating conditions. In addition, status flags TX_DISABLE and Rx Loss of Signal LOS are mirrored in memory and available via the two-wire serial interface.

Component Monitoring

Component evaluation is a more casual use of the AFCT701ASDZ real-time monitors of Tx_Bias, Tx_Power, Vcc, Temperature and Rx_Power. Potential uses are as debugging aids for system installation and design, and transceiver parametric evaluation for factory or field qualification. For example, temperature per module can be observed in high density applications to facilitate thermal evaluation of blades, PCI cards and systems.

OPTICAL INTERFACE LIGHT FROM FIBER

RECEIVER PHOTO-DETECTOR

AMPLIFICATION & QUANTIZATION

CONTROLLER & MEMORY

ELECTRICAL INTERFACE

RD+ RECEIVE DATA RECEIVE DATA RX_LOS
Ordering Information
Please contact your local field sales engineer or one of Avago Technologies franchised distributors for ordering information. For technical information, please visit Avago Technologies’ WEB page at For information related to SFF Committee documentation visit

Figure 2 depicts the recommended interface circuit to link the AFCT-701ASDZ to supporting physical layer ICs. Timing for the dedicated SFP+ control signals implemented in the transceiver are listed in Figure

Application Support
An Evaluation Kit and Reference Designs are available to assist in evaluation of the AFCT-701ASDZ. Please contact your local Field Sales representative for availability and ordering details.

Regulatory Compliance

The AFCT-701ASDZ complies with all applicable laws and regulations as detailed in Table Certification level is dependent on the overall configuration of the host equipment. The transceiver performance is offered as a figure of merit to assist the designer.

Electrostatic Discharge ESD

The AFCT-701ASDZ is compatible with ESD levels found in typical manufacturing and operating environments as described in Table In the normal handling and operation of optical transceivers, ESD is of concern in two circumstances.

The first case is during handling of the transceiver prior to insertion into an SFP compliant cage. To protect the device, it’s important to use normal ESD handling precautions. These include use of grounded wrist straps, work-benches and floor wherever a transceiver is handled.

The second case to consider is static discharges to the exterior of the host equipment chassis after installation. If the optical interface is exposed to the exterior of host equipment cabinet, the transceiver may be subject to system level ESD requirements.

Electromagnetic Interference EMI

Equipment incorporating 10 gigabit transceivers is typically subject to regulation by the FCC in the United States, CENELEC EN55022 CISPR 22 in Europe and VCCI in Japan. The AFCT-701ASDZ enables equipment compliance to these standards detailed in Table The metal housing and shielded design of the AFCT-701ASDZ minimizes the EMI challenge facing the equipment designer. For superior EMI performance it is recommended that equipment designs utilize SFP+ cages per SFF

RF Immunity Susceptibility

Due to its shielded design, the EMI immunity of the AFCT-701ASDZ exceeds typical industry standards.

Eye Safety

The AFCT-701ASDZ provides Class 1 single fault tolerant eye safety by design and has been tested for compliance with the requirements listed in Table The eye safety circuit continuously monitors the optical output power level and will disable the transmitter upon detecting a condition beyond the scope of Class 1 certification Such conditions can be due to inputs from the host board Vcc fluctuation, unbalanced code or a fault within the transceiver. US CDRH and EU TUV certificates are listed in table

Flammability

The AFCT-701ASDZ optical transceiver is made of metal and high strength, heat resistant, chemical resistant and UL 94V-0 flame retardant plastic.

Table Regulatory Compliance Feature Electrostatic Discharge ESD to the Electrical Contacts Electrostatic Discharge ESD to the Duplex LC Receptacle

Life Traffic ESD Immunity

Life Traffic ESD Immunity

Electromagnetic Interference EMI

RF Immunity

Laser Eye Safety and Equipment Type Testing

TU¨ V Rheinland Product Safety

BAUART GEPRU¨ FT

TYPE APPROVED

Component Recognition

RoHS Compliance

Test Method MIL-STD883C Method JEDEC DESD22-A11-4-B IEC 61000-4-2

IEC 61000-4-2

IEC 61000-4-2

FCC Class B CENELEC EN55022 Class B CISPR 22A VCCI Class 1 IEC 61000-4-3

US FDA CDRH AEL Class 1 US21 CFR, Subchapter J per Paragraphs and

Performance Class 1 > 1KV for high speed I/O pins Class 1 > 2KV for all other pins Typically, no damage occurs with 25 kV when the duplex LC connector receptacle is contacted by a Human Body Model probe. 10 contacts of 8 kV on the electrical faceplate with device inserted into a panel. Air discharge of 15 kV min. contact to connector without damage. System margins are dependent on customer board and chassis design.

Typically shows no measurable effect from a 10 V/m field swept from 80MHz to 1 GHz CDRH Accession No. 9521220-158 Pending Completion

IEC EN60825-1 1994 + A11 + A2 IEC EN60825-2 1994 + A1 IEC EN60950 1992 + A1 + A2 + A3 + A4 + A11

Underwriters Laboratories and Canadian Standards Association Joint Component Recognition for Information Technology Equipment including Electrical Business Equipment

RoHS Directive 2002/95/EC and it’s amendment directives 6/6

UL file E173874

SGS Test Report No. LPC1/00895/08 CTS ref. CTS/08-0238/Avago

TX_DISABLE TX_FAULT

VeeT

TX_DISABLE TX_FAULT

More datasheets: B43698B5106Q | B43698A5685Q7 | B43698A5156Q9 | B43698A5106Q9 | B43698A5685Q9 | B43698A5106Q7 | B43698A5226Q7 | B43698A5156Q7 | B43698A5336Q7 | 789

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AFCT-701ASDZ Datasheet file may be downloaded here without warranties.

Datasheet ID: AFCT-701ASDZ 520071