AFBR-2531CZ

AFBR-2531CZ Datasheet

AFBR-25x1CZ Megabaud Versatile Link Fiber Optic Receiver for 1mm POF and 200µm PCS

Part	Datasheet
AFBR-2531CZ	AFBR-2531CZ (pdf)

Related Parts	Information
AFBR-2521CZ	AFBR-2521CZ

PDF Datasheet Preview
AFBR-25x1CZ Megabaud Versatile Link Fiber Optic Receiver for 1mm POF and 200µm PCS Data Sheet The AFBR-25x1CZ receiver consists of an IC with an integrated photodiode providing a TTL logic families compatible output. In combination with the Avago AFBR-15x9Z or AFBR-16x9Z transmitter any type of signal from DC up to 5MBd at distances up to 50 meters with 1mm 0.5NA POF and 500 meters with 200µm 0.37NA PCS is supported. The receiver is a 4-pin device, packed in Versatile Link housing. Versatile Link components can be interlocked N-plexed together to minimize space and to provide dual connections with the duplex connectors. Various simplex and duplex connectors, as well as POF cables are available for Versatile Link components. Please contact Avago Technologies for details or visit our company website at avagotech.com AFBR-25x1CZ devices have inverted output signals means that light_on will lead to Data_out low. Available options Horizontal Package Vertical Package Tilted 30° Package AFBR-2521CZ AFBR-2531CZ AFBR-2541CZ • RoHS-compliant • Data transmission at signal rates from DC up to 5MBd • Receiver integrated PIN diode and digitalizing IC with TTL output logic • Power-on reset POR • Up to 50 meter distance with 1mm Plastic Optical Fiber POF up to 500 meter distance with 200µm Polymer Cladding Silica PCS Fiber • Operating temperature range of -40 °C to +85 °C • Compatible with Avago’s Versatile Link family of connectors, for easy termination of fiber • Optical Receiver for 5MBd systems and below • Industrial control and factory automation • Extension of RS-232 and RS-485 • High voltage insulation • Elimination of ground loops • Reduces voltage transient susceptibility • Drivers and Inverters Application Literature Application Note 1035 Versatile Link - AV02-0730EN Package and Handling Information The compact Versatile Link package is made of a flame retardant material and uses the same pad layout as a standard, eight-pin dual-in-line package. Horizontal, Vertical, and Tilted 30° packages are available. These low profile Versatile Link packages are stackable and are enclosed to provide a dust-resistant seal. Snap action simplex, simplex latching, duplex, and duplex latching connectors are offered with simplex or duplex cables. Package Housing Color Versatile Link components and simplex connectors are color coded to eliminate confusion when making connections. Receiver packages are black and transmitters are in grey color respectively. Package Orientation Performance and pinouts for the horizontal, vertical, and tilted 30° packages are identical. To provide additional attachment support for the vertical Versatile Link housing the designer has the option of using a self-tapping screw through a printed circuit board into a mounting hole at the bottom of the package. For most applications this is not necessary. Handling Versatile Link components are auto-insertable. When wave soldering is performed with Versatile Link components, the optical port plug should be left in to prevent contamination of the port. Do not use reflow solder processes i.e., infrared reflow or vapor-phase reflow . Non-halogenated water soluble fluxes i.e., 0% chloride , not rosin based fluxes, are recommended for use with Versatile Link components. Versatile Link components are moisture sensitive devices and are shipped in a moisture sealed bag. If the components are exposed to air for an extended period of time, they may require a baking step before the soldering process. Refer to the special labeling on the shipping tube for details. Recommended chemicals for Cleaning/Degreasing Alcohols methyl, isopropyl, isobutyl. Aliphatics hexane, heptanes. Other soap solution, naphtha. Do not use partially halogenated hydrocarbons such as trichloroethane, ketones such as MEK, acetone, chloroform, ethyl acetate, methylene dichloride, phenol, methylene chloride, or N-methylpyrolldone. Also, Avago does not recommend the use of cleaners that use halogenated hydrocarbons because of their potential environmental harm. Interlocked Stacked Assemblies refer to Figure 1 Horizontal packages may be stacked by placing units with pins facing upward. Initially engage the mechanism by sliding the L bracket body from above into the L slot body of the lower package. Use a straight edge, such as a ruler, to bring all stacked units into uniform alignment. This prevents potential harm that could occur to fingers and hands of assemblers from the package pins. Stacked horizontal packages can be disengaged if necessary. Repeated stacking and causes no damage to individual units. To stack vertical packages, hold one unit in each hand, with the pins facing away and the optical ports on the bottom. Slide the L bracket unit into the L slot unit. The straight edge used for horizontal package alignment is not needed. Stacking Horizontal Modules Stacking Vertical Modules Figure 1a. Interlocked stacked Horizontal packages Tilted 30° Module Figure 1b. Interlocked stacked Vertical packages Figure 1c. Interlocked stacked Tilted 30° packages 3 Mechanical Dimensions Horizontal Module Vertical Module MAX. MIN. DIA. DIMENSIONS IN MILLIMETERS INCHES . Figure 2a. Mechanical Dimensions - Horizontal packages

PDF Datasheet Preview

AFBR-25x1CZ Megabaud Versatile Link Fiber Optic Receiver for 1mm POF and 200µm PCS

Data Sheet

The AFBR-25x1CZ receiver consists of an IC with an integrated photodiode providing a TTL logic families compatible output. In combination with the Avago AFBR-15x9Z or AFBR-16x9Z transmitter any type of signal from DC up to 5MBd at distances up to 50 meters with 1mm 0.5NA POF and 500 meters with 200µm 0.37NA PCS is supported.

The receiver is a 4-pin device, packed in Versatile Link housing. Versatile Link components can be interlocked N-plexed together to minimize space and to provide dual connections with the duplex connectors. Various simplex and duplex connectors, as well as POF cables are available for Versatile Link components. Please contact Avago Technologies for details or visit our company website at avagotech.com

AFBR-25x1CZ devices have inverted output signals means that light_on will lead to Data_out low.

Available options

Horizontal Package Vertical Package Tilted 30° Package

AFBR-2521CZ AFBR-2531CZ AFBR-2541CZ
• RoHS-compliant
• Data transmission at signal rates from DC up to 5MBd
• Receiver integrated PIN diode and digitalizing IC with

TTL output logic
• Power-on reset POR
• Up to 50 meter distance with 1mm Plastic Optical Fiber

POF up to 500 meter distance with 200µm Polymer Cladding Silica PCS Fiber
• Operating temperature range of -40 °C to +85 °C
• Compatible with Avago’s Versatile Link family of connectors, for easy termination of fiber
• Optical Receiver for 5MBd systems and below
• Industrial control and factory automation
• Extension of RS-232 and RS-485
• High voltage insulation
• Elimination of ground loops
• Reduces voltage transient susceptibility
• Drivers and Inverters

Application Literature

Application Note 1035 Versatile Link - AV02-0730EN

Package and Handling Information

The compact Versatile Link package is made of a flame retardant material and uses the same pad layout as a standard, eight-pin dual-in-line package. Horizontal, Vertical, and Tilted 30° packages are available. These low profile Versatile Link packages are stackable and are enclosed to provide a dust-resistant seal. Snap action simplex, simplex latching, duplex, and duplex latching connectors are offered with simplex or duplex cables.

Package Housing Color

Versatile Link components and simplex connectors are color coded to eliminate confusion when making connections. Receiver packages are black and transmitters are in grey color respectively.

Package Orientation

Performance and pinouts for the horizontal, vertical, and tilted 30° packages are identical. To provide additional attachment support for the vertical Versatile Link housing the designer has the option of using a self-tapping screw through a printed circuit board into a mounting hole at the bottom of the package. For most applications this is not necessary.

Handling

Versatile Link components are auto-insertable. When wave soldering is performed with Versatile Link components, the optical port plug should be left in to prevent contamination of the port. Do not use reflow solder processes i.e., infrared reflow or vapor-phase reflow . Non-halogenated water soluble fluxes i.e., 0% chloride , not rosin based fluxes, are recommended for use with Versatile Link components.

Versatile Link components are moisture sensitive devices and are shipped in a moisture sealed bag. If the components are exposed to air for an extended period of time, they may require a baking step before the soldering process. Refer to the special labeling on the shipping tube for details.

Recommended chemicals for Cleaning/Degreasing

Alcohols methyl, isopropyl, isobutyl. Aliphatics hexane, heptanes. Other soap solution, naphtha.

Do not use partially halogenated hydrocarbons such as trichloroethane, ketones such as MEK, acetone, chloroform, ethyl acetate, methylene dichloride, phenol, methylene chloride, or N-methylpyrolldone. Also, Avago does not recommend the use of cleaners that use halogenated hydrocarbons because of their potential environmental harm.

Interlocked Stacked Assemblies refer to Figure 1

Horizontal packages may be stacked by placing units with pins facing upward. Initially engage the mechanism by sliding the L bracket body from above into the L slot body of the lower package. Use a straight edge, such as a ruler, to bring all stacked units into uniform alignment. This prevents potential harm that could occur to fingers and hands of assemblers from the package pins. Stacked horizontal packages can be disengaged if necessary. Repeated stacking and causes no damage to individual units.

To stack vertical packages, hold one unit in each hand, with the pins facing away and the optical ports on the bottom. Slide the L bracket unit into the L slot unit. The straight edge used for horizontal package alignment is not needed.

Stacking Horizontal Modules

Stacking Vertical Modules

Figure 1a. Interlocked stacked Horizontal packages

Tilted 30° Module

Figure 1b. Interlocked stacked Vertical packages

Figure 1c. Interlocked stacked Tilted 30° packages 3

Mechanical Dimensions Horizontal Module

Vertical Module

MAX. MIN.

DIA.

DIMENSIONS IN MILLIMETERS INCHES .

Figure 2a. Mechanical Dimensions - Horizontal packages

More datasheets: 5340H5-5V | 5340H3-5V | 5340H1-5V | 5340H7LC | 5340H5LC | 5340H7 | 5340H1 | 5340H1LC | 5340H3 | AFBR-2521CZ

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AFBR-2531CZ Datasheet file may be downloaded here without warranties.

Datasheet ID: AFBR-2531CZ 520036