ADNS-6000

ADNS-6000 Datasheet

ADNS-6000 Laser Mouse Sensor

Part	Datasheet
ADNS-6000	ADNS-6000 (pdf)

PDF Datasheet Preview
ADNS-6000 Laser Mouse Sensor Data Sheet The Avago Technologies ADNS-6000 sensor along with the ADNS-6120 or ADNS-6130-001 lens, ADNS-6230-001 clip and ADNV-6340 laser diode form a complete and compact laser mouse tracking system. It is world’s first laser-illuminated laser mouse navigation systems for corded applications. Enabled with Avago Technologies LaserStream, It can operate on many surface that prove difficult for traditional LED-based optical navigation. It’s high-speed mouse motion - with velocity up to 20 inches per second and accelerations up to 8g. There is no moving part in the complete assembly for ADNS-6000 laser mouse system, thus it is high and less maintenance for the end user. In additional, precision optical alignment is not required, facilitating high volume assembly. Theory of Operation The ADNS-6000 is based on LaserStream Technology, which measures changes in position by optically acquiring sequential images frames and mathematically determining the direction and magnitude of movement. ADNS-6000 contains an Image Acquisition System IAS , a Digital Signal Processor DSP , and a four wire serial port. The IAS acquires microscopic surface images via the lens and illumination system. These images are processed by the DSP to determine the direction and distance of motion. The DSP calculates the and relative displacement values. An external microcontroller reads the and information from the sensor serial port. The microcontroller then translates the data into PS2 or USB signals before sending them to the host PC or game console. • Mice for game consoles and computer games • Mice for desktop PC’s, Workstations, and portable PC’s • Trackballs • Integrated input devices • High speed motion detection up to 20 ips and 8g • New LaserStream architecture for greatly improved optical navigation technology • Programmable frame rate over 6400 frames per sec- ond • SmartSpeed self-adjusting frame rate for optimum performance • Serial port burst mode for fast data transfer • 400 or 800 cpi selectable resolution • Single volt power supply • Four-wire serial port along with Power Down, and Reset pins • Laser fault detect circuitry on-chip for Eye Safety Compliance Pinout Pin Name 1 NCS Chip select active low input 2 MISO Serial data output Master In/Slave Out 3 SCLK Serial clock input 4 MOSI Serial data input Master Out/Slave In No Connection 6 RESET Reset input 7 NPD Power down active low input 8 OSC_OUT Oscillator output 9 GUARD Oscillator GND for PCB guard optional 10 OSC_IN Oscillator input 11 REFC Reference capacitor 12 REFB Reference capacitor 13 RBIN Set XY_LASER current

PDF Datasheet Preview

ADNS-6000 Laser Mouse Sensor

Data Sheet

The Avago Technologies ADNS-6000 sensor along with the ADNS-6120 or ADNS-6130-001 lens, ADNS-6230-001 clip and ADNV-6340 laser diode form a complete and compact laser mouse tracking system. It is world’s first laser-illuminated laser mouse navigation systems for corded applications. Enabled with Avago Technologies LaserStream, It can operate on many surface that prove difficult for traditional LED-based optical navigation. It’s high-speed mouse motion - with velocity up to 20 inches per second and accelerations up to 8g.

There is no moving part in the complete assembly for ADNS-6000 laser mouse system, thus it is high and less maintenance for the end user. In additional, precision optical alignment is not required, facilitating high volume assembly.

Theory of Operation

The ADNS-6000 is based on LaserStream Technology, which measures changes in position by optically acquiring sequential images frames and mathematically determining the direction and magnitude of movement.

ADNS-6000 contains an Image Acquisition System IAS , a Digital Signal Processor DSP , and a four wire serial port. The IAS acquires microscopic surface images via the lens and illumination system. These images are processed by the DSP to determine the direction and distance of motion. The DSP calculates the and relative displacement values. An external microcontroller reads the and information from the sensor serial port. The microcontroller then translates the data into PS2 or USB signals before sending them to the host PC or game console.
• Mice for game consoles and computer games
• Mice for desktop PC’s, Workstations, and portable

PC’s
• Trackballs
• Integrated input devices
• High speed motion detection up to 20 ips and 8g
• New LaserStream architecture for greatly improved
optical navigation technology
• Programmable frame rate over 6400 frames per sec-
ond
• SmartSpeed self-adjusting frame rate for optimum
performance
• Serial port burst mode for fast data transfer
• 400 or 800 cpi selectable resolution
• Single volt power supply
• Four-wire serial port along with Power Down, and

Reset pins
• Laser fault detect circuitry on-chip for Eye Safety

Compliance

Pinout

Pin Name
1 NCS

Chip select active low input
2 MISO

Serial data output Master In/Slave Out
3 SCLK

Serial clock input
4 MOSI

Serial data input Master Out/Slave In

No Connection
6 RESET

Reset input
7 NPD

Power down active low input
8 OSC_OUT Oscillator output
9 GUARD

Oscillator GND for PCB guard optional
10 OSC_IN

Oscillator input
11 REFC

Reference capacitor
12 REFB

Reference capacitor
13 RBIN

Set XY_LASER current

More datasheets: 94880 | 94878 | 94876 | 94874 | 94862 | 94870 | 94872 | 94864 | 94866 | 94882

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADNS-6000 Datasheet file may be downloaded here without warranties.

Datasheet ID: ADNS-6000 519992