ADNK-7053-ND24

ADNK-7053-ND24 Datasheet

ADNK-7053-ND24 USB 2.4GHz RF Wireless Laser Mouse Designer’s Kit

Part	Datasheet
ADNK-7053-ND24	ADNK-7053-ND24 (pdf)

PDF Datasheet Preview
ADNK-7053-ND24 USB 2.4GHz RF Wireless Laser Mouse Designer’s Kit Product Overview Avago Technologies is producing a new wireless laser mouse reference design kit. Based on the new Avago Technologies ADNS-7050 low power laser mouse sensor, Texas Instruments MSP430F1222 microcontroller, Nordic Semiconductor nRF2402 2.4GHz RF transmitter and nRF2401A 2.4GHz RF transceiver, Cypress CY7C63231A USB microcontroller, this reference design kit provides a power efficient and feature-rich solution in one neat package. The Avago Technologies ADNS-7050 low power laser mouse sensor, an 18-pin staggered dual inline package DIP , is based on LaserStream Technology, which measures changes in position by optically acquiring sequential surface images frames and mathematically determining the direction and magnitude of movement. Its highperformance, low power architecture is capable of sensing high-speed mouse motion while prolonging battery life, two performance areas essential in demanding wireless applications. The ADNS-7050 sensor along with the ADNS6120 or ADNS-6130-001 lens, ADNS-6230-001 clip and ADNV-6340 VCSEL form a complete and compact laser mouse tracking system. There is no moving part, which means high reliability and less maintenance for the end user. In addition, precision optical alignment is not required, facilitating high volume assembly. • Complete laser mouse reference design kit • 98SE, Windows 2000 and Windows XP compatibility • USB low-speed compliance • User identity code to avoid conflict with other devices • High reliability • New LaserStream Technology • Smooth surface navigation • Enhanced SmartSpeed self-adjusting frame rate for optimum performance • High speed motion detection up to 20 ips and 8G • 800 cpi resolution • No mechanical moving parts • A high data rate 2.4GHz RF link • Transmission data rate up to 1 Mbps • 15 meters communication distance • Self-adjusting power-saving modes for longest battery life • Laser fault detect circuitry on-chip for Eye Safety Compliance • Minimal number of passive components The Texas Instruments MSP430F1222 is the ultra low-power mixed signal microcontroller with a built-in 16-bit timer, 10-bit A/D converter with integrated reference and data transfer controller DTC and twenty-two I/O pins. In addition, the MSP430F1222 microcontroller has built-in communication capability using asynchronous UART and synchronous SPI protocols. The architecture, combined with five low power modes is optimized to achieve extended battery life on wireless application. The Nordic nRF2402 and nRF2401A are the low power single-chip radio transmitter and transceiver for the world wide - GHz ISM band. The entire transmitter and transceiver including all inductors and filters are integrated in each single chip respectively which gives the lowest cost solution to the end user. All configurations of the nRF2402 transmitter and nRF2401A transceiver are done via a standard serial interface. The nRF devices include the ShockBurst engine which allow for high datarates on air using low datarates between the microcontroller and the nRF device, it will also automatically validate the packets adress and CRC, further reducing the microcontrollers processing tasks. This kit is connectable to a PC via the USB port. It is based on the 2.4GHz RF technology, the data generated from displacement detection / button status in the laser mouse is encoded with a pre-defined serial type protocol handled by firmware in the MCU. In the RF stage, the encoded data is used for GFSK modulation. The captured data from the RF receiver stage is decoded with a corresponding packet format used for mouse applications. The final data is sent to the host through the USB interface. SENSOR VSCEL PCB VSCEL CLIP LENS BASE PLATE SURFACE Figure Sectional view of PCB assembly highlighting all optical mouse components optical mouse sensor, clip, lens, LASER, PCB, and base plate . Schematic Design of Overall Circuit R103 100KR R102 100KR R101 100KR SW102 1 SW104 1 SW103 1 Left_Sw 2 Z_Sw 2 Right_Sw 2 LINK TO H103 1 H101 2 3 ++ 4 5 ++ 6 7 ++ 8 ++ CON8AP R107 27KR R108 27KR SW105 ENCODER SW C112 100nF LINK TO H102 H+10+2 Ordering Information For ordering information, please contact your local Avago Technologies sales representative. For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright 2006 Avago Technologies Pte. All rights reserved. AV01-0076EN - March 27, 2006

PDF Datasheet Preview

ADNK-7053-ND24 USB 2.4GHz RF Wireless Laser Mouse Designer’s Kit

Product Overview

Avago Technologies is producing a new wireless laser mouse reference design kit. Based on the new Avago Technologies ADNS-7050 low power laser mouse sensor, Texas Instruments MSP430F1222 microcontroller, Nordic Semiconductor nRF2402 2.4GHz RF transmitter and nRF2401A 2.4GHz RF transceiver, Cypress CY7C63231A USB microcontroller, this reference design kit provides a power efficient and feature-rich solution in one neat package.

The Avago Technologies ADNS-7050 low power laser mouse sensor, an 18-pin staggered dual inline package DIP , is based on LaserStream Technology, which measures changes in position by optically acquiring sequential surface images frames and mathematically determining the direction and magnitude of movement. Its highperformance, low power architecture is capable of sensing high-speed mouse motion while prolonging battery life, two performance areas essential in demanding wireless applications.

The ADNS-7050 sensor along with the ADNS6120 or ADNS-6130-001 lens, ADNS-6230-001 clip and ADNV-6340 VCSEL form a complete and compact laser mouse tracking system. There is no moving part, which means high reliability and less maintenance for the end user. In addition, precision optical alignment is not required, facilitating high volume assembly.
• Complete laser mouse reference design kit
• 98SE, Windows 2000 and Windows XP
compatibility
• USB low-speed compliance
• User identity code to avoid conflict with other devices
• High reliability
• New LaserStream Technology
• Smooth surface navigation
• Enhanced SmartSpeed self-adjusting frame rate for
optimum performance
• High speed motion detection up to 20 ips and 8G
• 800 cpi resolution
• No mechanical moving parts
• A high data rate 2.4GHz RF link
• Transmission data rate up to 1 Mbps
• 15 meters communication distance
• Self-adjusting power-saving modes for longest battery
life
• Laser fault detect circuitry on-chip for Eye Safety Compliance
• Minimal number of passive components

The Texas Instruments MSP430F1222 is the ultra low-power mixed signal microcontroller with a built-in 16-bit timer, 10-bit A/D converter with integrated reference and data transfer controller DTC and twenty-two I/O pins. In addition, the MSP430F1222 microcontroller has built-in communication capability using asynchronous UART and synchronous SPI protocols. The architecture, combined with five low power modes is optimized to achieve extended battery life on wireless application.

The Nordic nRF2402 and nRF2401A are the low power single-chip radio transmitter and transceiver for the world wide - GHz ISM band. The entire transmitter and transceiver including all inductors and filters are integrated in each single chip respectively which gives the lowest cost solution to the end user. All configurations of the nRF2402 transmitter and nRF2401A transceiver are done via a standard serial interface. The nRF devices include the ShockBurst engine which allow for high datarates on air using low datarates between the microcontroller and the nRF device, it will also
automatically validate the packets adress and CRC, further reducing the microcontrollers processing tasks.

This kit is connectable to a PC via the USB port. It is based on the 2.4GHz RF technology, the data generated from displacement detection / button status in the laser mouse is encoded with a pre-defined serial type protocol handled by firmware in the MCU. In the RF stage, the encoded data is used for GFSK modulation. The captured data from the RF receiver stage is decoded with a corresponding packet format used for mouse applications. The final data is sent to the host through the USB interface.

SENSOR

VSCEL PCB

VSCEL CLIP

LENS

BASE PLATE

SURFACE

Figure Sectional view of PCB assembly highlighting all optical mouse components optical mouse sensor, clip, lens, LASER, PCB, and base plate .

Schematic Design of Overall Circuit

R103 100KR R102 100KR R101 100KR

SW102 1

SW104 1

SW103 1

Left_Sw 2

Z_Sw 2

Right_Sw 2

LINK TO H103 1 H101 2 3 ++ 4 5 ++ 6 7 ++ 8
++ CON8AP

R107 27KR

R108 27KR

SW105

ENCODER SW

C112 100nF

LINK TO H102

H+10+2
Ordering Information
For ordering information, please contact your local Avago Technologies sales representative.

For product information and a complete list of distributors, please go to our web site:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright 2006 Avago Technologies Pte. All rights reserved. AV01-0076EN - March 27, 2006

More datasheets: B39321R883H210 | B66337G0000X127 | B66337G0000X187 | B66337G0100X127 | B66337G1000X127 | B66337G0500X127 | B66337G0250X127 | 3575 | A000138 | 1185

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADNK-7053-ND24 Datasheet file may be downloaded here without warranties.

Datasheet ID: ADNK-7053-ND24 519959