ADNK-2623

ADNK-2623 Datasheet

ADNK-2623 Optical Mouse Designer’s Kit

Part	Datasheet
ADNK-2623	ADNK-2623 (pdf)

PDF Datasheet Preview
ADNK-2623 Optical Mouse Designer’s Kit Design Guide Introduction The ADNK-2623 reference design mouse unit enables users to evaluate the performance of the Optical Tracking Engine sensor, lens, LED assembly clip, LED over both a USB or PS/2 connection, using Cypress enCoRe USB Controller. This kit also allows the user to understand the recommended mechanical assembly. See Figure The ADNK-2623 comprises of the plastic case, printed circuit board PCB , lens, buttons, and USB cable. See Figure Unscrewing the one screw located at the base of the unit can open the It can be further disassembled by lifting and pulling the PCB out of the base plate. The lens is not permanently attached to the sensor and will drop out of the assembly. For more information, check out the Avago’s optical mouse sensor website. Functionality 3-button, scroll wheel combi mouse. System Requirements PCs using 98/ NT/ 2000 with PS/2 port and standard USB mouse driver loaded. Operating For PS/2 Mode Step 1 Turn off the PC. Step 2 Plug the mouse unit’s PS/2 connector into the PC’s PS/2 port. Step 3 Turn on the PC. All of the mouse buttons and scroll wheel will function exactly like a standard PS/2 mouse. Operating For USB Mode Hot pluggable with USB port. The PC does not need to be powered off when plugging or unplugging the evaluation mouse. Kit Components Refer to table on page Avago Technologies in partnership with Sensor The sensor technical information is contained in the ADNS-2620 Data Sheet. USB Controller Technical information on the Cypress enCoRe USB controller is contained in the CY7C63723 Data Sheet. The enclosed “Cypress Lab” CD-ROM contains the development tools for the CY7C63723. These tools will allow the designer to make changes and recompile the source code. To perform In-Circuit Emulation for easier debugging of new code development, contact Cypress to purchase the CY3654 Development Kit and the CY3654-P05 Personality Board. Programming support and programmer adaptors for the Cypress CY7C63723-PC can be found through Cypress CY3649-xxxV + CY3083-DP48 + CY3083-07 or through most 3rd party programming companies. For further information on this product, please contact Cypress Semiconductor. Lens The lens technical information is contained in the HDNS2100 Data Sheet. The flange on the standard HDNS-2100 lens is for ESD protection. LED Assembly Clip The information on the assembly clip is contained in the Data Sheet. The LED technical information is contained in the HLMPED80-XX000 Data Sheet and Application Note Additional application notes regarding Eye Safety Requirements are also available on Avago’s website. Base Plate Feature File The IGES file on the floppy disc provides recommended base plate molding features to ensure optical alignment. Reference Design Gerber file Sensor Clip Lens/Light Pipe Figure Sectional view of PCB assembly highlighting optical mouse components optical mouse sensor, clip, lens, LED, PCB and base plate . Base Plate Surface HDNS-2200 Clip HLMP-ED80-XX000 LED ADNS-2620 Sensor Customer supplied PCB HDNS-2100 Lens Customer supplied base plate with recommended alignment features per IGES drawing Figure Exploded view drawing of optical tracking engine with ADNS-2620 optical mouse sensor.

PDF Datasheet Preview

ADNK-2623 Optical Mouse Designer’s Kit

Design Guide

Introduction

The ADNK-2623 reference design mouse unit enables users to evaluate the performance of the Optical Tracking Engine sensor, lens, LED assembly clip, LED over both a USB or PS/2 connection, using Cypress enCoRe USB Controller. This kit also allows the user to understand the recommended mechanical assembly. See Figure

The ADNK-2623 comprises of the plastic case, printed circuit board PCB , lens, buttons, and USB cable. See Figure Unscrewing the one screw located at the base of the unit can open the It can be further disassembled by lifting and pulling the PCB out of the base plate. The lens is not permanently attached to the sensor and will drop out of the assembly.

For more information, check out the Avago’s optical mouse sensor website.

Functionality
3-button, scroll wheel combi mouse.

System Requirements

PCs using 98/ NT/ 2000 with PS/2 port and standard USB mouse driver loaded.

Operating For PS/2 Mode

Step 1 Turn off the PC.

Step 2 Plug the mouse unit’s PS/2 connector into the PC’s PS/2 port.

Step 3 Turn on the PC. All of the mouse buttons and scroll wheel will function exactly like a standard PS/2 mouse.

Operating For USB Mode

Hot pluggable with USB port. The PC does not need to be powered off when plugging or unplugging the evaluation mouse.

Kit Components

Refer to table on page

Avago Technologies in partnership with

Sensor

The sensor technical information is contained in the ADNS-2620 Data Sheet.

USB Controller

Technical information on the Cypress enCoRe USB controller is contained in the CY7C63723 Data Sheet. The enclosed “Cypress Lab” CD-ROM contains the development tools for the CY7C63723. These tools will allow the designer to make changes and recompile the source code. To perform In-Circuit Emulation for easier debugging of new code development, contact Cypress to purchase the CY3654 Development Kit and the CY3654-P05 Personality Board.

Programming support and programmer adaptors for the Cypress CY7C63723-PC can be found through Cypress CY3649-xxxV + CY3083-DP48 + CY3083-07 or through most 3rd party programming companies. For further information on this product, please contact Cypress Semiconductor.

Lens

The lens technical information is contained in the HDNS2100 Data Sheet. The flange on the standard HDNS-2100 lens is for ESD protection.

LED Assembly Clip

The information on the assembly clip is contained in the Data Sheet.

The LED technical information is contained in the HLMPED80-XX000 Data Sheet and Application Note Additional application notes regarding Eye Safety Requirements are also available on Avago’s website.

Base Plate Feature File

The IGES file on the floppy disc provides recommended base plate molding features to ensure optical alignment.

Reference Design Gerber file

Sensor

Clip

Lens/Light Pipe

Figure Sectional view of PCB assembly highlighting optical mouse components optical mouse sensor, clip, lens, LED, PCB and base plate .

Base Plate Surface

HDNS-2200 Clip HLMP-ED80-XX000 LED ADNS-2620 Sensor Customer supplied PCB

HDNS-2100 Lens

Customer supplied base plate with recommended alignment features per IGES drawing

Figure Exploded view drawing of optical tracking engine with ADNS-2620 optical mouse sensor.

More datasheets: XF-00100-2015 | XF-00225-2012 | XF-00160-2120 | XF-00160-2030 | 7324-15SUBC/S400-X9 | 277200110202002 | 277200110200002 | 3579 | U5021M-NFP | CS-UDUINO-01

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADNK-2623 Datasheet file may be downloaded here without warranties.

Datasheet ID: ADNK-2623 519935