ACPM-7392-TR1

ACPM-7392-TR1 Datasheet

ACPM-7392 UTMS1700/2100 1710-1755MHz and UMTS1700 1750-1785MHz

Part	Datasheet
ACPM-7392-TR1	ACPM-7392-TR1 (pdf)

Related Parts	Information
ACPM-7392-BLK	ACPM-7392-BLK

PDF Datasheet Preview
ACPM-7392 UTMS1700/2100 1710-1755MHz and UMTS1700 1750-1785MHz Data Sheet The ACPM-7392 is a fully matched 10-pin surface mount module developed for UMTS Band4 and Band9. This power amplifier module operates in the 1710-1785MHz bandwidth. The ACPM-7392 meets stringent UMTS linearity requirements up to 28.4dBm output power in band4 and 28.0dBm output power in band9. The 4mmx4mm form factor package is self contained, incorporating 50ohm input and output matching networks The ACPM-7392 features 5th generation of CoolPAM circuit technology which supports 3 power modes bypass, mid and high power modes. The CoolPAM is stage bypass technology enhancing PAE power added efficiency at low and medium power range. Active bypass feature is added to 5th generation to enhance PAE further at low output range. This helps to extend talk time. The power amplifier is manufactured on an advanced InGaP HBT hetero-junction Bipolar Transistor MMIC microwave monolithic integrated circuit technology offering state-of-the-art reliability, temperature stability and ruggedness. • Thin Package 0.9mm typ • Excellent Linearity • 3-mode power control with Vbp and Vmode Bypass / Mid Power Mode / High Power Mode • High Efficiency at max output power • 10-pin surface mounting package • Internal 50ohm matching networks for both RF input and output • Lead-free, RoHS compliant, Green • UMTS Band4 and Band9 Ordering Information Part Number ACPM-7392-TR1 ACPM-7392-BLK Number of Devices 1,000 Container 178mm 7” Tape/Reel BULK Block Diagram Vcc1 1 Vcc2 10 Bias Circuit & Control Logic Ven 5 Vmode 4 Vbp 3 RF In 2 Input Match & Power Divider Inter-Stage Match Output Match Bypass Circuit Impedence Transformer RF Out 8 Absolute Maximum Ratings No damage assuming only one parameter is set at limit at a time with all other parameters set at or below nominal value. Operation of any single parameter outside these conditions with the remaining parameters set at or below nominal values may result in permanent damage Min. Typ. RF Input Power Pin DC Supply Voltage Vcc1, Vcc2 Enable Voltage Ven Mode Control Voltage Vmode Bypass Control Vbp Storage Temperature Tstg * High Power Mode 5dBm for Bypass and Mid Power Mode Max. Unit +125 Recommended Operating Condition Min. Typ. DC Supply Voltage Vcc1, Vcc2 Enable Voltage Ven Low High Mode Control Voltage Vmode High Bypass Control Voltage Vbp High Operating Frequency fo 1710 Ambient Temperature Ta

PDF Datasheet Preview

ACPM-7392 UTMS1700/2100 1710-1755MHz and UMTS1700 1750-1785MHz

Data Sheet

The ACPM-7392 is a fully matched 10-pin surface mount module developed for UMTS Band4 and Band9. This power amplifier module operates in the 1710-1785MHz bandwidth. The ACPM-7392 meets stringent UMTS linearity requirements up to 28.4dBm output power in band4 and 28.0dBm output power in band9. The 4mmx4mm form factor package is self contained, incorporating 50ohm input and output matching networks

The ACPM-7392 features 5th generation of CoolPAM circuit technology which supports 3 power modes bypass, mid and high power modes. The CoolPAM is stage bypass technology enhancing PAE power added efficiency at low and medium power range. Active bypass feature is added to 5th generation to enhance PAE further at low output range. This helps to extend talk time.

The power amplifier is manufactured on an advanced InGaP HBT hetero-junction Bipolar Transistor MMIC microwave monolithic integrated circuit technology offering state-of-the-art reliability, temperature stability and ruggedness.
• Thin Package 0.9mm typ
• Excellent Linearity
• 3-mode power control with Vbp and Vmode

Bypass / Mid Power Mode / High Power Mode
• High Efficiency at max output power
• 10-pin surface mounting package
• Internal 50ohm matching networks for both RF input
and output
• Lead-free, RoHS compliant, Green
• UMTS Band4 and Band9
Ordering Information

Part Number ACPM-7392-TR1 ACPM-7392-BLK

Number of Devices 1,000

Container 178mm 7” Tape/Reel BULK

Block Diagram

Vcc1 1 Vcc2 10

Bias Circuit & Control Logic

Ven 5 Vmode 4 Vbp 3

RF In 2

Input Match & Power Divider

Inter-Stage Match

Output Match

Bypass Circuit

Impedence Transformer

RF Out 8

Absolute Maximum Ratings

No damage assuming only one parameter is set at limit at a time with all other parameters set at or below nominal value. Operation of any single parameter outside these conditions with the remaining parameters set at or below nominal values may result in permanent damage

Min.

Typ.

RF Input Power Pin

DC Supply Voltage Vcc1, Vcc2

Enable Voltage Ven

Mode Control Voltage Vmode

Bypass Control Vbp

Storage Temperature Tstg
* High Power Mode 5dBm for Bypass and Mid Power Mode

Max.

Unit
+125

Recommended Operating Condition

Min.

Typ.

DC Supply Voltage Vcc1, Vcc2

Enable Voltage Ven Low High

Mode Control Voltage Vmode

High

Bypass Control Voltage Vbp

High

Operating Frequency fo
1710

Ambient Temperature Ta

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACPM-7392-TR1 Datasheet file may be downloaded here without warranties.

Datasheet ID: ACPM-7392-TR1 519890