ACPL-M51L 1MBd Low Supply Voltage Digital Optocoupler
|PDF Datasheet Preview|
|ACPL-M51L 1MBd Low Supply Voltage Digital Optocoupler|
Lead Pb Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product
The ACPL-M51L single-channel in SO-5 footprint , is low power, low supply voltage 1MBd digital optocoupler, configurable as a 4pin device.
This digital optocoupler use an insulating layer between the light emitting diode and an integrated photon detector to provide electrical insulation between input and output.
ACPL-M51L has an increased common mode transient immunity of 15kV/µs minimum at VCM = 1500V.
The current transfer ratio CTR is 140% typical for ACPLM51L at IF = 3.0mA. This digital optocoupler can be use in any TTL/CMOS, TTL/LSTTL or analog applications.
Anode 1 Cathode 3
6 VCC 5 VO 4 GND
Anode 1 Cathode 3
6 5 4 GND
Truth Table LED Vo
ON LOW OFF HIGH
• Wide supply voltage VCC 2.25V to 24V
• Low Drive Current 3.0mA
• Open-Collector Output
• TTL compatible 5-pin configuration
• Compact SO-5 package
• 15 kV/us High Common-Mode Rejection at VCM =
• Guaranteed performance within temperature range:
-40°C to +105°C
• Low Propagation Delay 1us max at 5V
• Worldwide Safety Approval:
- UL1577 recognized, 3750Vrms/1min - CSA Approval - IEC/EN/DIN EN 60747-5-5 Approval for Reinforced
• Communications Interface
• Digital Signal Isolation
• MCU Interface
• Feedback Elements in Switching Power Supplies
• Digital isolation for A/D, D/A conversion Digital field
A 0.1uF bypass capacitor must be connected between pins VCC and GND. 4-pin configuration Pins 5 and 6 are externally shorted
CAUTION It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. The components featured in this datasheet are not to be used in military or aerospace applications or environments.
ACPL-M51L is UL Recognized with 3750 Vrms for 1 minute per UL1577.
Part Number ACPL-M51L
Options RoHS Compliant
-000E -060E -500E -560E
Tape & Reel
IEC/EN/DIN EN 60747-5-5
Quantity 100 per tube 100 per tube 1500 per reel 1500 per reel
To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1 ACPL-M51L-560E to order product of Small Outline SO-5 package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Package Outline Drawings ACPL-M51L Small Outline SO-5 Package JEDEC MO-155
M51L YWW XXX
Dimensions in Millimeters Inches * Maximum mold ash on each side is mm Note Floating lead protrusion is mm 6 mils max.
7° MAX. MAX. LEAD COPLANARITY =
Solder Reflow Profile
The ACPL-M51L is approved by the following organizations:
Approval under UL 1577, component recognition program up to VISO = 3750 VRMS File E55361.
CSA Approval under CSA Component Acceptance Notice #5, File CA
IEC/EN/DIN EN 60747-5-5 Option 060E only
Insulation and Safety Related Specifications
Minimum External Air Gap Clearance
Minimum External Tracking Creepage
Minimum Internal Plastic Gap Internal Clearance
Tracking Resistance Comparative Tracking Index
|More datasheets: 5MFP 500 | 5MFP 300 | 5MFP 250 | 5MFP 200 | 5MFP 125 | 5MFP 100 | 5MFP 7 | B65811F0500A048 | ACPL-M51L-060E | ACPL-M51L-500E|
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACPL-M51L-560E Datasheet file may be downloaded here without warranties.