4N35-W60E

4N35-W60E Datasheet

4N35 Phototransistor Optocoupler General Purpose Type

Part	Datasheet
4N35-W60E	4N35-W60E (pdf)

Related Parts	Information
4N35-300E	4N35-300E
4N35-360E	4N35-360E
4N35-560E	4N35-560E
4N35-500E	4N35-500E
4N35-060E	4N35-060E
4N35-W00E	4N35-W00E
4N35-000E	4N35-000E

PDF Datasheet Preview
4N35 Phototransistor Optocoupler General Purpose Type Data Sheet Lead Pb Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product The 4N35 is an optocoupler for general purpose applications. It contains a light emitting diode optically coupled to a photo-transistor. It is packaged in a 6-pin DIP package and available in wide-lead spacing option and lead bend SMD option. Response time, tr, is typically 3 µs and minimum CTR is 100% at input current of 10 mA. Applications • I/O interfaces for computers • System appliances, measuring instruments • Signal transmission between circuits of different potentials and impedances Functional Diagram PIN NO. AND INTERNAL CONNECTION DIAGRAM Features • High Current Transfer Ratio CTR min. 100% at IF = 10 mA, VCE = 10 V • Response time tr typ., 3 µs at VCE = 10 V, IC = 2 mA, RL = 100 • Input-output isolation voltage Viso = 3550 Vrms • Dual-in-line package • UL approved • CSA approved • IEC/EN/DIN EN 60747-5-2 approved • Options available: Leads with mm spacing W00 Leads bends for surface mounting 300 Tape and reel for SMD 500 IEC/EN/DIN EN 60747-5-2 approvals 060 Schematic ANODE CATHODE NC EMITTER COLLECTOR BASE 1 IF ANODE + VF CATHODE 2 6 BASE IC 5 COLLECTOR 4 EMITTER CAUTION It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Ordering Information 4N35-xxxx is UL Recognized with 3550 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5, File CA RoHS Component Option Part Rank '0' Number 100%<CTR Package Surface Gull Tape IEC/EN/DIN Mount Wing & Reel EN 60747-5-2 Quantity -000E 300 mil DIP-6 65 pcs per tube -300E 300 mil DIP-6 65 pcs per tube -500E 300 mil DIP-6 1000 pcs per reel 4N35 -060E 300 mil DIP-6 65 pcs per tube -360E 300 mil DIP-6 65 pcs per tube -560E 300 mil DIP-6 1000 pcs per reel -W00E 400 mil DIP-6 65 pcs per tube -W60E 400 mil DIP-6 65 pcs per tube To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: 4N35-360E to order product of 300 mil DIP-6 DC Gull Wing Surface Mount package in Tube packaging with 100%<CTR, IEC/EN/DIN EN 60767-5-2 Safety Approval and RoHS compliant. Example 2: 4N35-W00E to order product of 400 mil DIP-6 DC package in Tube packaging with 100%<CTR and RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Outline Drawings 4N35-000E

PDF Datasheet Preview

4N35 Phototransistor Optocoupler General Purpose Type

Data Sheet

Lead Pb Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product

The 4N35 is an optocoupler for general purpose applications. It contains a light emitting diode optically coupled to a photo-transistor. It is packaged in a 6-pin DIP package and available in wide-lead spacing option and lead bend SMD option. Response time, tr, is typically 3 µs and minimum CTR is 100% at input current of 10 mA.

Applications
• I/O interfaces for computers
• System appliances, measuring instruments
• Signal transmission between circuits of different
potentials and impedances

Functional Diagram

PIN NO. AND INTERNAL CONNECTION DIAGRAM

Features
• High Current Transfer Ratio

CTR min. 100% at IF = 10 mA, VCE = 10 V
• Response time
tr typ., 3 µs at VCE = 10 V, IC = 2 mA, RL = 100
• Input-output isolation voltage

Viso = 3550 Vrms
• Dual-in-line package
• UL approved
• CSA approved
• IEC/EN/DIN EN 60747-5-2 approved
• Options available:

Leads with mm spacing W00 Leads bends for surface mounting 300 Tape and reel for SMD 500 IEC/EN/DIN EN 60747-5-2 approvals 060

Schematic

ANODE CATHODE NC

EMITTER COLLECTOR BASE
1 IF ANODE
+ VF CATHODE 2
6 BASE

IC 5 COLLECTOR
4 EMITTER

CAUTION It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.
Ordering Information
4N35-xxxx is UL Recognized with 3550 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5, File CA

RoHS Component Option

Part

Rank '0'

Number 100%<CTR

Package

Surface Gull Tape IEC/EN/DIN Mount Wing & Reel EN 60747-5-2

Quantity
-000E
300 mil DIP-6
65 pcs per tube
-300E
300 mil DIP-6
65 pcs per tube
-500E
300 mil DIP-6
1000 pcs per reel
4N35
-060E
300 mil DIP-6
65 pcs per tube
-360E
300 mil DIP-6
65 pcs per tube
-560E
300 mil DIP-6
1000 pcs per reel
-W00E
400 mil DIP-6
65 pcs per tube
-W60E
400 mil DIP-6
65 pcs per tube

To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry.

Example 1:
4N35-360E to order product of 300 mil DIP-6 DC Gull Wing Surface Mount package in Tube packaging with 100%<CTR, IEC/EN/DIN EN 60767-5-2 Safety Approval and RoHS compliant.

Example 2:
4N35-W00E to order product of 400 mil DIP-6 DC package in Tube packaging with 100%<CTR and RoHS compliant.

Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.

Package Outline Drawings 4N35-000E

More datasheets: 5855556 | DM74ALS564AWMX | DM74ALS564AWM | DM74ALS564AN | M3707 SL002 | M3707 SL005 | M3707 SL001 | 4N35-300E | 4N35-360E | 4N35-560E

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 4N35-W60E Datasheet file may be downloaded here without warranties.

Datasheet ID: 4N35-W60E 519845