BXRA-30E2000-B-00

BXRA-30E2000-B-00 Datasheet


BXRA-xxx0800, BXRA-xxx1200, BXRA-xxx2000, BXRA-40Exxxx, BXRA-5xC1100, BXRA-5xC1600, BXRA-5xC2600

Part Datasheet
BXRA-30E2000-B-00 BXRA-30E2000-B-00 BXRA-30E2000-B-00 (pdf)
Related Parts Information
BXRA-27E2000-B-00 BXRA-27E2000-B-00 BXRA-27E2000-B-00
BXRA-40E0950-B-00 BXRA-40E0950-B-00 BXRA-40E0950-B-00
BXRA-27E1200-B-00 BXRA-27E1200-B-00 BXRA-27E1200-B-00
BXRA-30E1200-B-00 BXRA-30E1200-B-00 BXRA-30E1200-B-00
BXRA-35E1200-B-00 BXRA-35E1200-B-00 BXRA-35E1200-B-00
BXRA-27G1200-B-00 BXRA-27G1200-B-00 BXRA-27G1200-B-00
BXRA-40E1350-B-00 BXRA-40E1350-B-00 BXRA-40E1350-B-00
BXRA-30G0800-B-00 BXRA-30G0800-B-00 BXRA-30G0800-B-00
BXRA-30G1200-B-00 BXRA-30G1200-B-00 BXRA-30G1200-B-00
BXRA-27G0800-B-00 BXRA-27G0800-B-00 BXRA-27G0800-B-00
BXRA-35E0800-B-00 BXRA-35E0800-B-00 BXRA-35E0800-B-00
BXRA-30E0800-B-00 BXRA-30E0800-B-00 BXRA-30E0800-B-00
BXRA-40E2200-B-00 BXRA-40E2200-B-00 BXRA-40E2200-B-00
BXRA-30G2000-B-00 BXRA-30G2000-B-00 BXRA-30G2000-B-00
BXRA-27E0800-B-00 BXRA-27E0800-B-00 BXRA-27E0800-B-00
BXRA-35E2000-B-00 BXRA-35E2000-B-00 BXRA-35E2000-B-00
BXRA-27G2000-B-00 BXRA-27G2000-B-00 BXRA-27G2000-B-00
PDF Datasheet Preview
Bridgelux ES Rectangle Array Series

Product Data Sheet DS24

BXRA-xxx0800, BXRA-xxx1200, BXRA-xxx2000, BXRA-40Exxxx, BXRA-5xC1100, BXRA-5xC1600, BXRA-5xC2600

Introduction

The Bridgelux family of LED Array products delivers high performance, compact and cost-effective solidstate lighting solutions to serve the general lighting market. These products combine the higher efficacy, lifetime, and reliability benefits of LEDs with the light output levels of many conventional lighting sources. The Bridgelux ES Array Series enables lamp and luminaire designs surpassing efficacy and quality of light requirements driven by regulatory standards with reasonable system design margins, enabling lighting product compliance to Energy Star, DLC, Title 24, Part L and other global standards.

The Bridgelux ES Array products are a high performance alternative to conventional solid state solutions, delivering between 700 and 3000 lumens under application conditions in warm, neutral and cool white color temperatures. These compact high flux density light sources deliver uniform high quality illumination without pixilation or the multiple shadow effect caused by LED component based solutions. To simplify system design for appropriate light output, Bridgelux LED Arrays are specified to deliver performance under typical use conditions.

These integrated plug and play solutions reduce system complexity and enable miniaturized costeffective lamp and luminaire designs. Lighting system designs incorporating these LED Arrays deliver comparable performance to that of 60-200 Watt incandescent and halogen, 7-42 Watt compact fluorescent, and 18-50 Watt HID based luminaires and feature increased system level efficacy and service life. Typical applications include replacement lamps, task, accent, spot, retail, track, down light, low bay, wide area, security, wall pack and street lighting.
• Compact high flux density light source
• Uniform high quality illumination
• Minimum 70, 80 and 90 CRI options
• Streamlined thermal path
• Energy Star / ANSI compliant color
binning structure with 3SDCM options
• More energy efficient than incandescent,
halogen and fluorescent lamps
• Low voltage DC operation
• Instant light with unlimited dimming
• 5-Year warranty
• RoHS compliant and Pb free
• Enhanced optical control
• Clean white light without pixilation
• High quality true color reproduction
• Significantly reduced thermal resistance
and increased operating temperatures
• Uniform consistent white light
• Lower operating costs
• Increased safety
• Easy to use with daylight and motion
detectors to enable increased energy savings
• Reduced maintenance costs
• Environmentally friendly, no disposal issue
101 Portola Avenue, Livermore, CA 94551
• Tel 925 583-8400
• Fax 925 583-8401


Table of Contents

Product Nomenclature Average Lumen Maintenance Characteristics IES LM-80 Test Data Environmental Compliance UL Recognition Minor Product Change Policy Cautionary Statements Case Temperature Measurement Point Selection Guide The following configurations are available Flux Characteristics Optical Characteristics Electrical Characteristics Absolute Minimum and Maximum Ratings Absolute Minimum and Maximum Ratings continued Typical Performance at Alternative Drive Currents Typical Performance at Alternative Drive Currents continued Mechanical Dimensions Typical Radiation Pattern Wavelength Characteristics at Rated Test Current, Tj=25°C Typical Light Output Characteristics vs. Temperature Typical Chromaticity Characteristics vs. Temperature Forward Current Characteristics Forward Current Characteristics continued Color Binning Information Design Resources
3 4 5 6 9 10 11 12 13 14 15 16 17 19 20 21 22 23 26

Bridgelux ES Rectangle Array Series Product Data Sheet DS24 10/11/12

Page 2 of 27

Product Nomenclature

The part number designation for Bridgelux LED Arrays is explained as follows:

BXRA AB C DEFG H IJ - KLM

Where BXRA Designates product family AB Designates the nominal ANSI color temperature 27 = 2700K 30 = 3000K, etc. C - Designates minimum CRI C = 70, E = 80, G = 90 DEFG - Designates Nominal Flux 0800 = 800lm, 1200 = 1200lm, 2000 = 2000lm, etc. H Designates array configuration IJ Designates CCT Bin options 3000K as an example 00 = Full ANSI Q3, Q4, R3, R4 03 = 3 SDCM KLM Designates wire option

Average Lumen Maintenance Characteristics

Bridgelux projects that its family of LED Array products will deliver, on average, greater than 70% lumen maintenance after 50,000 hours of operation at the rated forward test current. This performance assumes constant current operation with case temperature maintained at or below 85°C. For use beyond these typical operating conditions please consult your Bridgelux sales representative for further assistance.

These projections are based on a combination of package test data, semiconductor chip reliability data, a fundamental understanding of package related degradation mechanisms, and performance observed from products installed in the field using Bridgelux die technology. Bridgelux conducts lumen maintenance tests per LM80. Observation of design limits is required in order to achieve this projected lumen maintenance.

IES LM-80 Test Data

Bridgelux has carried out extensive testing on multiple LED arrays according to the IES LM-80 test protocols. LM80 data is available to support all BXRA LED array products.

The IES LM-80 qualification test method is required for an LED light source. The LM-80 test method does not apply to an LED luminaire light fixture. LM-80 is a rigorous test procedure that has been designed to provide LED light source test data to support an ENERGY STAR rating for a luminaire light fixture.

When a manufacturer requires an ENERGY STAR rating for a fixture, the manufacture must have the luminaire light fixture tested to LM-79 by an accredited test facility. This test ensures that the fixture meets the photometric performance required for the ENERGY STAR rating under the specified operating conditions of the fixture.

The fixture manufacturer must provide an LM-80 report with the appropriate test data to support the
operating conditions of the fixture that is to be submitted. Bridgelux can supply an LM-80 report for
specific requests, contact your local Bridgelux sales representative.

Bridgelux ES Rectangle Array Series Product Data Sheet DS24 10/11/12

Page 3 of 27

Environmental Compliance

Bridgelux is committed to providing environmentally friendly products to the solid-state lighting market. Bridgelux LED Arrays comply with the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS directive. Bridgelux does not intentionally add the following restricted materials to LED Array products lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls PBB or polybrominated diphenyl ethers PBDE .

UL Recognition

Bridgelux secures UL Recognition for all the LED Array products. Please refer to the UL file E333389 for the latest list of UL Recognized Arrays. Bridgelux uses UL Recognized materials with suitable flammability ratings in the LED Array to streamline the process for customers to secure UL listing of the final luminaire product. Bridgelux recommends that luminaires are designed with a Class 2 Driver to facilitate the UL listing process.
More datasheets: BXRA-40E1350-B-00 | BXRA-30G0800-B-00 | BXRA-30G1200-B-00 | BXRA-27G0800-B-00 | BXRA-35E0800-B-00 | BXRA-30E0800-B-00 | BXRA-40E2200-B-00 | BXRA-30G2000-B-00 | BXRA-27E0800-B-00 | BXRA-35E2000-B-00


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BXRA-30E2000-B-00 Datasheet file may be downloaded here without warranties.

Datasheet ID: BXRA-30E2000-B-00 522340