BXRE-27G1000-B-03

BXRE-27G1000-B-03 Datasheet


Product Data Sheet DS42 BXRE-xxx1000-B

Part Datasheet
BXRE-27G1000-B-03 BXRE-27G1000-B-03 BXRE-27G1000-B-03 (pdf)
Related Parts Information
BXRE-30G1000-B-03 BXRE-30G1000-B-03 BXRE-30G1000-B-03
BXRE-40G1000-B-03 BXRE-40G1000-B-03 BXRE-40G1000-B-03
BXRE-27E1000-B-03 BXRE-27E1000-B-03 BXRE-27E1000-B-03
BXRE-50C1000-B-04 BXRE-50C1000-B-04 BXRE-50C1000-B-04
BXRE-40E1000-B-03 BXRE-40E1000-B-03 BXRE-40E1000-B-03
BXRE-30E1000-B-03 BXRE-30E1000-B-03 BXRE-30E1000-B-03
PDF Datasheet Preview
Bridgelux V10 Array Series

Product Data Sheet DS42 BXRE-xxx1000-B

Introduction

The Bridgelux V10 LED Array products deliver high quality light in a compact and cost-effective solid-state lighting solution. These products can be efficiently driven at twice the normal current, enabling design flexibility not previously possible. This high flux density light source is designed to enable a wide range of high quality, low cost 750 to 2,000 lumen directional luminaires and replacement lamps for commercial and residential applications.

The V10 LED Array light engine is available in multiple electrical, CCT and CRI combinations providing considerable design-in flexibility and energy efficiencies.

Lighting system designs incorporating these LED Arrays deliver comparable performance to that of 150 Watt incandescent and halogen and 26 Watt compact fluorescent based luminaires they provide increased system level efficacy and longer service life. Typical applications include replacement lamps, task, accent, spot, track, down light, wide area, security, and wall pack.
• Compact high flux density light source
• Uniform high quality illumination
• Minimum 70, 80 and 90 CRI options
• Streamlined thermal path
• Energy Star / ANSI compliant color binning
structure with 3SDCM options
• More energy efficient than incandescent,
halogen and fluorescent lamps
• Low voltage DC operation
• Instant light with unlimited dimming
• 5-Year warranty
• RoHS compliant and Pb free
• Enhanced optical control
• Clean white light without pixilation
• High quality true color reproduction
• Significantly reduced thermal resistance and
increased operating temperatures
• Uniform consistent white light
• Lower operating costs
• UL Recognized
• Easy to use with daylight and motion
detectors to enable increased energy savings
• Reduced maintenance costs
• Environmentally friendly, no disposal issue
• CEC compliant versions available
101 Portola Avenue, Livermore, CA 94551
• Tel 925 583-8400
• Fax 925 583-8401


Table of Contents

Typical Product Features Product Nomenclature Lumen Maintenance Characteristics Environmental Compliance UL Recognition CE Recognition Minor Product Change Policy Case Temperature Measurement Point Cautionary Statements Selection Guide Typical Performance at Alternative Drive Currents Flux Characteristics Electrical Characteristics Absolute Maximum Ratings Current versus Forward Voltage Characteristics Typical Luminous Flux vs. Current Typical Chromaticity Characteristics vs. Temperature Typical Radiation Pattern Mechanical Dimensions Color Binning Information Design Resources About Bridgelux
3 4 5 6 7 8 9 10 11 12 13 15 17 18 21 22

Bridgelux V10 Array Product Data Sheet DS42 4/1/2014

Page 2 of 22

Typical Product Features

Bridgelux arrays are fully engineered devices that provide consistent thermal and optical performance on an engineered mechanical platform. The V10 array is the smallest chip-on-board device across all of Bridgelux’s LED Array products. The arrays incorporate several features to simplify design integration and assembly.

Figure 1 Array Features

Fully engineered substrate for consistent thermal, mechanical and optical properties

Polarity symbols

Solder Pads

Yellow phosphor Light Emitting Surface LES

White ring around LES

Case Temperature Tc Measurement Point

Note Part number and lot codes are scribed on back of array

Product Nomenclature

The part number designation for Bridgelux LED Arrays is explained as follows:

BXRE AB C DEFG H IJ

Where:

B X R E Designates product family

A B Designates the nominal ANSI color temperature 27 = 2700K 30 = 3000K, etc.

C - Designates minimum CRI C = 70, E = 80, G = 90

D E F G - Designates Nominal Flux 1000 = 1000 lumen etc.

H Designates configuration

I J Designates CCT color binning 03 = 3SDCM or 3-step 04 = 4SDCM or 4-step

Bridgelux V10 Array Product Data Sheet DS42 4/1/2014

Page 3 of 22

Lumen Maintenance Characteristics
More datasheets: T5750-6AQJ-66 | 10824R | FPN660A_D26Z | FPN660 | FPN660A | FPN660A_D27Z | FPN660A_D75Z | BXRE-30G1000-B-03 | BXRE-40G1000-B-03 | BXRE-27E1000-B-03


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BXRE-27G1000-B-03 Datasheet file may be downloaded here without warranties.

Datasheet ID: BXRE-27G1000-B-03 522337