BXRE-27E0500-A-03

BXRE-27E0500-A-03 Datasheet


BXRE-xxx0800-A, BXRE-xxx0800-B Introduction

Part Datasheet
BXRE-27E0500-A-03 BXRE-27E0500-A-03 BXRE-27E0500-A-03 (pdf)
Related Parts Information
BXRE-30E0500-A-03 BXRE-30E0500-A-03 BXRE-30E0500-A-03
BXRE-27E0800-B-03 BXRE-27E0800-B-03 BXRE-27E0800-B-03
BXRE-27G0800-A-03 BXRE-27G0800-A-03 BXRE-27G0800-A-03
BXRE-30E0800-B-03 BXRE-30E0800-B-03 BXRE-30E0800-B-03
BXRE-40E0800-B-03 BXRE-40E0800-B-03 BXRE-40E0800-B-03
BXRE-27G0800-B-03 BXRE-27G0800-B-03 BXRE-27G0800-B-03
BXRE-30E0800-A-03 BXRE-30E0800-A-03 BXRE-30E0800-A-03
BXRE-30G0500-A-03 BXRE-30G0500-A-03 BXRE-30G0500-A-03
BXRE-30G0800-A-03 BXRE-30G0800-A-03 BXRE-30G0800-A-03
BXRE-40E0500-A-03 BXRE-40E0500-A-03 BXRE-40E0500-A-03
BXRE-40E0800-A-03 BXRE-40E0800-A-03 BXRE-40E0800-A-03
BXRE-50C0500-A-04 BXRE-50C0500-A-04 BXRE-50C0500-A-04
BXRE-50C0800-A-04 BXRE-50C0800-A-04 BXRE-50C0800-A-04
BXRE-50C0800-B-04 BXRE-50C0800-B-04 BXRE-50C0800-B-04
BXRE-27E0800-A-03 BXRE-27E0800-A-03 BXRE-27E0800-A-03
BXRE-30G0800-B-03 BXRE-30G0800-B-03 BXRE-30G0800-B-03
PDF Datasheet Preview
Bridgelux V8 Array Series

Product Data Sheet DS41

BXRE-xxx0800-A, BXRE-xxx0800-B Introduction

The Bridgelux V8 LED Array products delivers high quality light in a compact and cost-effective solid-state lighting solution. These products can be efficiently driven at twice the normal current, enabling design flexibility not previously possible. This high flux density light source is designed to enable a wide range of sub 1000 lumen directional luminaires and replacement lamps for commercial and residential applications.

The V8 LED Array light engine is available in multiple electrical, CCT and CRI combinations providing considerable design-in flexibility and energy efficiencies.

Lighting system designs incorporating these LED Arrays deliver comparable performance to that of 40-75 Watt incandescent and halogen and 7-13 Watt compact fluorescent based luminaires they provide increased system level efficacy and longer service life. Typical applications include replacement lamps, task, accent, spot, track, down light, wide area, security, and wall pack.
• Compact high flux density light source
• Uniform high quality illumination
• Minimum 70, 80 and 90 CRI options
• Streamlined thermal path
• Energy Star / ANSI compliant color binning structure
with 3SDCM options
• More energy efficient than incandescent, halogen
and fluorescent lamps
• Low voltage DC operation
• Instant light with unlimited dimming
• 5-Year warranty
• RoHS compliant and Pb free

Benefits
• Enhanced optical control
• Clean white light without pixilation
• High quality true color reproduction
• Significantly reduced thermal resistance and increased operating temperatures
• Uniform consistent white light
• Lower operating costs
• UL Recognized
• Easy to use with daylight and motion detectors to enable increased energy savings
• Reduced maintenance costs
• Environmentally friendly, no disposal issue
• CEC compliant versions available
101 Portola Avenue, Livermore, CA 94551
• Tel 925 583-8400
• Fax 925 583-8401


Table of Contents

Typical Product Features Product Nomenclature Lumen Maintenance Characteristics Environmental Compliance UL Recognition CE Recognition Minor Product Change Policy Case Temperature Measurement Point Cautionary Statements Selection Guide Typical Performance at Alternative Drive Currents Flux Characteristics Electrical Characteristics Absolute Maximum Ratings Current versus Forward Voltage Characteristics Typical Luminous Flux vs. Current Typical Chromaticity Characteristics vs. Temperature Typical Radiation Pattern Mechanical Dimensions Color Binning Information Design Resources About Bridgelux
3 4 5 6 7 9 10 11 12 14 15 17 19 20 23 24

Bridgelux V8 Array Product Data Sheet DS41 10/11/2013

Page 2 of 24

Typical Product Features

Bridgelux arrays are fully engineered devices that provide consistent thermal and optical performance on an engineered mechanical platform. The V8 array is the smallest chip-on-board device across all of Bridgelux’s LED Array products. The arrays incorporate several features to simplify design integration and assembly.

Figure 1 Array Features

Fully engineered substrate for consistent thermal, mechanical and optical properties

Yellow phosphor Light Emitting Surface LES

Polarity symbols

Solder Pads

White ring around LES Case Temperature Tc Measurement Point

Note Part number and lot codes are scribed on back of array

Product Nomenclature

The part number designation for Bridgelux LED Arrays is explained as follows BXRE AB C DEFG H IJ Where:

B X R E Designates product family A B Designates the nominal ANSI color temperature 27 = 2700K 30 = 3000K, etc. C - Designates minimum CRI C = 70, E = 80, G = 90 D E F G - Designates Nominal Flux 0500 = 500lm, 0800 = 800lm, etc. H Designates configuration I J Designates CCT color binning
03 = 3SDCM or 3-step 04 = 4SDCM or 4-step

Bridgelux V8 Array Product Data Sheet DS41 10/11/2013

Page 3 of 24

Lumen Maintenance Characteristics

Bridgelux projects that its family of LED Array products will deliver, on average, greater than 70% lumen maintenance after 50,000 hours of operation at the rated forward test current. This performance assumes constant current operation at the nominal drive current with case temperature maintained at or below 85°C. For use beyond these typical operating conditions please consult your Bridgelux sales representative for further assistance.

These projections are based on a combination of package test data, semiconductor chip reliability data, a fundamental understanding of package related degradation mechanisms, and performance observed from products installed in the field using Bridgelux die technology. Bridgelux conducts lumen maintenance tests per LM80. Observation of design limits is required in order to achieve this projected lumen maintenance.

Environmental Compliance

Bridgelux is committed to providing environmentally friendly products to the solid state lighting market. Bridgelux LED Arrays comply with the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS directive. Bridgelux does not intentionally add the following restricted materials to LED Array products lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls PBB or polybrominated diphenyl ethers PBDE .

UL Recognition

Bridgelux secures UL recognition for all the LED Array products. Please refer to the UL file E350613 for the latest list of UL recognized Arrays. Bridgelux uses UL recognized materials with suitable flammability ratings in the LED Array to streamline the process for customers to secure UL listing of the final luminaire product.

CE Recognition

In accordance with the relevant European Union directives, the family of LED Array products conform to the applicable requirements of the IEC/EN 62031:2008 LED Modules for General Lighting Safety Specifications and IEC 62471:2006 Photobiological Safety of Lamps and Lamp Systems . Bridgelux maintains a CE Declaration of Conformity statement on its website and displays the CE mark on product packing labels.

Minor Product Change Policy
More datasheets: MSA-0686-BLKG | AFBR-0549Z | AFBR-0550Z | 26546805 | 26546803 | BXRE-30E0500-A-03 | BXRE-27E0800-B-03 | BXRE-27G0800-A-03 | BXRE-30E0800-B-03 | BXRE-40E0800-B-03


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BXRE-27E0500-A-03 Datasheet file may be downloaded here without warranties.

Datasheet ID: BXRE-27E0500-A-03 522336