TISP1082F3SL

TISP1082F3SL Datasheet

TISP1072F3,TISP1082F3

Part	Datasheet
TISP1082F3SL	TISP1082F3SL (pdf)

Related Parts	Information
TISP1082F3P	TISP1082F3P
TISP1072F3SL	TISP1072F3SL
TISP1072F3P	TISP1072F3P

PDF Datasheet Preview
TISP1072F3,TISP1082F3 DUAL FORWARD-CONDUCTING UNIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS TISP1xxxF3 Overvoltage Protector Series Ion-Implanted Breakdown Region Precise and Stable Voltage Low Voltage Overshoot under Surge DEVICE ‘1072F3 ‘1082F3 VDRM V - 58 - 66 V BO V - 72 - 82 Planar Passivated Junctions Low Off-State Current <10 µA Rated for International Surge Wave Shapes Waveshape Standard ITSP 2/10 µs GR-1089-CORE 80 8/20 µs IEC 61000-4-5 10/160 µs FCC Part 68 10/700 µs ITU-T K.20/21 50 FCC Part 68 10/560 µs FCC Part 68 10/1000 µs GR-1089-CORE 35 UL Recognized Component These dual forward-conducting unidirectional over-voltage protectors are designed for the overvoltage protection of ICs used for the SLIC Subscriber Line Interface Circuit function. The IC line driver section is typically powered with 0 V and a negative supply. The TISP1xxxF3 limits voltages that exceed these supply rails and is offered in two voltage variants to match typical negative supply voltage values. High voltages can occur on the line as a result of exposure to lightning strikes and a.c. power surges. Negative transients are initially limited by breakdown clamping until the voltage rises to the breakover level, which causes the device to crowbar. The high crowbar holding current prevents d.c. latchup as the current subsides. Positive transients are limited by diode forward conduction. These protectors are guaranteed to suppress and withstand the listed international lightning surges on any terminal pair. How To Order Device Package Carrier Order As D, Small-outline Tape And Reeled TISP1xxxF3DR TISP1xxxF3 P, Plastic Dip Tube TISP1xxxF3P SL, Single-in-line Tube

PDF Datasheet Preview

TISP1072F3,TISP1082F3

DUAL FORWARD-CONDUCTING UNIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

TISP1xxxF3 Overvoltage Protector Series

Ion-Implanted Breakdown Region Precise and Stable Voltage Low Voltage Overshoot under Surge

DEVICE
‘1072F3 ‘1082F3

VDRM V
- 58 - 66

V BO V
- 72 - 82

Planar Passivated Junctions Low Off-State Current <10 µA

Rated for International Surge Wave Shapes

Waveshape

Standard

ITSP
2/10 µs

GR-1089-CORE 80
8/20 µs

IEC 61000-4-5
10/160 µs

FCC Part 68
10/700 µs

ITU-T K.20/21 50

FCC Part 68
10/560 µs

FCC Part 68
10/1000 µs GR-1089-CORE 35

UL Recognized Component

These dual forward-conducting unidirectional over-voltage protectors are designed for the overvoltage protection of ICs used for the SLIC Subscriber Line Interface Circuit function. The IC line driver section is typically powered with 0 V and a negative supply. The TISP1xxxF3 limits voltages that exceed these supply rails and is offered in two voltage variants to match typical negative supply voltage values.

High voltages can occur on the line as a result of exposure to lightning strikes and a.c. power surges. Negative transients are initially limited by breakdown clamping until the voltage rises to the breakover level, which causes the device to crowbar. The high crowbar holding current prevents d.c. latchup as the current subsides. Positive transients are limited by diode forward conduction. These protectors are guaranteed to suppress and withstand the listed international lightning surges on any terminal pair.

How To Order

Device

Package

Carrier

Order As

D, Small-outline Tape And Reeled TISP1xxxF3DR

TISP1xxxF3 P, Plastic Dip

Tube

TISP1xxxF3P

SL, Single-in-line

Tube

More datasheets: FPF2503 | FPF2502 | FPF2506 | FPF2505 | FPF2501 | FPF2500 | 76000786 | TISP1082F3P | TISP1072F3SL | TISP1072F3P

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TISP1082F3SL Datasheet file may be downloaded here without warranties.

Datasheet ID: TISP1082F3SL 522307