MF-VS170S-0

MF-VS170S-0 Datasheet

MF-VS Series - PTC Resettable Fuses

Part	Datasheet
MF-VS170S-0	MF-VS170S-0 (pdf)

Related Parts	Information
MF-VS170SS-0	MF-VS170SS-0
MF-VS210S-0	MF-VS210S-0
MF-VS210SS-0	MF-VS210SS-0

PDF Datasheet Preview
RoHS COMPLIANT 20V18SS210 • Axial leaded • Fully compatible with current industry standards • Weldable nickel terminals • Very low internal resistance • Low switching temperature • Agency recognition: • RoHS compliant The slotted lead option is currently available but not, recommended for new designs. MF-VS Series - PTC Resettable Fuses Electrical Characteristics Model V max. I max. Volts Amps MF-VS170 MF-VS210 Ihold Itrip Amperes at 23 °C Hold Trip Initial Resistance Min. Ohms at 23 °C Max. Typ. 1 Hour R1 Post-Trip Resistance Ohms at 23 °C Max. Max. Time to Trip Tripped Power Dissipation Amperes Seconds at 23 °C at 23 °C Watts at 23 °C Typ. Environmental Characteristics Operating/Storage Temperature -40 °C to +85 °C Maximum Device Surface Temperature in Tripped State 125 °C Passive Aging +60 °C, 1000 ±10 % typical resistance change Humidity +60 °C, 85 % R.H.1000 hours ±10 % typical resistance change Thermal Shock MIL-STD-202F, Method 107G............................... ±5 % typical resistance change +85 °C to -40 °C, 10 times Vibration No change Condition A Test Procedures And Requirements For Model MF-VS Series Test Test Conditions Accept/Reject Criteria Visual/Mech. Verify dimensions and materials Per MF physical description In still air 23 °C Rmin R R1max Time to At current, Vmax, 23 °C......................... T max. time to trip seconds Hold Current 30 min. at Ihold No trip

PDF Datasheet Preview

*RoHS COMPLIANT
20V18SS210
• Axial leaded
• Fully compatible with current
industry standards
• Weldable nickel terminals
• Very low internal resistance
• Low switching temperature
• Agency recognition:
• RoHS compliant*

The slotted lead option is currently available but not, recommended for new designs.

MF-VS Series - PTC Resettable Fuses

Electrical Characteristics

Model

V max. I max. Volts Amps

MF-VS170

MF-VS210

Ihold

Itrip

Amperes at 23 °C

Hold

Trip

Initial Resistance

Min.

Ohms at 23 °C

Max.

Typ.
1 Hour R1 Post-Trip

Resistance

Ohms at 23 °C

Max.

Max. Time to Trip

Tripped Power Dissipation

Amperes Seconds at 23 °C at 23 °C

Watts at 23 °C

Typ.

Environmental Characteristics

Operating/Storage Temperature -40 °C to +85 °C Maximum Device Surface Temperature
in Tripped State 125 °C Passive Aging +60 °C, 1000 ±10 % typical resistance change Humidity +60 °C, 85 % R.H.1000 hours ±10 % typical resistance change Thermal Shock MIL-STD-202F, Method 107G............................... ±5 % typical resistance change
+85 °C to -40 °C, 10 times Vibration No change

Condition A

Test Procedures And Requirements For Model MF-VS Series

Test

Test Conditions

Accept/Reject Criteria

Visual/Mech. Verify dimensions and materials Per MF physical description In still air 23 °C Rmin R R1max Time to At current, Vmax, 23 °C......................... T max. time to trip seconds Hold Current 30 min. at Ihold No trip

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MF-VS170S-0 Datasheet file may be downloaded here without warranties.

Datasheet ID: MF-VS170S-0 522197