SMP4-SBC

SMP4-SBC Datasheet

PLCC4 SMD Top View Package LED SMP4-SBC, RED/GREEN

Part	Datasheet
SMP4-SBC	SMP4-SBC (pdf)

PDF Datasheet Preview
PLCC4 SMD Top View Package LED SMP4-SBC, RED/GREEN SMP4-SBC Industry Standard PLCC4 Footprint 2 Super Bright Chips in One Low Profile Package High Luminous Intensity Wide Viewing Angle High Power Efficiency Bivar SMP4 Super Bright Bi-Color LED combines two chips in a single package and is offered in an industry standard PLCC4 footprint. The SMP4 LED has a water clear lens for high luminous intensity and wide viewing angle making them ideal for outdoor illumination applications where higher ambient lighting conditions exist. The robust package is ideal for harsh working environments and can be clustered in LED arrays for maximum illumination. Low power consumption and excellent long life reliability are suitable for battery powered equipment. Bivar SMP4 LED is packaged in standard tape and reels for pick and place assemblies. Part Number SMP4-SBC Material AlGaInP Emitted Color Red Green Lumen Typ. mcd 180 115 Lens Color Water Clear Viewing Angle 120° Outline Dimensions Outline Drawings Notes All dimensions are in inches [millimeters]. Standard tolerance unless otherwise noted. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES Moisture Sensitivity Levels 4 CAUTION LOOKING DIRECTLY AT LED WITHOUT SHIELDED EYES MAY CAUSE DAMAGE TO RETINA. Bivar reserves the right to make changes at any time without notice. Bivar, Inc. 4 Thomas, Irvine, California 92618, U.S.A. Phone 949 951-8808 Fax 949 951-3974 E-mail Web: PLCC4 SMD Top View Package LED SMP4-SBC, RED/GREEN Absolute Maximum Ratings TA = 25°C unless otherwise noted Power Dissipation 72 mW 30 mA 100 mA Electrostatic Discharge Classification HBM 2000 V Derating Linear From 25°C Operating Temperature Range Storage Temperature Range Soldering Temperature 2 mA/°C -40 ~ +85°C -40 ~ +100°C 260°C Notes 10% Duty Cycle, Pulse Width msec. Solder time less than 5 seconds at temperature extreme. Electrical Characteristics TA = 25°C & IF = 20 mA unless otherwise noted Emitting Color Forward Voltage V 1 Recommend Forward Current mA VR=5V Dominant Wavelength nm 2 Luminous Intensity mcd 3

PDF Datasheet Preview

PLCC4 SMD Top View Package LED SMP4-SBC, RED/GREEN

SMP4-SBC

Industry Standard PLCC4 Footprint 2 Super Bright Chips in One Low Profile Package High Luminous Intensity Wide Viewing Angle High Power Efficiency

Bivar SMP4 Super Bright Bi-Color LED combines two chips in a single package and is offered in an industry standard PLCC4 footprint. The SMP4 LED has a water clear lens for high luminous intensity and wide viewing angle making them ideal for outdoor illumination applications where higher ambient lighting conditions exist. The robust package is ideal for harsh working environments and can be clustered in LED arrays for maximum illumination. Low power consumption and excellent long life reliability are suitable for battery powered equipment. Bivar SMP4 LED is packaged in standard tape and reels for pick and place assemblies.

Part Number SMP4-SBC

Material AlGaInP

Emitted Color Red Green

Lumen Typ. mcd 180 115

Lens Color Water Clear

Viewing Angle 120°

Outline Dimensions

Outline Drawings Notes All dimensions are in inches [millimeters]. Standard tolerance unless otherwise noted.

ATTENTION

OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC

SENSITIVE DEVICES

Moisture Sensitivity

Levels 4

CAUTION LOOKING DIRECTLY AT LED WITHOUT SHIELDED EYES MAY CAUSE DAMAGE TO RETINA.

Bivar reserves the right to make changes at any time without notice.

Bivar, Inc. 4 Thomas, Irvine, California 92618, U.S.A. Phone 949 951-8808 Fax 949 951-3974 E-mail Web:

PLCC4 SMD Top View Package LED SMP4-SBC, RED/GREEN

Absolute Maximum Ratings

TA = 25°C unless otherwise noted

Power Dissipation
72 mW
30 mA 100 mA

Electrostatic Discharge Classification HBM
2000 V

Derating Linear From 25°C Operating Temperature Range Storage Temperature Range Soldering Temperature 2
mA/°C -40 ~ +85°C -40 ~ +100°C
260°C

Notes 10% Duty Cycle, Pulse Width msec. Solder time less than 5 seconds at temperature extreme.

Electrical Characteristics

TA = 25°C & IF = 20 mA unless otherwise noted

Emitting Color

Forward Voltage V 1

Recommend Forward

Current mA

VR=5V

Dominant Wavelength nm 2

Luminous Intensity mcd 3

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SMP4-SBC Datasheet file may be downloaded here without warranties.

Datasheet ID: SMP4-SBC 521886