1009-54

1009-54 Datasheet

SIL-PAD 1000

Part	Datasheet
1009-54	1009-54 (pdf)

Related Parts	Information
1009AC-60	1009AC-60
1009-58	1009-58

PDF Datasheet Preview
HIGH PERFORMANCE Sil-Pad Sil-Pad and Sil-Pad SIL-PAD 1000 Sil-Pad 1000 has the same excellent mechanical and physical characteristics of our Sil-Pad 400 material while offering a 35% reduction in thermal resistance. Sil-Pad 1000 is a composite of silicone rubber and It is specially and offers low thermal resistance. Sil-Pad 1000 is non-toxic and resists damage from cleaning agents. It is retardant and specially formulated for use as a thermally conductive insulator. SIL-PAD 1500 Sil-Pad 1500 is an economical, high performance insulator with a thickness between that of Sil-Pad 1000 and Sil-Pad SIL-PAD 2000 Sil-Pad 2000 is Bergquist’s high performance, high reliability thermally conductive insulator. Sil-Pad 2000 is designed for demanding military / aerospace and commercial applications. In these applications, Sil-Pad 2000 complies with military standards. This silicone elastomer is specially to maximize the thermal and dielectric performance of the / binder matrix. The result is a “grease-free”, conformable material capable of meeting or exceeding the thermal and electrical requirements of high reliability electronic packaging applications. Sil-Pad 2000 is also available in thicknesses from to Die-Cut parts, Rolls and Sheets Sil-Pad 1000, 1500 and 2000 are available in die-cut parts and sheets 6" x 6" min., 6" x 12", 8" x 8", 10" x 10" and 12" x Only Sil-Pad 1000 and 1500 are available in roll form. SIL-PAD 2000 Outgassing Data for Spacecraft Materials %TML %CVCM Post Cure Max Conditions Acceptable 24 hrs. 175°C No Post Cure MIL SPEC. MIL-M-38527/08 MIL-I-49456 MIL-I-49466/02 MIL-M-87111 U.L. FILE NUMBER E59150 FSCM NUMBER 55285 Physical Properties Color Thickness Inches mm Elongation, % 45° to warp and Hardness, Shore A ± 5 Breaking Strength Lbs/inch kN/m Tensile Strength, kPsi MPa Thermal Vacuum Weight Loss % TML as manufactured Volatile Condensable Material % CVCM as manufactured Gravity Continuous Use Temp., °C Construction Thermal Properties Thermal Resistance, °C/-in2/W Thermal Conductivity, W/m-K Electrical Properties Breakdown Voltage, Volts a-c Min. Dielectric Constant, 1000 Cps Hz Volume Resistivity, Ohm Metre Sil-Pad 1000 Pink ± ± 45 85 100 18 4 30 -60 to +180 Silicone/Fiberglass Sil-Pad 1000 Sil-Pad 1000 4500 1.0x1011 Sil-Pad 1500 Green ± ± 20 80 65 12 -60 to + 200 Silicone/Fiberglass Sil-Pad 1500 Sil-Pad 1500 4000 4 x 1011 Sil-Pad 2000 White ± 20 90 65 12 see -60 to +200 Silicone/Fiberglass Test Method Visual ASTM D 374 ASTM D 412 ASTM D 2240 ASTM D 1458 ASTM D 412 NASA SP-R-0022A NASA SP-R-0022A ASTM D 792 -- Sil-Pad 2000 Test Method ASTM D 5470 ASTM D 5470

PDF Datasheet Preview

HIGH PERFORMANCE Sil-Pad Sil-Pad and Sil-Pad

SIL-PAD 1000

Sil-Pad 1000 has the same excellent mechanical and physical characteristics of our Sil-Pad 400 material while offering a 35% reduction in thermal resistance.

Sil-Pad 1000 is a composite of silicone rubber and It is specially and offers low thermal resistance. Sil-Pad 1000 is non-toxic and resists damage from cleaning agents. It is retardant and specially formulated for use as a thermally conductive insulator.

SIL-PAD 1500

Sil-Pad 1500 is an economical, high performance insulator with a thickness between that of Sil-Pad 1000 and Sil-Pad

SIL-PAD 2000

Sil-Pad 2000 is Bergquist’s high performance, high reliability thermally conductive insulator. Sil-Pad 2000 is designed for demanding military / aerospace and commercial applications. In these applications, Sil-Pad 2000 complies with military standards. This silicone elastomer is specially to maximize the thermal and dielectric performance of the / binder matrix. The result is a “grease-free”, conformable material capable of meeting or exceeding the thermal and electrical requirements of high reliability electronic packaging applications. Sil-Pad 2000 is also available in thicknesses from to

Die-Cut parts, Rolls and Sheets

Sil-Pad 1000, 1500 and 2000 are available in die-cut parts and sheets 6" x 6" min., 6" x 12", 8" x 8", 10" x 10" and 12" x Only Sil-Pad 1000 and 1500 are available in roll form.

SIL-PAD 2000 Outgassing Data for Spacecraft Materials
%TML
%CVCM

Post Cure Max

Conditions Acceptable
24 hrs.
175°C

No Post Cure

MIL SPEC. MIL-M-38527/08 MIL-I-49456 MIL-I-49466/02 MIL-M-87111 U.L. FILE NUMBER E59150 FSCM NUMBER 55285

Physical Properties

Color Thickness Inches mm Elongation, % 45° to warp and Hardness, Shore A ± 5 Breaking Strength Lbs/inch kN/m Tensile Strength, kPsi MPa Thermal Vacuum Weight Loss % TML as manufactured Volatile Condensable Material % CVCM as manufactured Gravity Continuous Use Temp., °C Construction

Thermal Properties

Thermal Resistance, °C/-in2/W Thermal Conductivity, W/m-K

Electrical Properties

Breakdown Voltage, Volts a-c Min. Dielectric Constant, 1000 Cps Hz Volume Resistivity, Ohm Metre

Sil-Pad 1000 Pink ± ± 45 85 100 18 4 30
-60 to +180 Silicone/Fiberglass

Sil-Pad 1000

Sil-Pad 1000 4500 1.0x1011

Sil-Pad 1500 Green ± ± 20 80 65 12
-60 to + 200 Silicone/Fiberglass

Sil-Pad 1500

Sil-Pad 1500 4000 4 x 1011

Sil-Pad 2000 White ± 20 90 65 12
see -60 to +200 Silicone/Fiberglass

Test Method

Visual

ASTM D 374 ASTM D 412 ASTM D 2240 ASTM D 1458 ASTM D 412 NASA SP-R-0022A NASA SP-R-0022A ASTM D 792 --

Sil-Pad 2000

Test Method

ASTM D 5470 ASTM D 5470

More datasheets: 50739181572600F | 634 | 50644-1540FB | 50644-1600FD | 50644-1600E | 50644-1600ED | 50644-1540E | AT83SND2CMP3A1-7FTUL | 1009AC-60 | 1009-58

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1009-54 Datasheet file may be downloaded here without warranties.

Datasheet ID: 1009-54 521731