S560-6600-EZ-F

S560-6600-EZ-F Datasheet


S560-6600-EZ

Part Datasheet
S560-6600-EZ-F S560-6600-EZ-F S560-6600-EZ-F (pdf)
PDF Datasheet Preview
G.SHDSL Magnetics

TM02304
• Designed to comply with the requirements of UL1950,
• Operating and storage temperature range -40° to +85° C

BABT, CSA950, AS/N253260 and EN60950 to provide
a supplementary insulation barrier with a working
• Meets IEC 695, 2-2 flammability requirements
voltage of 250V
• PWB Process Capability standard printed wiring board
• Minimum interwinding breakdown voltage of 1500 Vrms
assembly techniques, total-immersion cleaning
• Minimum interwinding breakdown voltage of 600 Vrms
• Reliability testing shock, vibration, temperature cycling,
between pin 9 and 10 for 1 minute
temperature - humidity - bias

ELECTRICAL SPECIFICATIONS AT 25° C

Turns Ratio ±2%

Inductance1 mH ±5%

Leakage Inductance2
µH max

Chip Line Side Chip Side

Longitudinal Balance dB min

Chip Side

Line Side
10 kHz 400 kHz

Insertion Loss
dB max
300 kHz

S560-6600-EZ

Harmonic Distortion3
dB max
dBm 5 kHz

All measurements are made with pins 2 and 4 connected and pins 1 and 9 connected Inductance measured at 10 kHz, Vac Measured at 100 kHz, Vac Measured with line impedance of 135 and chip impedance of

SCHEMATIC

S560-6600-EZ

Line
2006 Bel Fuse Inc. Specifications subject to change without notice.

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302
• Tel 201-432-0463
• Fax 201-432-9542
• page 1

TM02304

MECHANICAL S560-6600-EZ

D.C. S560-6600 -EZ

MAX.

G.SHDSL Magnetics
More datasheets: AON6542 | M39140 SL001 | M39140 SL005 | M39140 SL002 | APE12M05 | 2683 | 882250 SL001 | 882250 SL005 | 882250 SL002 | HMC543LC4B


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived S560-6600-EZ-F Datasheet file may be downloaded here without warranties.

Datasheet ID: S560-6600-EZ-F 522029