SE308-T

SE308-T Datasheet


5 & 8 port, SNMP, Modbus/TCP Models SE305-T, SE308-T

Part Datasheet
SE308-T SE308-T SE308-T (pdf)
Related Parts Information
SEG308-T SEG308-T SEG308-T
SE305-T SE305-T SE305-T
SEG305-T SEG305-T SEG305-T
PDF Datasheet Preview
Monitored Ethernet Switches
5 & 8 port, SNMP, Modbus/TCP Models SE305-T, SE308-T

SE305-T

SE308-T
• Communicates with HMI/SCADA software via Modbus/TCP
• Integrated with iView2 - SNMP Management Software free download
• Energy Efficient Ethernet EEE , IEEE 802.3az for low energy consumption
• Wide temperature range -40 to 75°C
• DIN rail or wall/panel mountable
• Dual 12 to 48 VDC power inputs for redundancy
• EMS Level 3 Protection
• Designed for hazardous locations UL C1D2, ATEX Zone 2 pending , IECEx pending
• Port-based QoS feature for deterministic data transmission
• Loop detection and event alarm
• Power failure indicated by a relay and LED indicator

Introduction SE300 series is the industry’s first design for Ethernet IEEE802.3az - Energy

Ethernet switches that cut power usage by up to 60%, significantly saving energy
usage in the field and reducing total cost of ownership over

Advantech B+B SmartWorx SE300 series monitored switches can be used as plugand-play unmanaged switches right out of the box. Installing the Network Management Software gives them basic monitoring and management capabilities as well. They bridge the gap between unmanaged switches and significantly more expensive, fully managed solutions.

When enabled with iView2, these switches provide IP address assignment, allowing for a static IP address or an address that is discoverable via DHCP in the network. Then, these switches have the ability to use Modbus/TCP to communicate with HMI/SCADA software and SNMP to communicate with NMS Networking Management Software at the same time. This gives full access control to both control engineers and IT managers.

Specifications

COMMUNICATIONS

Standards

IEEE 802.3u, 802.3x, 802.1p, 802.3az
10/100Base-T X

Transmission Distance Up to 100 meters

Transmission Speed
100 Mbps

INTERFACE Connectors Ethernet LED Indicators

SE305-T 5 x RJ45. SE308-T 8 x RJ45 6-pin removable screw terminal power & relay

Auto Sensing, 10/100BaseTX, Duplex and MDIX

P1, P2, P-Fail, Loop detection 10/100T X Link/Activity, Speed

Basic Monitoring & Management Capabilities iView2 gives network managers the ability to monitor and manage eWorx SE300 series switches from a central location. It features an intuitive Graphical User Interface GUI that provides a real-life representation of all installed eWorx SE300 Series switches, displaying device functions, port settings, device status information and traffic statistics via SNMP.
iView2 can also configure eWorx SE300 series switches monitoring capabilities for automation applications via the popular Modbus TCP/IP protocol. Control engineers can use existing HMI/SCADA software to integrate the network status by creating extra tags for real-time monitoring. iView2 is a standalone software that supports multiple platforms and operating systems.
iView2 Features for eWorx SE300 series Switches Monitoring
• System information IP/MAC address
• Port status
• Port speed
• Flow control
• Link up counter
• TX packets counter, RX packets counter
• TX error packets counter, RX error packets counter
• Firmware version
• PoE status PoE model/s only

Management
• Configure IP mode
• Set IP address
• Set TCP Modbus/TCP time-out
• Create Community Strings
• Configure Traps
/ Enabling an Intelligent Planet

All product specifications are subject to change without notice. SE305-T & SE308-T_1816

Monitored Ethernet Switches
5 & 8 port, SNMP, Modbus/TCP Models SE305-T, SE308-T

Specifications - continued

SWITCH PROPERTIES

MAC Table Size

SE305-T 2k. SE308-T 8k

Packet Buffer Size

SE305-T 1M bit. SE308-T 128K bit

Switching Capacity

SE305-T 1Gbps. SE308-T Gbps

Jumbo Frame

SE305-T 9216 bytes. SE308-T 2048 bytes

POWER
Product Ordering Information

RJ45

MODEL # DESCRIPTION

OPERATING TEMPERATURE
10/100 MBPS

GIGABIT
100FX
100/1000BASE-SFP

SE305-T 5-port 10/100 Monitored Ethernet Switch -40~75°C

SE308-T 8-port 10/100 Monitored Ethernet Switch -40~75°C

FIBER

COMBO PORT, 10/100/1000BASE-T X OR 100/1000BASE-SFP

TYPE CONNECTOR

Accessories - optional

MODEL #

MDR-40-24

DIN Rail Power supply, 24VDC 40 Watt

C5UMB3FBG
3 ft. 1 M , Gray, Category 5e UTP Patch Cord

C5UMB7FBG
7 ft. 2 M , Gray, Category 5e UTP Patch Cord

Package Checklist

Ethernet Switch, Quick Start Guide, DIN-Rail mount bracket installed , Wall mount bracket

Warranty

Limited lifetime warranty for Advantech B+B designed and/or manufactured products.

Corporate Headquarters 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445

Model SE305-T Mechanical Diagram | DIN Rail & Panel Mount Options

Units = [inches] mm

Model SE308-T Mechanical Diagram | DIN Rail & Panel Mount Options

Units = [inches] mm
120120
120120
238 38 46
130130

Corporate

Headquarters:

Dayton

Road,

PO Box
1040

Ottawa,
More datasheets: FJC1308QTF | FJC1308RTF | CY62148VNLL-70SXI | CY62148VNLL-70ZSXI | CY62148VNLL-70ZSXIT | B39389L9653M100 | 1125 | SEG308-T | SE305-T | SEG305-T


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SE308-T Datasheet file may be downloaded here without warranties.

Datasheet ID: SE308-T 521537