EIR418-2SFP-T

EIR418-2SFP-T Datasheet

Part	Datasheet
EIR418-2SFP-T	EIR418-2SFP-T (pdf)

PDF Datasheet Preview
B&B ELECTRONICS EIR418-2SFP-T-0812ds page 1/3 2009 B&B Electronics. All rights reserved Elinx EIR418-2SFP-T 18 Port Gigabit Industrial Ethernet Switch with 2 RJ-45/SFP Combo Ports for Gigabit Ethernet 9 16 10/100 Base-T Ethernet Ports 9 2 RJ-45/SFP Combo Ports for Gigabit Ethernet 9 3000V EFT & 6000V ESD Protection 9 Dual 12 to 48 VDC Power Inputs 9 Wide Operating Temperature The EIR418-2SFP-T is an 18 Port Unmanaged Industrial Gigabit Ethernet Switch. In addition to 16 standard copper RJ-45 ports, it has 2 SFP Combo slots to accommodate Gigabit Fiber. Small Form-factor Pluggable SFP Port The SFP Port provides flexibility when planning a network. Modules are available in multiple fiber formats. If an SFP module is not inserted, the associated combo port can be used with standard RJ-45 copper. High-Speed Transmissions The EIR418-2SFP-T includes a switch controller that automatically senses transmission speed 10/100/1000 Mbps . The RJ-45 interface also auto-detects MDI or MDI-X, eliminating the requirement for a crossover cable. Each port is buffered and supports store-and-forward protocol. Dual Power Input To reduce the risk of power failure, the EIR418-2SFP-T provides two 12 to 48 VDC power inputs. If the power fails, the switch will automatically use the secondary power input. Also, if the power goes out the corresponding P1 or P2 LED will go out and the Fault LED will light. The contacts for the alarm output will also open. Flexible Mounting The switch features an IP30 metal enclosure that can be DIN or Panel mounted. Transient Protection The power line input on the EIR405-T offers protection from up to 3,000 V EFT. The Ethernet ports offer up to 6,000 V ESD protection. These features make the switch reliable and suitable for use in harsh electrical environments. Wide Operating Temperature With an operating temperature of -40 to 75°C -40 to 167rF , this switch is suitable for use in harsh industrial environments. Easy Troubleshooting There are two LED indicators for each port that display the link status and transmission speed. Three LED indicators for power P1, P2 and Fault show power status. These indicators allow you to quickly diagnose and correct problems and ensure your network remains reliable. B&B Electronics’ Elinx Brand Ethernet Switches are your number one choice for reliable performance in harsh industrial environments. Ordering Information Model Number EIR418-2SFP-T Industrial Gigabit Switch 16 CU, 2 SFP Accessories SFP-100FX-M-2KM-T SFP 100Base-FX, MM 2KM, LC SFP-100FX-S-30KM-T SFP 100Base-FX, SM 20KM, LC SFP-1000SX-M-550M-T SFP 1000Base-FX, MM 550M, LC SFP-1000LX-S-10KM-T SFP 1000Base-FX, SM 10 KM, LC SFP-1000LX-S-20KM-T SFP, 1000Base-FX, SM 20 KM, LC MDR-60-24 24VDC, 2.5A DIN Mount Power Supply Approvals Free Fall Shock Vibration Specifications Regulatory FCC, CE, UL File Number E173795 IEC60068-2-32 IEC60068-2-27 IEC60068-2-6 International Office 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 PRODUCT INFORMATION B&B ELECTRONICS IEEE 802.3u IEEE 802.3ab IEEE 802.3x Architecture Transfer Rate Buffer MAC Table Miscl RJ-45 Ports ESD Protection SFP LED Indicators Specifications IEEE Standards 10Base-T Ethernet 100Base-TX and 100Base-FX Fast Ethernet 1000Base-T Flow Control and Back Pressure Network Specifications Back-plane Switching Fabric Gbps Throughput Full-dux 14,880 pps Ethernet Port 148,800 pps Fast Ethernet Port 1,488,000 pps Gigibit Fiber Ethernet 1 MB 8K Broadcast Storm Filtering CSMA/CD Interface 16 x10/100 BaseT, Auto MDI/MDI-X 6000V ESD Protection 2 x Mini-GBIC SFP Combo Ports or 2 RJ-45 10/100/1000 BaseT P1 Power 1 , P2 Power 2 , Fault Power Fault , LINK/ACT SFP Ports RJ-45 Ports have 2 LED’s to indicate LINK and activity EIR418-2SFP-T-0812ds page 2/3 2009 B&B Electronics. All rights reserved Input Voltage Power Connection Wire Size Power Use Fault Output EFT Protection Op. Temp Storage Temp Op. Humidity Enclosure Mounting Dimensions Environmental - 40 to 75°C -40 to 167°F - 40 to 85°C -40 to 185°F 0 to 95% Mechanical IP30 Metal Enclosure 35mm DIN Rail or Panel Mount Attachments 2.86x4.19x6.06 in 7.26x10.64x15.39 cm PRODUCT INFORMATION International Office 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 B&B ELECTRONICS EIR418-2SFP-T-0812ds page 3/3 2009 B&B Electronics. All rights reserved International Office 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 PRODUCT INFORMATION

PDF Datasheet Preview

B&B ELECTRONICS

EIR418-2SFP-T-0812ds page 1/3 2009 B&B Electronics. All rights reserved

Elinx EIR418-2SFP-T
18 Port Gigabit Industrial Ethernet Switch with 2 RJ-45/SFP Combo Ports for Gigabit Ethernet
9 16 10/100 Base-T Ethernet Ports 9 2 RJ-45/SFP Combo Ports for Gigabit Ethernet 9 3000V EFT & 6000V ESD Protection 9 Dual 12 to 48 VDC Power Inputs 9 Wide Operating Temperature

The EIR418-2SFP-T is an 18 Port Unmanaged Industrial Gigabit Ethernet Switch. In addition to 16 standard copper RJ-45 ports, it has 2 SFP Combo slots to accommodate Gigabit Fiber. Small Form-factor Pluggable SFP Port The SFP Port provides flexibility when planning a network. Modules are available in multiple fiber formats. If an SFP module is not inserted, the associated combo port can be used with standard RJ-45 copper. High-Speed Transmissions The EIR418-2SFP-T includes a switch controller that automatically senses transmission speed 10/100/1000 Mbps . The RJ-45 interface also auto-detects MDI or MDI-X, eliminating the requirement for a crossover cable. Each port is buffered and supports store-and-forward protocol. Dual Power Input To reduce the risk of power failure, the EIR418-2SFP-T provides two 12 to 48 VDC power inputs. If the power fails, the switch will automatically use the secondary power input. Also, if the power goes out the corresponding P1 or P2 LED will go out and the Fault LED will light. The contacts for the alarm output will also open. Flexible Mounting The switch features an IP30 metal enclosure that can be DIN or Panel mounted. Transient Protection The power line input on the EIR405-T offers protection from up to 3,000 V EFT. The Ethernet ports offer up to 6,000 V ESD protection. These features make the switch reliable and suitable for use in harsh electrical environments. Wide Operating Temperature With an operating temperature of
-40 to 75°C -40 to 167rF , this switch is suitable for use in harsh
industrial environments. Easy Troubleshooting There are two LED indicators for each port that display the link status and transmission speed. Three LED indicators for power P1, P2 and Fault show power status. These indicators allow you to quickly diagnose and correct problems and ensure your network remains reliable.

B&B Electronics’ Elinx Brand Ethernet Switches are your number one choice for reliable performance in harsh industrial environments.
Ordering Information

Model Number

EIR418-2SFP-T

Industrial Gigabit Switch 16 CU, 2 SFP

Accessories

SFP-100FX-M-2KM-T SFP 100Base-FX, MM 2KM, LC

SFP-100FX-S-30KM-T SFP 100Base-FX, SM 20KM, LC

SFP-1000SX-M-550M-T SFP 1000Base-FX, MM 550M, LC

SFP-1000LX-S-10KM-T SFP 1000Base-FX, SM 10 KM, LC

SFP-1000LX-S-20KM-T SFP, 1000Base-FX, SM 20 KM, LC

MDR-60-24
24VDC, 2.5A DIN Mount Power Supply

Approvals

Free Fall Shock Vibration

Specifications

Regulatory FCC, CE, UL File Number E173795 IEC60068-2-32 IEC60068-2-27 IEC60068-2-6

International Office 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445

PRODUCT INFORMATION

B&B ELECTRONICS

IEEE 802.3u IEEE 802.3ab IEEE 802.3x

Architecture

Transfer Rate

Buffer MAC Table Miscl

RJ-45 Ports ESD Protection SFP

LED Indicators

Specifications

IEEE Standards 10Base-T Ethernet 100Base-TX and 100Base-FX Fast Ethernet 1000Base-T Flow Control and Back Pressure Network Specifications Back-plane Switching Fabric Gbps Throughput Full-dux 14,880 pps Ethernet Port 148,800 pps Fast Ethernet Port 1,488,000 pps Gigibit Fiber Ethernet 1 MB 8K Broadcast Storm Filtering CSMA/CD

Interface 16 x10/100 BaseT, Auto MDI/MDI-X 6000V ESD Protection 2 x Mini-GBIC SFP Combo Ports or 2 RJ-45 10/100/1000 BaseT P1 Power 1 , P2 Power 2 , Fault Power Fault , LINK/ACT SFP Ports RJ-45 Ports have 2 LED’s to indicate LINK and activity

EIR418-2SFP-T-0812ds page 2/3 2009 B&B Electronics. All rights reserved

Input Voltage

Power Connection Wire Size Power Use Fault Output EFT Protection

Op. Temp Storage Temp Op. Humidity

Enclosure Mounting Dimensions

Environmental - 40 to 75°C -40 to 167°F - 40 to 85°C -40 to 185°F 0 to 95%

Mechanical IP30 Metal Enclosure 35mm DIN Rail or Panel Mount Attachments 2.86x4.19x6.06 in 7.26x10.64x15.39 cm

PRODUCT INFORMATION

International Office 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445

B&B ELECTRONICS

EIR418-2SFP-T-0812ds page 3/3 2009 B&B Electronics. All rights reserved

International Office 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445

PRODUCT INFORMATION

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EIR418-2SFP-T Datasheet file may be downloaded here without warranties.

Datasheet ID: EIR418-2SFP-T 521509