EIR408-T

EIR408-T Datasheet

EIR408-T

Part	Datasheet
EIR408-T	EIR408-T (pdf)

PDF Datasheet Preview
8 Port Gigabit Industrial Ethernet Switch EIR408-T PRODUCT FEATURES The EIR408-T is an 8 Port Unmanaged Industrial Gigabit Ethernet Switch. Packed full of rugged features, this switch is perfect for your high speed industrial network. High-Speed Transmissions The EIR408-T includes a switch controller that automatically senses transmission speed 10/100/1000 Mbps . The RJ-45 interface also auto-detects MDI or MDI-X, eliminating the requirement for a crossover cable. Each port is buffered and supports store-and-forward protocol. Dual Power Input To reduce the risk of power failure, the EIR408-T provides two 12 to 48 VDC power inputs. If the power fails, the switch will automatically use the secondary power input. Also, if the power goes out the corresponding P1 or P2 LED will go out and the Fault LED will light. The contacts for the alarm output will also open. Flexible Mounting The switch features a space saving IP30 metal enclosure that can be DIN or Panel mounted. Wide Operating Temperature With an operating temperature of -40 to 75°C -40 to 167°F , this switch can be used in harsh industrial environments. Easy Troubleshooting There are two LED indicators for each port that display the link status and transmission speed. Three LED indicators for power P1, P2 and Fault show power status. These indicators allow you to quickly diagnose and correct problems and ensure your network remains reliable. ORDERING INFORMATION MODEL NUMBER EIR408-T 8 Port Industrial Gigabit Switch ACCESSORIES C5UMB7FBG - Category 5e, 7 ft. M , Grey EIRSP1 - Industrial Ethernet Surge Suppressor MDR-20-24 - DIN rail mount power supply 24VDC, A output power MDR-40-24 - DIN rail mount power supply 24VDC, A output power MDR-60-24 - DIN rail mount power supply 24VDC, A output power EIR408-T_3713ds 8 Port Gigabit Industrial Ethernet Switch EIR408-T SPECIFICATIONS IEEE STANDARDS IEEE 10Base-T Ethernet IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet IEEE 802.3ab 1000Base-T IEEE 802.3x Flow Control and Back Pressure NETWORK SPECIFICATIONS Architecture Transmission Speed Back-plane Switching Fabric 10Gbps Throughput Full-dux : Up to 1000 Mbps Buffer 136 Kbits MAC Table Jumbo Frame 9.6Kbytes Other Broadcast Storm Protection INTERFACE RJ-45 Ports 8 x 10/100/1000BaseT, Auto MDI/MDI-X LED Indicators P1 Power 1 , P2 Power 2 , Fault Power Fault , RJ-45 Ports have 2 LED’s to indicate LINK and activity POWER Input Voltage Power Connection Removable Terminal Block Wire Size 12 to 24 AWG Power Use

PDF Datasheet Preview

8 Port Gigabit Industrial Ethernet Switch

EIR408-T

PRODUCT FEATURES

The EIR408-T is an 8 Port Unmanaged Industrial Gigabit Ethernet Switch. Packed full of rugged features, this switch is perfect for your high speed industrial network.

High-Speed Transmissions The EIR408-T includes a switch controller that automatically senses transmission speed 10/100/1000 Mbps . The RJ-45 interface also auto-detects MDI or MDI-X, eliminating the requirement for a crossover cable. Each port is buffered and supports store-and-forward protocol.

Dual Power Input To reduce the risk of power failure, the EIR408-T provides two 12 to 48 VDC power inputs. If the power fails, the switch will automatically use the secondary power input. Also, if the power goes out the corresponding P1 or P2 LED will go out and the Fault LED will light. The contacts for the alarm output will also open.

Flexible Mounting The switch features a space saving IP30 metal enclosure that can be DIN or Panel mounted.

Wide Operating Temperature With an operating temperature of -40 to 75°C -40 to 167°F , this switch can be used in harsh industrial environments.

Easy Troubleshooting There are two LED indicators for each port that display the link status and transmission speed. Three LED indicators for power P1, P2 and Fault show power status. These indicators allow you to quickly diagnose and correct problems and ensure your network remains reliable.
ORDERING INFORMATION

MODEL NUMBER

EIR408-T
8 Port Industrial Gigabit Switch

ACCESSORIES

C5UMB7FBG - Category 5e, 7 ft. M , Grey EIRSP1 - Industrial Ethernet Surge Suppressor MDR-20-24 - DIN rail mount power supply 24VDC, A output power MDR-40-24 - DIN rail mount power supply 24VDC, A output power MDR-60-24 - DIN rail mount power supply 24VDC, A output power

EIR408-T_3713ds
8 Port Gigabit Industrial Ethernet Switch

EIR408-T

SPECIFICATIONS

IEEE STANDARDS

IEEE
10Base-T Ethernet

IEEE 802.3u
100Base-TX and 100Base-FX Fast Ethernet

IEEE 802.3ab
1000Base-T

IEEE 802.3x

Flow Control and Back Pressure

NETWORK SPECIFICATIONS

Architecture Transmission Speed

Back-plane Switching Fabric 10Gbps Throughput Full-dux :

Up to 1000 Mbps

Buffer
136 Kbits

MAC Table

Jumbo Frame
9.6Kbytes

Other

Broadcast Storm Protection

INTERFACE

RJ-45 Ports
8 x 10/100/1000BaseT, Auto MDI/MDI-X

LED Indicators

P1 Power 1 , P2 Power 2 , Fault Power Fault , RJ-45 Ports have 2 LED’s to indicate LINK and activity

POWER

Input Voltage Power Connection

Removable Terminal Block

Wire Size
12 to 24 AWG

Power Use

More datasheets: 50004-5400H | 50004-5488E | 50004-1344E | 50004-1352E | 50004-1360E | 50004-1368H | 50004-5368H | 50004-5392F | 50004-1392H | 18065USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EIR408-T Datasheet file may be downloaded here without warranties.

Datasheet ID: EIR408-T 521506