278071110002833

278071110002833 Datasheet

Part	Datasheet
278071110002833	278071110002833 (pdf)

Related Parts	Information
278071110012833	278071110012833

PDF Datasheet Preview
J1/J4 Type A Right Angle Female for Daughter Cards Series 8071 • 110 signal contacts in a 5 x 25 configuration • Center cavity with pre-alignment guides and keying option uses 3 positions • See page 53 for keying options • Designed for gas tight press-fit installation • Supplied with or without upper ground return shield • Available with bottom pegs for secure P.C. mounting • This connector can be used by itself or in conjunction with Style B or C connectors • Used in positions J1/J4 of specification Daughter Card • Lower ground return shield available see page 30 27 8071 110 001 833 = Type A Right Angle Female without top shield, with pegs 27 8071 110 002 833 = Type A Right Angle Female without top shield, without pegs 27 8071 110 011 833 = Type A Right Angle Female with top shield, with pegs 27 8071 110 012 833 = Type A Right Angle Female with top shield, without pegs Plating Code 833 Contact Area 0.1µm min. Au.65µm Pd/Ni Press-fit Area 1.5-3.0µm Solder Under Coat Nickel 1.2-3.0µm 9Z21XX 25 2X10=20.0 TYP. 2X4=8.0 2x24=48.0 TYP. 2X10=20.0 MAX. 2x5=10.0±0.1 TYP. TYP. 2x10=20.0±0.1 2x12=24.0±0.1 2x14=28.0±0.1 2x24=48.0±0.1 RECOMMENDED P.C. BOARD LAYOUT COMPONENT SIDE 135- f HOLES f e d c b a a bc d e f HO2-LE2.0±0.1 MAX. ELCO

PDF Datasheet Preview

J1/J4 Type A Right Angle Female for Daughter Cards

Series 8071
• 110 signal contacts in a 5 x 25 configuration
• Center cavity with pre-alignment guides and keying option uses
3 positions
• See page 53 for keying options
• Designed for gas tight press-fit installation
• Supplied with or without upper ground return shield
• Available with bottom pegs for secure P.C. mounting
• This connector can be used by itself or in conjunction with Style B
or C connectors
• Used in positions J1/J4 of specification Daughter

Card
• Lower ground return shield available see page 30
27 8071 110 001 833 = Type A Right Angle Female without top shield, with pegs 27 8071 110 002 833 = Type A Right Angle Female without top shield, without pegs 27 8071 110 011 833 = Type A Right Angle Female with top shield, with pegs 27 8071 110 012 833 = Type A Right Angle Female with top shield, without pegs

Plating Code 833

Contact Area 0.1µm min. Au.65µm Pd/Ni

Press-fit Area 1.5-3.0µm Solder

Under Coat Nickel 1.2-3.0µm
9Z21XX
25 2X10=20.0

TYP. 2X4=8.0
2x24=48.0

TYP. 2X10=20.0

MAX.
2x5=10.0±0.1 TYP.

TYP.
2x10=20.0±0.1
2x12=24.0±0.1
2x14=28.0±0.1
2x24=48.0±0.1

RECOMMENDED P.C. BOARD LAYOUT COMPONENT SIDE
135- f HOLES
f e d c b a
a bc d e f

HO2-LE2.0±0.1

MAX.

ELCO

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 278071110002833 Datasheet file may be downloaded here without warranties.

Datasheet ID: 278071110002833 521311