600591

600591 Datasheet

RF600591 Dry Inlay Wide Web x in 95 x mm N/A

Part	Datasheet
600591	600591 (pdf)

Related Parts	Information
600593	600593
600592	600592

PDF Datasheet Preview
UHF RFID Inlays AD-229r6 Dimensions Operating Frequency RF Protocol Chip EPC Memory TID Memory 95 x mm Global 860 960 MHz ISO-18000-6C, EPC Class 1, Gen 2 Impinj Monza R6 96 bit 96 bits with 48 bit unique serial number Common Applications Supply Chain, Inventory and Logistics Apparel and other item-level retail Toll free US 866-903- RFID 7343 / International +1-770-965-0807 PART NUMBER Format Antenna dimensions CDxMD Die-cut dimensions RF600591 Dry Inlay Wide Web x in 95 x mm N/A RF600592 Dry Inlay x in 95 x mm N/A Inlay substrate material Inlay-to-liner adhesive Liner material Face Sheet Standard pitch Standard web width Total thickness over chip Operating temperature RoHS Quality assurance Un-wind direction Core size with adaptor insert Maximum roll outer diameter not to exceed Average # of units per roll Rev White PET N/A N/A N/A in mm in mm 9-11 mils 230-290 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested withof-tolerance inlay marked Inlay-side Out 6 in mm 13 in mm 20,000 good +/- 10% 00 White PET N/A N/A N/A in mm in mm 9-11 mils 230-290 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested with-oftolerance inlay marked Inlay-side Out 6 in mm 17 in mm 20,000 good +/- 10% RF600593 Wet Inlay x in 95 x mm x in x mm White PET S-490 FASSON 40# SCK N/A in mm 9 -12 mils 220-300 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested with-oftolerance inlay marked PS Inlay-side Out 3 in 76.2mm 13 in 330.2mm 20,000 good 00 Care and handling RFID inlays are sensitive to ESD. Observe standard practices to keep environmental static charge to a minimum. Applications This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Warranty Please refer to Avery Dennison RFID standard terms and conditions. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data. Product changes Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. Trademark statement Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit 2015 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA

PDF Datasheet Preview

UHF RFID Inlays

AD-229r6

Dimensions Operating Frequency

RF Protocol Chip

EPC Memory TID Memory
95 x mm Global 860 960 MHz ISO-18000-6C, EPC Class 1, Gen 2 Impinj Monza R6 96 bit 96 bits with 48 bit unique serial number

Common Applications Supply Chain, Inventory and Logistics Apparel and other item-level retail

Toll free US 866-903- RFID 7343 / International +1-770-965-0807

PART NUMBER Format Antenna dimensions CDxMD Die-cut dimensions

RF600591 Dry Inlay Wide Web x in 95 x mm N/A

RF600592 Dry Inlay x in 95 x mm N/A

Inlay substrate material Inlay-to-liner adhesive Liner material Face Sheet Standard pitch Standard web width Total thickness over chip

Operating temperature RoHS

Quality assurance

Un-wind direction Core size with adaptor insert Maximum roll outer diameter not to exceed Average # of units per roll Rev

White PET N/A N/A N/A in mm in mm 9-11 mils 230-290 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested withof-tolerance inlay marked Inlay-side Out 6 in mm 13 in mm
20,000 good +/- 10% 00

White PET N/A N/A N/A in mm in mm 9-11 mils 230-290 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested with-oftolerance inlay marked Inlay-side Out 6 in mm 17 in mm
20,000 good +/- 10%

RF600593 Wet Inlay x in 95 x mm x in x mm White PET S-490 FASSON 40# SCK N/A in mm 9 -12 mils 220-300 microns -40 to 185F -40 to 85C EU Directive 2011/65/EU Compliant 100% read tested with-oftolerance inlay marked PS Inlay-side Out 3 in 76.2mm 13 in 330.2mm
20,000 good 00

Care and handling RFID inlays are sensitive to ESD. Observe standard practices to keep environmental static charge to a minimum.

Applications This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use.

Warranty Please refer to Avery Dennison RFID standard terms and conditions. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.

Product changes Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice.

Trademark statement Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit
2015 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA

More datasheets: DFR0224 | 10315 | A8220 | AHB1348GHE-CZ41 | 3141 | 3129 | AOL1412 | 19041196A | 600593 | 600592

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 600591 Datasheet file may be downloaded here without warranties.

Datasheet ID: 600591 521267