SE5001-S2(DB)

SE5001-S2(DB) Datasheet


•<br>• SE5001

Part Datasheet
SE5001-S2(DB) SE5001-S2(DB) SE5001-S2(DB) (pdf)
Related Parts Information
SE5001-S5(DB) SE5001-S5(DB) SE5001-S5(DB)
SE5001(DB) SE5001(DB) SE5001(DB)
PDF Datasheet Preview
Device Networking Access

RoHS-compliant
1-Port Serial Server

• SE5001
• Cigarette pack compact size
• Rugged metal case with wall or DIN-Rail mount
• 10/100Mbps Fast Ethernet full duplex auto negotiation
• Support TCP server/client, UDP, Virtual COM and

Tunneling modes
• Monitor, manage, and control industrial field devices
remotely
• Configuration Web Server page / Serial Console / Telnet

Console / Windows Utility
• Upgrade firmware from a remote-PC via Ethernet
• Redundant dual DC power inputs for non-stop operation

Make Serial Devices Ready to the Network The Industrial Serial Server SE5001 is a cost effective gateway for Ethernet TCP/IP and serial signal communications. It allows almost any serial device to be connected to a new or existing Ethernet network.

By encapsulating serial data and transporting it over Ethernet, SE5001 offers full-duplex and bi-directional data that is transmission transparent between the serial port and the Ethernet network.

Easy to Use Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web browser, Serial Console, or other Windows utilities. Packed in a rugged metal housing for wall or DIN-Rail mount with 5~30VDC wide power input range, SE5001 is ideal for almost any industrial and manufacturing automation.

ATOP Virtual COM software provides existing Windows based application to access serial device by mapping the Virtual COM port to a remote serial server via Ethenet.

Specially Designed for Automation Fields

In industrial and manufacturing automation fields, SE5001 is used as a field device to connect the Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.

Te c h n o l o g i e s

Ethernet Serial Server

SE5001

Specifications Ethernet

Compliance Port Transmission Rate Connector Auto MDI/MDI-X Link Mode TCP Server TCP Client UDP Serial Interface
Ports Baud Rate Parity Data Bits Stop Bits Flow Control Connector Protection Power Input Consumption Environment Operating Storage Dimension WxHxD Software Configuration Virtual Com Support Protocol Ordering Information 1P1SE5001S2001G SE5001-S2 1P1SE5001S5001GcSE5001-S5 1P1SE500100003GcSE5001 Optional Accessories Power Adapter

ADP-DB9 F -TB5

DK-25

IEEE802.3 1-port 10/100Mbps Auto-detection RJ-45 Yes

Single connection or Virtual Com mode Single destination or Virtual COM mode Up to 4 Ranges of IPs

RS-232 SE5001-S2 RS-422/485 software selectable SE5001-S5 RS-232/422/485 Software selectable SE5001 1-port 1200bps~230Kbps None, Odd, Even, Mark, Space 7, 8 1, 2 None, Software Xon/Xoff, Hardware RTS/CTS 9-pin D-Sub 15KV ESD

DC 5V and 9-30V Max. 1.5W
0°C ~ 60°C 32º ~ 140ºF -40º ~ 85ºC -40º~ 185ºF , 5 ~ 95%RH
65mm x 78mm x 28mm

Web Page / Telnet / Serial console / Windows utility Windows port redirection software ICMP, TCP UDP / IP, DHCP client, SNMP, Telnet
1-port RS-232 DB9 serial server without adapter 1-port RS-422/485 D-Sub serial server without adapter 1-port RS-232/422/485 D-Sub serial server without adapter

US315-12 US-TB3 3-pin Terminal block mm power adaptor, 100-240VAC input, 1.25A 12VDC output, US plug USE315-12 EU-TB3 3-pin Terminal block mm power adaptor, 100-240VAC input, 1.25A 12VDC output, EU plug UN305-0510 US-DC P/N:50500051500001G DC jack mm power adaptor, 100-240VAC input, A 5 VDC output, US plug UNE305-0510 EU-DC P/N:50500051500011G DC jack mm power adaptor, 100-240VAC input, A 5 VDC output, EU plug P/N:59906231G Female DB9 to Female 3.81mm TB5 Converter DIN Rail Kit

Atop Technologies, Inc.

Design and specification are subjected to change without notice. All product names referenced herein are registered trademarks of their respective companies.

TCP Server Mode

Host Computer

Ethernet

SE5001

Serial Bus PLC

TCP Client mode

Host Computer

Ethernet

SE5001

Card Reader Card Reader

SE5001

Serial Bus

UDP mode

Host Computer

Ethernet

SE5001

Serial Bus

Display

Tunneling mode

SE5001

Ethernet

SE5001

Serial Bus

Touch Screen
More datasheets: SA001A | SA008A | SA015A1T | GPM140-24 | GPM140-28 | GPM140-15 | GPM140-12 | AER03F05N | HG-3340S000 | CP0603V0836CNTR


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SE5001-S2(DB) Datasheet file may be downloaded here without warranties.

Datasheet ID: SE5001-S2(DB) 519532